[Freedreno] [PATCH v4 03/20] drm: allow real encoder to be passed for drm_writeback_connector

Laurent Pinchart laurent.pinchart at ideasonboard.com
Mon Apr 25 17:32:49 UTC 2022


On Mon, Apr 25, 2022 at 01:50:43PM +0300, Dmitry Baryshkov wrote:
> On Sun, 24 Apr 2022 at 22:59, Laurent Pinchart wrote:
> > On Sun, Apr 24, 2022 at 11:23:20AM -0700, Abhinav Kumar wrote:
> > > On 4/24/2022 11:12 AM, Abhinav Kumar wrote:
> > > > On 4/24/2022 7:50 AM, Laurent Pinchart wrote:
> > > >> On Fri, Apr 22, 2022 at 04:06:38PM -0700, Abhinav Kumar wrote:
> > > >>> For some vendor driver implementations, display hardware can
> > > >>> be shared between the encoder used for writeback and the physical
> > > >>> display.
> > > >>>
> > > >>> In addition resources such as clocks and interrupts can
> > > >>> also be shared between writeback and the real encoder.
> > > >>>
> > > >>> To accommodate such vendor drivers and hardware, allow
> > > >>> real encoder to be passed for drm_writeback_connector.
> > > >>>
> > > >>> For existing clients, drm_writeback_connector_init() will use
> > > >>> an internal_encoder under the hood and hence no changes will
> > > >>> be needed.
> > > >>>
> > > >>> changes in v7:
> > > >>>     - move this change before the vc4 change in the series
> > > >>>       to minimize the changes to vendor drivers in drm core
> > > >>>       changes
> > > >>
> > > >> Why is this needed ? The drm_writeback_connector functions don't need
> > > >> the drm_encoder after drm_writeback_connector_init() (or
> > > >> drm_writeback_connector_init_with_encoder()) returns.
> > > >>
> > > >
> > > > Sorry I didnt follow this comment. This change log is incorrect, so
> > > > after changing the previous change in the series and modifying this, no
> > > > further changes are needed to vc4, so I decided to drop the next change.
> > > > So this change log is incorrect. I can remove this.
> > > >
> > > > Is that what you meant?
> > >
> > > So till the previous change, the only user of
> > > drm_writeback_connector_init_with_encoder() was
> > > drm_writeback_connector_init() which was still passing its own
> > > internal_encoder.
> > >
> > > Only if the wb_connector->encoder is changed to a pointer, other vendor
> > > drivers can pass their own encoder to
> > > drm_writeback_connector_init_with_encoder().
> > >
> > > Hence you are right that drm_writeback_connector functions do not need
> > > drm_encoder after init() returns, but till this change is done, other
> > > vendor drivers cannot directly call
> > > drm_writeback_connector_init_with_encoder() because the encoder will not
> > > be valid till then.
> >
> > Users of drm_writeback_connector_init_with_encoder() handle the encoder
> > themselves, they can simply ignore drm_writeback_connector.encoder. The
> > documentation of the encoder field needs to be updated though (I'd do so
> > in the previous patch), to clearly mention that the field is valid only
> > when using drm_writeback_connector_init(), not when calling
> > drm_writeback_connector_init_with_encoder().
> 
> If we allow it to be unitialized, it might end with hard-to-trace
> bugs, additional conditions, etc.
> In my opnion we should:
>  - either make drm_writeback_connector.encoder a valid pointer
>  - or drop the field completely.
> 
> And up to some point I'd vote for the second option. The code using
> internal_encoder can continue using it directly. The code using
> drm_writeback_connector_init_with_encoder() will manage encoder on
> their own. We will loose a single entry point for wb's encoder, but do
> we really need it? (Frankly speaking I didn't check.)

As far as I understand, we went for the second option as Abhinav dropped
this patch for the next version.

