[PATCH v11 18/24] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi

[Sascha Hauer]

This enabled the VOP2 display controller along with hdmi and the
required port routes which is enough to get a picture out of the
hdmi port of the board.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---

Notes:
    Changes since v5:
    - Drop reg property from single endpoint node
    
    Changes since v4:
    - Sort nodes alphabetically
    
    Changes since v3:
    - Fix HDMI connector type

 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index a794a0ea5c701..096b66d7697e2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -8,6 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3568.dtsi"
 
 / {
@@ -34,6 +35,17 @@ dc_12v: dc-12v {
 		regulator-max-microvolt = <12000000>;
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -189,6 +201,24 @@ &gpu {
 	status = "okay";
 };
 
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -589,3 +619,20 @@ &usb2phy1_otg {
 	phy-supply = <&vcc5v0_usb_host>;
 	status = "okay";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.30.2