[PATCH 21/41] ARM: omap1: dma: remove omap2 specific bits
Péter Ujfalusi
peter.ujfalusi at gmail.com
Fri Apr 29 19:26:02 UTC 2022
On 4/19/22 16:37, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd at arndb.de>
>
> No part of plat-omap/dma.c is called on omap2 any more, so
> anything omap2 specific in here can simply be removed.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi at gmail.com>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> ---
> arch/arm/plat-omap/dma.c | 217 ++++++++++-----------------------------
> 1 file changed, 55 insertions(+), 162 deletions(-)
>
> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
> index b7757864d0aa..eb14528f133c 100644
> --- a/arch/arm/plat-omap/dma.c
> +++ b/arch/arm/plat-omap/dma.c
> @@ -34,11 +34,9 @@
>
> #include <linux/omap-dma.h>
>
> -#ifdef CONFIG_ARCH_OMAP1
> #include <mach/hardware.h>
> #include <linux/soc/ti/omap1-io.h>
> #include <linux/soc/ti/omap1-soc.h>
> -#endif
>
> /*
> * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
> @@ -51,16 +49,7 @@
>
> #undef DEBUG
>
> -#ifndef CONFIG_ARCH_OMAP1
> -enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
> - DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
> -};
> -
> -enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
> -#endif
> -
> #define OMAP_DMA_ACTIVE 0x01
> -#define OMAP2_DMA_CSR_CLEAR_MASK 0xffffffff
>
> #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
>
> @@ -94,13 +83,9 @@ static inline void omap_disable_channel_irq(int lch)
> /* disable channel interrupts */
> p->dma_write(0, CICR, lch);
> /* Clear CSR */
> - if (dma_omap1())
> - p->dma_read(CSR, lch);
> - else
> - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
> + p->dma_read(CSR, lch);
> }
>
> -#ifdef CONFIG_ARCH_OMAP1
> static inline void set_gdma_dev(int req, int dev)
> {
> u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
> @@ -112,11 +97,6 @@ static inline void set_gdma_dev(int req, int dev)
> l |= (dev - 1) << shift;
> omap_writel(l, reg);
> }
> -#else
> -#define set_gdma_dev(req, dev) do {} while (0)
> -#define omap_readl(reg) 0
> -#define omap_writel(val, reg) do {} while (0)
> -#endif
>
> #ifdef CONFIG_ARCH_OMAP1
> void omap_set_dma_priority(int lch, int dst_port, int priority)
> @@ -181,59 +161,24 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
> int dma_trigger, int src_or_dst_synch)
> {
> u32 l;
> + u16 ccr;
>
> l = p->dma_read(CSDP, lch);
> l &= ~0x03;
> l |= data_type;
> p->dma_write(l, CSDP, lch);
>
> - if (dma_omap1()) {
> - u16 ccr;
> -
> - ccr = p->dma_read(CCR, lch);
> - ccr &= ~(1 << 5);
> - if (sync_mode == OMAP_DMA_SYNC_FRAME)
> - ccr |= 1 << 5;
> - p->dma_write(ccr, CCR, lch);
> -
> - ccr = p->dma_read(CCR2, lch);
> - ccr &= ~(1 << 2);
> - if (sync_mode == OMAP_DMA_SYNC_BLOCK)
> - ccr |= 1 << 2;
> - p->dma_write(ccr, CCR2, lch);
> - }
> -
> - if (dma_omap2plus() && dma_trigger) {
> - u32 val;
> -
> - val = p->dma_read(CCR, lch);
> -
> - /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
> - val &= ~((1 << 23) | (3 << 19) | 0x1f);
> - val |= (dma_trigger & ~0x1f) << 14;
> - val |= dma_trigger & 0x1f;
> -
> - if (sync_mode & OMAP_DMA_SYNC_FRAME)
> - val |= 1 << 5;
> - else
> - val &= ~(1 << 5);
> -
> - if (sync_mode & OMAP_DMA_SYNC_BLOCK)
> - val |= 1 << 18;
> - else
> - val &= ~(1 << 18);
> -
> - if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) {
> - val &= ~(1 << 24); /* dest synch */
> - val |= (1 << 23); /* Prefetch */
> - } else if (src_or_dst_synch) {
> - val |= 1 << 24; /* source synch */
> - } else {
> - val &= ~(1 << 24); /* dest synch */
> - }
> - p->dma_write(val, CCR, lch);
> - }
> + ccr = p->dma_read(CCR, lch);
> + ccr &= ~(1 << 5);
> + if (sync_mode == OMAP_DMA_SYNC_FRAME)
> + ccr |= 1 << 5;
> + p->dma_write(ccr, CCR, lch);
>
> + ccr = p->dma_read(CCR2, lch);
> + ccr &= ~(1 << 2);
> + if (sync_mode == OMAP_DMA_SYNC_BLOCK)
