[PATCH 04/11] drm: bridge: samsung-dsim: Add DSI init in bridge pre_enable()

[Adam Ford]

On Fri, Apr 8, 2022 at 11:22 AM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> Host transfer() in DSI master will invoke only when the DSI commands
> are sent from DSI devices like DSI Panel or DSI bridges and this
> host transfer wouldn't invoke for I2C-based-DSI bridge drivers.
>
> Handling DSI host initialization in transfer calls misses the
> controller setup for I2C configured DSI bridges.
>
> This patch adds the DSI initialization from transfer to bridge
> pre_enable as the bridge pre_enable API is invoked by core as
> it is common across all classes of DSI device drivers.
>
> v1:
> * keep DSI init in host transfer
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  drivers/gpu/drm/bridge/samsung-dsim.c | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
> index ff05c8e01cff..3e12b469dfa8 100644
> --- a/drivers/gpu/drm/bridge/samsung-dsim.c
> +++ b/drivers/gpu/drm/bridge/samsung-dsim.c
> @@ -1290,6 +1290,13 @@ static void samsung_dsim_atomic_pre_enable(struct drm_bridge *bridge,
>         }
>
>         dsi->state |= DSIM_STATE_ENABLED;
> +
> +       if (!(dsi->state & DSIM_STATE_INITIALIZED)) {
> +               ret = samsung_dsim_init(dsi);
> +               if (ret)
> +                       return;
> +               dsi->state |= DSIM_STATE_INITIALIZED;

Out of curiosity, is there a reason that  dsi->state cannot add
DSIM_STATE_INITIALIZED inside the samsung_dsim_init function call?  It
seems to me that if samsung_dsim_init returns successfully, it should
set that flag.  I don't know if it's called from other places or not.

adam
> +       }
>  }
>
>  static void samsung_dsim_atomic_enable(struct drm_bridge *bridge,
> --
> 2.25.1
>