[PATCH v5 15/19] drm/msm/dpu: initialize dpu encoder and connector for writeback
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Tue Apr 26 00:32:49 UTC 2022
Hi Abhinav,
On Sun, Apr 24, 2022 at 05:32:06PM -0700, Abhinav Kumar wrote:
> Initialize dpu encoder and connector for writeback if the
> target supports it in the catalog.
>
> changes in v2:
> - start initialing the encoder for writeback since we
> have migrated to using drm_writeback_connector_init_with_encoder()
> - instead of checking for WB_2 inside _dpu_kms_initialize_writeback
> call it only when its WB_2
> - rebase on tip of msm-next and remove usage of priv->encoders
>
> changes in v3:
> - none
>
> changes in v4:
> - fix copyright years order
>
> Signed-off-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 27 +++++++++----
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 61 ++++++++++++++++++++++++++++-
> 2 files changed, 80 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 24870eb..2d79002 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -2102,7 +2102,7 @@ static void dpu_encoder_early_unregister(struct drm_encoder *encoder)
> }
>
> static int dpu_encoder_virt_add_phys_encs(
> - u32 display_caps,
> + struct msm_display_info *disp_info,
> struct dpu_encoder_virt *dpu_enc,
> struct dpu_enc_phys_init_params *params)
> {
> @@ -2121,7 +2121,7 @@ static int dpu_encoder_virt_add_phys_encs(
> return -EINVAL;
> }
>
> - if (display_caps & MSM_DISPLAY_CAP_VID_MODE) {
> + if (disp_info->capabilities & MSM_DISPLAY_CAP_VID_MODE) {
> enc = dpu_encoder_phys_vid_init(params);
>
> if (IS_ERR_OR_NULL(enc)) {
> @@ -2134,7 +2134,7 @@ static int dpu_encoder_virt_add_phys_encs(
> ++dpu_enc->num_phys_encs;
> }
>
> - if (display_caps & MSM_DISPLAY_CAP_CMD_MODE) {
> + if (disp_info->capabilities & MSM_DISPLAY_CAP_CMD_MODE) {
> enc = dpu_encoder_phys_cmd_init(params);
>
> if (IS_ERR_OR_NULL(enc)) {
> @@ -2147,6 +2147,19 @@ static int dpu_encoder_virt_add_phys_encs(
> ++dpu_enc->num_phys_encs;
> }
>
> + if (disp_info->intf_type == DRM_MODE_ENCODER_VIRTUAL) {
> + enc = dpu_encoder_phys_wb_init(params);
> +
> + if (IS_ERR_OR_NULL(enc)) {
> + DPU_ERROR_ENC(dpu_enc, "failed to init wb enc: %ld\n",
> + PTR_ERR(enc));
> + return enc == NULL ? -EINVAL : PTR_ERR(enc);
> + }
> +
> + dpu_enc->phys_encs[dpu_enc->num_phys_encs] = enc;
> + ++dpu_enc->num_phys_encs;
> + }
> +
> if (params->split_role == ENC_ROLE_SLAVE)
> dpu_enc->cur_slave = enc;
> else
> @@ -2248,9 +2261,8 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc,
> }
>
> if (!ret) {
> - ret = dpu_encoder_virt_add_phys_encs(disp_info->capabilities,
> - dpu_enc,
> - &phys_params);
> + ret = dpu_encoder_virt_add_phys_encs(disp_info,
> + dpu_enc, &phys_params);
> if (ret)
> DPU_ERROR_ENC(dpu_enc, "failed to add phys encs\n");
> }
> @@ -2367,8 +2379,9 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev,
> if (!dpu_enc)
> return ERR_PTR(-ENOMEM);
>
> +
> rc = drm_encoder_init(dev, &dpu_enc->base, &dpu_encoder_funcs,
> - drm_enc_mode, NULL);
> + drm_enc_mode, NULL);
> if (rc) {
> devm_kfree(dev->dev, dpu_enc);
> return ERR_PTR(rc);
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index c683cab..9a406e1 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1,7 +1,9 @@
> // SPDX-License-Identifier: GPL-2.0-only
> /*
> - * Copyright (c) 2014-2018, The Linux Foundation. All rights reserved.
