[PATCH v1 2/5] drm: bridge: dw_hdmi: enable overflow workaround for v2.13a
Neil Armstrong
narmstrong at baylibre.com
Wed Apr 6 09:17:25 UTC 2022
Hi,
On 06/04/2022 10:48, Sandor.yu at nxp.com wrote:
> From: Sandor Yu <Sandor.yu at nxp.com>
>
> iMX865 HDMI (v2.13a) have been identified as needing the workaround.
> Tests show that one iteration is enough.
>
> Without the workaround, iMX865 HDMI audio may not work
> after cable plugout/in, because HDMI mode is not really set in
> register HDMI_FC_INVIDCONF.
>
> Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index 4befc104d220..b11577de4836 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2087,9 +2087,9 @@ static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi)
> *
> * The number of iterations matters and depends on the HDMI TX revision
> * (and possibly on the platform). So far i.MX6Q (v1.30a), i.MX6DL
> - * (v1.31a) and multiple Allwinner SoCs (v1.32a) have been identified
> - * as needing the workaround, with 4 iterations for v1.30a and 1
> - * iteration for others.
> + * (v1.31a), iMX865(v2.13a) and multiple Allwinner SoCs (v1.32a)
> + * have been identified as needing the workaround,
> + * with 4 iterations for v1.30a and 1 iteration for others.
> * The Amlogic Meson GX SoCs (v2.01a) have been identified as needing
> * the workaround with a single iteration.
> * The Rockchip RK3288 SoC (v2.00a) and RK3328/RK3399 SoCs (v2.11a) have
> @@ -2106,6 +2106,7 @@ static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi)
> case 0x201a:
> case 0x211a:
> case 0x212a:
> + case 0x213a:
> count = 1;
> break;
At some point we must consider only v1.30a needs 4, and other needs 1.
It would be simpler to put the "count = 1" in a default case.
The comment change is still welcome so we can track.
Thanks,
Neil
> default:
More information about the dri-devel
mailing list