[PATCH v9 3/4] drm/msm/dp: wait for hpd high before aux transaction

[Stephen Boyd]

Quoting Sankeerth Billakanti (2022-04-22 02:11:05)
> The source device should ensure the sink is ready before proceeding to
> read the sink capability or perform any aux transactions. The sink
> will indicate its readiness by asserting the HPD line. The controller
> driver needs to wait for the hpd line to be asserted by the sink before
> it performs any aux transactions.
>
> The eDP sink is assumed to be always connected. It needs power from the
> source and its HPD line will be asserted only after the panel is powered
> on. The panel power will be enabled from the panel-edp driver and only
> after that, the hpd line will be asserted.
>
> Whereas for DP, the sink can be hotplugged and unplugged anytime. The hpd
> line gets asserted to indicate the sink is connected and ready. Hence
> there is no need to wait for the hpd line to be asserted for a DP sink.
>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka at quicinc.com>
> Reviewed-by: Douglas Anderson <dianders at chromium.org>
> ---

Reviewed-by: Stephen Boyd <swboyd at chromium.org>