> * Copyright (C) 2013 Red Hat
> + * Copyright (c) 2014-2018, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + *
> * Author: Rob Clark <robdclark at gmail.com>
> */
>
> @@ -15,6 +17,7 @@
> #include <drm/drm_crtc.h>
> #include <drm/drm_file.h>
> #include <drm/drm_vblank.h>
> +#include <drm/drm_writeback.h>
>
> #include "msm_drv.h"
> #include "msm_mmu.h"
> @@ -29,6 +32,7 @@
> #include "dpu_kms.h"
> #include "dpu_plane.h"
> #include "dpu_vbif.h"
> +#include "dpu_writeback.h"
>
> #define CREATE_TRACE_POINTS
> #include "dpu_trace.h"
> @@ -648,6 +652,45 @@ static int _dpu_kms_initialize_displayport(struct drm_device *dev,
> return 0;
> }
>
> +static int _dpu_kms_initialize_writeback(struct drm_device *dev,
> + struct msm_drm_private *priv, struct dpu_kms *dpu_kms,
> + const u32 *wb_formats, int n_formats)
> +{
> + struct drm_encoder *encoder = NULL;
> + struct msm_display_info info;
> + int rc;
> +
> + encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_VIRTUAL);
I'm puzzled. I thought the whole purpose of the
drm_writeback_connector_init_with_encoder() function was to share an
encoder between writeback and a real display output, but the encoder you
create here seems to be specific to writeback. What am I missing ?
> + if (IS_ERR(encoder)) {
> + DPU_ERROR("encoder init failed for dsi display\n");
> + return PTR_ERR(encoder);
> + }
> +
> + memset(&info, 0, sizeof(info));
> +
> + rc = dpu_writeback_init(dev, encoder, wb_formats,
> + n_formats);
> + if (rc) {
> + DPU_ERROR("dpu_writeback_init, rc = %d\n", rc);
> + drm_encoder_cleanup(encoder);
> + return rc;
> + }
> +
> + info.num_of_h_tiles = 1;
> + /* use only WB idx 2 instance for DPU */
> + info.h_tile_instance[0] = WB_2;
> + info.intf_type = encoder->encoder_type;
> +
> + rc = dpu_encoder_setup(dev, encoder, &info);
> + if (rc) {
> + DPU_ERROR("failed to setup DPU encoder %d: rc:%d\n",
> + encoder->base.id, rc);
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> /**
> * _dpu_kms_setup_displays - create encoders, bridges and connectors
> * for underlying displays
> @@ -661,6 +704,7 @@ static int _dpu_kms_setup_displays(struct drm_device *dev,
> struct dpu_kms *dpu_kms)
> {
> int rc = 0;
> + int i;
>
> rc = _dpu_kms_initialize_dsi(dev, priv, dpu_kms);
> if (rc) {
> @@ -674,6 +718,21 @@ static int _dpu_kms_setup_displays(struct drm_device *dev,
> return rc;
> }
>
> + /* Since WB isn't a driver check the catalog before initializing */
> + if (dpu_kms->catalog->wb_count) {
> + for (i = 0; i < dpu_kms->catalog->wb_count; i++) {
> + if (dpu_kms->catalog->wb[i].id == WB_2) {
> + rc = _dpu_kms_initialize_writeback(dev, priv, dpu_kms,
> + dpu_kms->catalog->wb[i].format_list,
> + dpu_kms->catalog->wb[i].num_formats);
> + if (rc) {
> + DPU_ERROR("initialize_WB failed, rc = %d\n", rc);
> + return rc;
> + }
> + }
> + }
> + }
> +
> return rc;
> }
>
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list