> + ccr |= 1 << 2;
> + p->dma_write(ccr, CCR2, lch);
> p->dma_write(elem_count, CEN, lch);
> p->dma_write(frame_count, CFN, lch);
> }
> @@ -241,7 +186,7 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params);
>
> void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
> {
> - if (dma_omap1() && !dma_omap15xx()) {
> + if (!dma_omap15xx()) {
> u32 l;
>
> l = p->dma_read(LCH_CTRL, lch);
> @@ -258,15 +203,12 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode,
> int src_ei, int src_fi)
> {
> u32 l;
> + u16 w;
>
> - if (dma_omap1()) {
> - u16 w;
> -
> - w = p->dma_read(CSDP, lch);
> - w &= ~(0x1f << 2);
> - w |= src_port << 2;
> - p->dma_write(w, CSDP, lch);
> - }
> + w = p->dma_read(CSDP, lch);
> + w &= ~(0x1f << 2);
> + w |= src_port << 2;
> + p->dma_write(w, CSDP, lch);
>
> l = p->dma_read(CCR, lch);
> l &= ~(0x03 << 12);
> @@ -304,26 +246,15 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
> case OMAP_DMA_DATA_BURST_DIS:
> break;
> case OMAP_DMA_DATA_BURST_4:
> - if (dma_omap2plus())
> - burst = 0x1;
> - else
> - burst = 0x2;
> + burst = 0x2;
> break;
> case OMAP_DMA_DATA_BURST_8:
> - if (dma_omap2plus()) {
> - burst = 0x2;
> - break;
> - }
> /*
> * not supported by current hardware on OMAP1
> * w |= (0x03 << 7);
> */
> fallthrough;
> case OMAP_DMA_DATA_BURST_16:
> - if (dma_omap2plus()) {
> - burst = 0x3;
> - break;
> - }
> /* OMAP1 don't support burst 16 */
> fallthrough;
> default:
> @@ -342,12 +273,10 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
> {
> u32 l;
>
> - if (dma_omap1()) {
> - l = p->dma_read(CSDP, lch);
> - l &= ~(0x1f << 9);
> - l |= dest_port << 9;
> - p->dma_write(l, CSDP, lch);
> - }
> + l = p->dma_read(CSDP, lch);
> + l &= ~(0x1f << 9);
> + l |= dest_port << 9;
> + p->dma_write(l, CSDP, lch);
>
> l = p->dma_read(CCR, lch);
> l &= ~(0x03 << 14);
> @@ -385,22 +314,12 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
> case OMAP_DMA_DATA_BURST_DIS:
> break;
> case OMAP_DMA_DATA_BURST_4:
> - if (dma_omap2plus())
> - burst = 0x1;
> - else
> - burst = 0x2;
> + burst = 0x2;
> break;
> case OMAP_DMA_DATA_BURST_8:
> - if (dma_omap2plus())
> - burst = 0x2;
> - else
> - burst = 0x3;
> + burst = 0x3;
> break;
> case OMAP_DMA_DATA_BURST_16:
> - if (dma_omap2plus()) {
> - burst = 0x3;
> - break;
> - }
> /* OMAP1 don't support burst 16 */
> fallthrough;
> default:
> @@ -416,10 +335,7 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
> static inline void omap_enable_channel_irq(int lch)
> {
> /* Clear CSR */
> - if (dma_omap1())
> - p->dma_read(CSR, lch);
> - else
> - p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
> + p->dma_read(CSR, lch);
>
> /* Enable some nice interrupts. */
> p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
> @@ -437,8 +353,7 @@ static inline void enable_lnk(int lch)
>
> l = p->dma_read(CLNK_CTRL, lch);
>
> - if (dma_omap1())
> - l &= ~(1 << 14);
> + l &= ~(1 << 14);
>
> /* Set the ENABLE_LNK bits */
> if (dma_chan[lch].next_lch != -1)
> @@ -456,15 +371,8 @@ static inline void disable_lnk(int lch)
> /* Disable interrupts */
> omap_disable_channel_irq(lch);
>
> - if (dma_omap1()) {
> - /* Set the STOP_LNK bit */
> - l |= 1 << 14;
> - }
> -
> - if (dma_omap2plus()) {
> - /* Clear the ENABLE_LNK bit */
> - l &= ~(1 << 15);
> - }
> + /* Set the STOP_LNK bit */
> + l |= 1 << 14;
>
> p->dma_write(l, CLNK_CTRL, lch);
> dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
> @@ -508,8 +416,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
>
> chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
>
> - if (dma_omap1())
> - chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
> + chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
>
> if (dma_omap16xx()) {
> /* If the sync device is set, configure it dynamically. */
> @@ -522,7 +429,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
> * id.
