[PATCH v5 10/19] drm/msm/dpu: make changes to dpu_encoder to support virtual encoder
Abhinav Kumar
quic_abhinavk at quicinc.com
Mon Apr 25 00:32:01 UTC 2022
Make changes to dpu_encoder to support virtual encoder needed
to support writeback for dpu.
changes in v4:
- squash dpu_encoder pieces from [1]
[1] https://patchwork.freedesktop.org/patch/483099/?series=102964&rev=2
Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 94 +++++++++++++++++++-----
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 7 ++
2 files changed, 83 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index 25c7eda..d1e92d89 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -1013,9 +1013,18 @@ static void dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc,
if (phys->intf_idx >= INTF_0 && phys->intf_idx < INTF_MAX)
phys->hw_intf = dpu_rm_get_intf(&dpu_kms->rm, phys->intf_idx);
- if (!phys->hw_intf) {
+ if (phys->wb_idx >= WB_0 && phys->wb_idx < WB_MAX)
+ phys->hw_wb = dpu_rm_get_wb(&dpu_kms->rm, phys->wb_idx);
+
+ if (!phys->hw_intf && !phys->hw_wb) {
DPU_ERROR_ENC(dpu_enc,
- "no intf block assigned at idx: %d\n", i);
+ "no intf or wb block assigned at idx: %d\n", i);
+ return;
+ }
+
+ if (phys->hw_intf && phys->hw_wb) {
+ DPU_ERROR_ENC(dpu_enc,
+ "invalid phys both intf and wb block at idx: %d\n", i);
return;
}
@@ -1163,16 +1172,35 @@ static enum dpu_intf dpu_encoder_get_intf(struct dpu_mdss_cfg *catalog,
{
int i = 0;
- for (i = 0; i < catalog->intf_count; i++) {
- if (catalog->intf[i].type == type
- && catalog->intf[i].controller_id == controller_id) {
- return catalog->intf[i].id;
+ if (type != INTF_WB) {
+ for (i = 0; i < catalog->intf_count; i++) {
+ if (catalog->intf[i].type == type
+ && catalog->intf[i].controller_id == controller_id) {
+ return catalog->intf[i].id;
+ }
}
}
return INTF_MAX;
}
+static enum dpu_wb dpu_encoder_get_wb(struct dpu_mdss_cfg *catalog,
+ enum dpu_intf_type type, u32 controller_id)
+{
+ int i = 0;
+
+ if (type != INTF_WB)
+ goto end;
+
+ for (i = 0; i < catalog->wb_count; i++) {
+ if (catalog->wb[i].id == controller_id)
+ return catalog->wb[i].id;
+ }
+
+end:
+ return WB_MAX;
+}
+
static void dpu_encoder_vblank_callback(struct drm_encoder *drm_enc,
struct dpu_encoder_phys *phy_enc)
{
@@ -1887,16 +1915,32 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
dpu_encoder_helper_reset_mixers(phys_enc);
- for (i = 0; i < dpu_enc->num_phys_encs; i++) {
- if (dpu_enc->phys_encs[i] && phys_enc->hw_intf->ops.bind_pingpong_blk)
- phys_enc->hw_intf->ops.bind_pingpong_blk(
- dpu_enc->phys_encs[i]->hw_intf, false,
- dpu_enc->phys_encs[i]->hw_pp->idx);
-
- /* mark INTF flush as pending */
- if (phys_enc->hw_ctl->ops.update_pending_flush_intf)
- phys_enc->hw_ctl->ops.update_pending_flush_intf(phys_enc->hw_ctl,
- dpu_enc->phys_encs[i]->hw_intf->idx);
+ /*
+ * TODO: move the once-only operation like CTL flush/trigger
+ * into dpu_encoder_virt_disable() and all operations which need
+ * to be done per phys encoder into the phys_disable() op.