> > > Hope this clarifies it.
> > >
> > > >>> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> > > >>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > > >>> ---
> > > >>>   drivers/gpu/drm/drm_writeback.c | 18 ++++++++++++------
> > > >>>   drivers/gpu/drm/vc4/vc4_txp.c   |  4 ++--
> > > >>>   include/drm/drm_writeback.h     | 22 ++++++++++++++++++++--
> > > >>>   3 files changed, 34 insertions(+), 10 deletions(-)
> > > >>>
> > > >>> diff --git a/drivers/gpu/drm/drm_writeback.c
> > > >>> b/drivers/gpu/drm/drm_writeback.c
> > > >>> index 92658ad..0538674 100644
> > > >>> --- a/drivers/gpu/drm/drm_writeback.c
> > > >>> +++ b/drivers/gpu/drm/drm_writeback.c
> > > >>> @@ -180,21 +180,21 @@ int drm_writeback_connector_init(struct
> > > >>> drm_device *dev,
> > > >>>   {
> > > >>>       int ret = 0;
> > > >>> -    drm_encoder_helper_add(&wb_connector->encoder, enc_helper_funcs);
> > > >>> +    drm_encoder_helper_add(&wb_connector->internal_encoder, enc_helper_funcs);
> > > >>> -    wb_connector->encoder.possible_crtcs = possible_crtcs;
> > > >>> +    wb_connector->internal_encoder.possible_crtcs = possible_crtcs;
> > > >>> -    ret = drm_encoder_init(dev, &wb_connector->encoder,
> > > >>> +    ret = drm_encoder_init(dev, &wb_connector->internal_encoder,
> > > >>>                      &drm_writeback_encoder_funcs,
> > > >>>                      DRM_MODE_ENCODER_VIRTUAL, NULL);
> > > >>>       if (ret)
> > > >>>           return ret;
> > > >>> -    ret = drm_writeback_connector_init_with_encoder(dev, wb_connector, &wb_connector->encoder,
> > > >>> -            con_funcs, formats, n_formats);
> > > >>> +    ret = drm_writeback_connector_init_with_encoder(dev, wb_connector,
> > > >>> +            &wb_connector->internal_encoder, con_funcs, formats, n_formats);
> > > >>>       if (ret)
> > > >>> -        drm_encoder_cleanup(&wb_connector->encoder);
> > > >>> +        drm_encoder_cleanup(&wb_connector->internal_encoder);
> > > >>>       return ret;
> > > >>>   }
> > > >>> @@ -239,6 +239,12 @@ int drm_writeback_connector_init_with_encoder(struct drm_device *dev,
> > > >>>       struct drm_mode_config *config = &dev->mode_config;
> > > >>>       int ret = create_writeback_properties(dev);
> > > >>> +    /*
> > > >>> +     * Assign the encoder passed to this API to the wb_connector's encoder.
> > > >>> +     * For drm_writeback_connector_init(), this shall be the internal_encoder
> > > >>> +     */
> > > >>> +    wb_connector->encoder = enc;
> > > >>> +
> > > >>>       if (ret != 0)
> > > >>>           return ret;
> > > >>> diff --git a/drivers/gpu/drm/vc4/vc4_txp.c b/drivers/gpu/drm/vc4/vc4_txp.c
> > > >>> index 3447eb6..7e063a9 100644
> > > >>> --- a/drivers/gpu/drm/vc4/vc4_txp.c
> > > >>> +++ b/drivers/gpu/drm/vc4/vc4_txp.c
> > > >>> @@ -159,7 +159,7 @@ struct vc4_txp {
> > > >>>   static inline struct vc4_txp *encoder_to_vc4_txp(struct drm_encoder *encoder)
> > > >>>   {
> > > >>> -    return container_of(encoder, struct vc4_txp, connector.encoder);
> > > >>> +    return container_of(encoder, struct vc4_txp, connector.internal_encoder);
> > > >>>   }
> > > >>>   static inline struct vc4_txp *connector_to_vc4_txp(struct  drm_connector *conn)
> > > >>> @@ -507,7 +507,7 @@ static int vc4_txp_bind(struct device *dev, struct device *master, void *data)
> > > >>>       if (ret)
> > > >>>           return ret;
> > > >>> -    encoder = &txp->connector.encoder;
> > > >>> +    encoder = txp->connector.encoder;
> > > >>>       encoder->possible_crtcs = drm_crtc_mask(crtc);
> > > >>>       ret = devm_request_irq(dev, irq, vc4_txp_interrupt, 0,
> > > >>> diff --git a/include/drm/drm_writeback.h b/include/drm/drm_writeback.h
> > > >>> index bb306fa..3fbae9d 100644
> > > >>> --- a/include/drm/drm_writeback.h
> > > >>> +++ b/include/drm/drm_writeback.h
> > > >>> @@ -25,13 +25,31 @@ struct drm_writeback_connector {
> > > >>>       struct drm_connector base;
> > > >>>       /**
> > > >>> -     * @encoder: Internal encoder used by the connector to fulfill
> > > >>> +     * @encoder: handle to drm_encoder used by the connector to fulfill
> > > >>>        * the DRM framework requirements. The users of the
> > > >>>        * @drm_writeback_connector control the behaviour of the @encoder
> > > >>>        * by passing the @enc_funcs parameter to drm_writeback_connector_init()
> > > >>>        * function.
> > > >>> +     *
> > > >>> +     * For some vendor drivers, the hardware resources are shared between
> > > >>> +     * writeback encoder and rest of the display pipeline.
> > > >>> +     * To accommodate such cases, encoder is a handle to the real encoder
> > > >>> +     * hardware.
> > > >>> +     *
> > > >>> +     * For current existing writeback users, this shall continue to be the
> > > >>> +     * embedded encoder for the writeback connector.
> > > >>> +     */
> > > >>> +    struct drm_encoder *encoder;
> > > >>> +
> > > >>> +    /**
> > > >>> +     * @internal_encoder: internal encoder used by writeback when
> > > >>> +     * drm_writeback_connector_init() is used.
> > > >>> +     * @encoder will be assigned to this for those cases
> > > >>> +     *
> > > >>> +     * This will be unused when drm_writeback_connector_init_with_encoder()
> > > >>> +     * is used.
> > > >>>        */
> > > >>> -    struct drm_encoder encoder;
> > > >>> +    struct drm_encoder internal_encoder;
> > > >>>       /**
> > > >>>        * @pixel_formats_blob_ptr:

-- 
Regards,

Laurent Pinchart


More information about the dri-devel mailing list