> */
> p->dma_write(dev_id | (1 << 10), CCR, free_ch);
> - } else if (dma_omap1()) {
> + } else {
> p->dma_write(dev_id, CCR, free_ch);
> }
>
> @@ -739,8 +646,7 @@ dma_addr_t omap_get_dma_src_pos(int lch)
> offset = p->dma_read(CSSA, lch);
> }
>
> - if (dma_omap1())
> - offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
> + offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
>
> return offset;
> }
> @@ -778,8 +684,7 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
> offset = p->dma_read(CDSA, lch);
> }
>
> - if (dma_omap1())
> - offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
> + offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
>
> return offset;
> }
> @@ -796,9 +701,8 @@ int omap_dma_running(void)
> {
> int lch;
>
> - if (dma_omap1())
> - if (omap_lcd_dma_running())
> - return 1;
> + if (omap_lcd_dma_running())
> + return 1;
>
> for (lch = 0; lch < dma_chan_count; lch++)
> if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
> @@ -809,8 +713,6 @@ int omap_dma_running(void)
>
> /*----------------------------------------------------------------------------*/
>
> -#ifdef CONFIG_ARCH_OMAP1
> -
> static int omap1_dma_handle_ch(int ch)
> {
> u32 csr;
> @@ -863,10 +765,6 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
> return handled ? IRQ_HANDLED : IRQ_NONE;
> }
>
> -#else
> -#define omap1_dma_irq_handler NULL
> -#endif
> -
> struct omap_system_dma_plat_info *omap_get_plat_info(void)
> {
> return p;
> @@ -912,29 +810,27 @@ static int omap_system_dma_probe(struct platform_device *pdev)
> if (ch >= 6 && enable_1510_mode)
> continue;
>
> - if (dma_omap1()) {
> - /*
> - * request_irq() doesn't like dev_id (ie. ch) being
> - * zero, so we have to kludge around this.
> - */
> - sprintf(&irq_name[0], "%d", ch);
> - dma_irq = platform_get_irq_byname(pdev, irq_name);
> -
> - if (dma_irq < 0) {
> - ret = dma_irq;
> - goto exit_dma_irq_fail;
> - }
> -
> - /* INT_DMA_LCD is handled in lcd_dma.c */
> - if (dma_irq == INT_DMA_LCD)
> - continue;
> -
> - ret = request_irq(dma_irq,
> - omap1_dma_irq_handler, 0, "DMA",
> - (void *) (ch + 1));
> - if (ret != 0)
> - goto exit_dma_irq_fail;
> + /*
> + * request_irq() doesn't like dev_id (ie. ch) being
> + * zero, so we have to kludge around this.
> + */
> + sprintf(&irq_name[0], "%d", ch);
> + dma_irq = platform_get_irq_byname(pdev, irq_name);
> +
> + if (dma_irq < 0) {
> + ret = dma_irq;
> + goto exit_dma_irq_fail;
> }
> +
> + /* INT_DMA_LCD is handled in lcd_dma.c */
> + if (dma_irq == INT_DMA_LCD)
> + continue;
> +
> + ret = request_irq(dma_irq,
> + omap1_dma_irq_handler, 0, "DMA",
> + (void *) (ch + 1));
> + if (ret != 0)
> + goto exit_dma_irq_fail;
> }
>
> /* reserve dma channels 0 and 1 in high security devices on 34xx */
> @@ -954,9 +850,6 @@ static int omap_system_dma_remove(struct platform_device *pdev)
> {
> int dma_irq, irq_rel = 0;
>
> - if (dma_omap2plus())
> - return 0;
> -
> for ( ; irq_rel < dma_chan_count; irq_rel++) {
> dma_irq = platform_get_irq(pdev, irq_rel);
> free_irq(dma_irq, (void *)(irq_rel + 1));
--
Péter
More information about the dri-devel
mailing list