+ */
+ if (phys_enc->hw_wb) {
+ /* disable the PP block */
+ if (phys_enc->hw_wb->ops.bind_pingpong_blk)
+ phys_enc->hw_wb->ops.bind_pingpong_blk(phys_enc->hw_wb, false,
+ phys_enc->hw_pp->idx);
+
+ /* mark WB flush as pending */
+ if (phys_enc->hw_ctl->ops.update_pending_flush_wb)
+ phys_enc->hw_ctl->ops.update_pending_flush_wb(ctl, phys_enc->hw_wb->idx);
+ } else {
+ for (i = 0; i < dpu_enc->num_phys_encs; i++) {
+ if (dpu_enc->phys_encs[i] && phys_enc->hw_intf->ops.bind_pingpong_blk)
+ phys_enc->hw_intf->ops.bind_pingpong_blk(
+ dpu_enc->phys_encs[i]->hw_intf, false,
+ dpu_enc->phys_encs[i]->hw_pp->idx);
+
+ /* mark INTF flush as pending */
+ if (phys_enc->hw_ctl->ops.update_pending_flush_intf)
+ phys_enc->hw_ctl->ops.update_pending_flush_intf(phys_enc->hw_ctl,
+ dpu_enc->phys_encs[i]->hw_intf->idx);
+ }
}
/* reset the merge 3D HW block */
@@ -2112,6 +2156,9 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
case DRM_MODE_ENCODER_TMDS:
intf_type = INTF_DP;
break;
+ case DRM_MODE_ENCODER_VIRTUAL:
+ intf_type = INTF_WB;
+ break;
}
WARN_ON(disp_info->num_of_h_tiles < 1);
@@ -2149,8 +2196,19 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
phys_params.intf_idx = dpu_encoder_get_intf(dpu_kms->catalog,
intf_type,
controller_id);
- if (phys_params.intf_idx == INTF_MAX) {
- DPU_ERROR_ENC(dpu_enc, "could not get intf: type %d, id %d\n",
+
+ phys_params.wb_idx = dpu_encoder_get_wb(dpu_kms->catalog,
+ intf_type, controller_id);
+ /*
+ * For boards which have no physical displays, having no interface
+ * is fine because it can still be used with just writeback.
+ * If we try without a display on a board which uses a DPU in which
+ * writeback is not supported, then this will still fail as it will not
+ * find any writeback in the catalog.
+ */
+ if ((phys_params.intf_idx == INTF_MAX) &&
+ (phys_params.wb_idx == WB_MAX)) {
+ DPU_ERROR_ENC(dpu_enc, "could not get intf or wb: type %d, id %d\n",
intf_type, controller_id);
ret = -EINVAL;
}
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
index 544a9a4..c84b8e8 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
@@ -11,6 +11,7 @@
#include "dpu_kms.h"
#include "dpu_hw_intf.h"
+#include "dpu_hw_wb.h"
#include "dpu_hw_pingpong.h"
#include "dpu_hw_ctl.h"
#include "dpu_hw_top.h"
@@ -165,12 +166,14 @@ enum dpu_intr_idx {
* @hw_ctl: Hardware interface to the ctl registers
* @hw_pp: Hardware interface to the ping pong registers
* @hw_intf: Hardware interface to the intf registers
+ * @hw_wb: Hardware interface to the wb registers
* @dpu_kms: Pointer to the dpu_kms top level
* @cached_mode: DRM mode cached at mode_set time, acted on in enable
* @enabled: Whether the encoder has enabled and running a mode
* @split_role: Role to play in a split-panel configuration
* @intf_mode: Interface mode
* @intf_idx: Interface index on dpu hardware
+ * @wb_idx: Writeback index on dpu hardware
* @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes
* @enable_state: Enable state tracking
* @vblank_refcount: Reference count of vblank request
@@ -193,11 +196,13 @@ struct dpu_encoder_phys {
struct dpu_hw_ctl *hw_ctl;
struct dpu_hw_pingpong *hw_pp;
struct dpu_hw_intf *hw_intf;
+ struct dpu_hw_wb *hw_wb;
struct dpu_kms *dpu_kms;
struct drm_display_mode cached_mode;
enum dpu_enc_split_role split_role;
enum dpu_intf_mode intf_mode;
enum dpu_intf intf_idx;
+ enum dpu_wb wb_idx;
spinlock_t *enc_spinlock;
enum dpu_enc_enable_state enable_state;
atomic_t vblank_refcount;
@@ -243,6 +248,7 @@ struct dpu_encoder_phys_cmd {
* @parent_ops: Callbacks exposed by the parent to the phys_enc
* @split_role: Role to play in a split-panel configuration
* @intf_idx: Interface index this phys_enc will control
+ * @wb_idx: Writeback index this phys_enc will control
* @enc_spinlock: Virtual-Encoder-Wide Spin Lock for IRQ purposes
*/
struct dpu_enc_phys_init_params {
@@ -251,6 +257,7 @@ struct dpu_enc_phys_init_params {
const struct dpu_encoder_virt_ops *parent_ops;
enum dpu_enc_split_role split_role;
enum dpu_intf intf_idx;
+ enum dpu_wb wb_idx;
spinlock_t *enc_spinlock;
};
--
2.7.4
More information about the dri-devel
mailing list