[PATCH 1/2] drm/modes: Make width-mm/height-mm check in of_get_drm_panel_display_mode() mandatory

[Marek Vasut]

All users of this function require width-mm/height-mm DT property to be
present per their DT bindings, make width-mm/height-mm check mandatory.
It is generally a good idea to specify panel dimensions, so userspace
can configure e.g. scaling accordingly.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Christoph Niedermaier <cniedermaier at dh-electronics.com>
Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: Dmitry Osipenko <digetx at gmail.com>
Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Cc: Noralf Trønnes <noralf at tronnes.org>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Robert Foss <robert.foss at linaro.org>
Cc: Sam Ravnborg <sam at ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann at suse.de>
To: dri-devel at lists.freedesktop.org
---
 drivers/gpu/drm/drm_modes.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 6e7e10f16ec03..f0b000ddaddb5 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -735,8 +735,8 @@ EXPORT_SYMBOL_GPL(of_get_drm_display_mode);
  * @dmode: will be set to the return value
  * @bus_flags: information about pixelclk, sync and DE polarity
  *
- * The Device Tree properties width-mm and height-mm will be read and set on
- * the display mode if they are present.
+ * The mandatory Device Tree properties width-mm and height-mm
+ * are read and set on the display mode.
  *
  * Returns:
  * Zero on success, negative error code on failure.
@@ -761,11 +761,11 @@ int of_get_drm_panel_display_mode(struct device_node *np,
 		drm_bus_flags_from_videomode(&vm, bus_flags);
 
 	ret = of_property_read_u32(np, "width-mm", &width_mm);
-	if (ret && ret != -EINVAL)
+	if (ret)
 		return ret;
 
 	ret = of_property_read_u32(np, "height-mm", &height_mm);
-	if (ret && ret != -EINVAL)
+	if (ret)
 		return ret;
 
 	dmode->width_mm = width_mm;
-- 
2.35.1