[PATCH 1/4] drm/msm/hdmi: properly add and remove created bridges

[Stephen Boyd]

Quoting Dmitry Baryshkov (2022-04-05 16:45:48)
> Add calls to drm_bridge_add()/drm_bridge_remove() for the internal HDMI
> bridges. This fixes the following warning.
>
> [    2.195003] ------------[ cut here ]------------

Usually this line is left out

> [    2.195044] WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:579 __mutex_lock+0x840/0x9f4

And the timestamp is removed

> [    2.198774] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
> [    2.198786] Modules linked in:
> [    2.211868] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc1-00002-g3054695a0d27-dirty #55
> [    2.214671] Hardware name: Generic DT based system
> [    2.223265]  unwind_backtrace from show_stack+0x10/0x14
> [    2.228036]  show_stack from dump_stack_lvl+0x58/0x70
> [    2.233159]  dump_stack_lvl from __warn+0xc8/0x1e8
> [    2.238367]  __warn from warn_slowpath_fmt+0x78/0xa8
> [    2.243054]  warn_slowpath_fmt from __mutex_lock+0x840/0x9f4
> [    2.248174]  __mutex_lock from mutex_lock_nested+0x1c/0x24
> [    2.253818]  mutex_lock_nested from drm_bridge_hpd_enable+0x2c/0x84
> [    2.259116]  drm_bridge_hpd_enable from msm_hdmi_modeset_init+0xc0/0x21c
> [    2.265279]  msm_hdmi_modeset_init from mdp4_kms_init+0x53c/0x90c
> [    2.272223]  mdp4_kms_init from msm_drm_bind+0x514/0x698
> [    2.278212]  msm_drm_bind from try_to_bring_up_aggregate_device+0x160/0x1bc

I'd probably cut it off here.

Is there any Fixes tag for this? Still seems worthwhile to have one even
if this is a lockdep warning.