[PATCH v7 4/4] Support the eDP modes given by panel

[Sankeerth Billakanti]

The eDP controller does not have a reliable way keep panel
powered on to read the sink capabilities. So, the controller
driver cannot validate if a mode can be supported by the
source. We will rely on the panel driver to populate only
the supported modes for now.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka at quicinc.com>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index c7277f0..0f18a16 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -998,6 +998,14 @@ enum drm_mode_status dp_bridge_mode_valid(struct drm_bridge *bridge,
 		return -EINVAL;
 	}
 
+	/*
+	 * The eDP controller currently does not have a reliable way of
+	 * enabling panel power to read sink capabilities. So, we rely
+	 * on the panel driver to populate only supported modes for now.
+	 */
+	if (dp->is_edp)
+		return MODE_OK;
+
 	if ((dp->max_pclk_khz <= 0) ||
 			(dp->max_pclk_khz > DP_MAX_PIXEL_CLK_KHZ) ||
 			(mode->clock > dp->max_pclk_khz))
-- 
2.7.4