[Freedreno] [PATCH v2] drm/msm/dsi: use RMW cycles in dsi_update_dsc_timing

Abhinav Kumar quic_abhinavk at quicinc.com
Sat Apr 30 19:25:57 UTC 2022



On 4/30/2022 11:58 AM, Marijn Suijten wrote:
> On 2022-04-30 20:55:33, Dmitry Baryshkov wrote:
>> The downstream uses read-modify-write for updating command mode
>> compression registers. Let's follow this approach. This also fixes the
>> following warning:
>>
>> drivers/gpu/drm/msm/dsi/dsi_host.c:918:23: warning: variable 'reg_ctrl' set but not used [-Wunused-but-set-variable]
>>
>> Reported-by: kernel test robot <lkp at intel.com>
>> Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration")
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> 
> I pointed this out in review multiple times, so you'll obviously get my:
> 
> Reviewed-by: Marijn Suijten <marijn.suijten at somainline.org>
> 
> (But are you sure there's nothing else to clear in the 1st CTRL
> register, only the lowest 16 bits?  That should mean `reg` never
> contains anything in 0xffff0000)

The top 16 bits contain information for stream 1.

Stream 1 is unused. And whatever is the reset value we should retain that.

So this patch is correct.

> 
> However, this seems to indicate that the DSC patch series has been
> approved and merged somehow??
> 
>> ---
>>
>> Changes since v1:
>>   - Fix c&p error and apply mask clear to reg_ctrl2 instead of reg_ctrl
>>     (Abhinav)
>>
>> ---
>>   drivers/gpu/drm/msm/dsi/dsi_host.c | 5 ++++-
>>   1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> index c983698d1384..a95d5df52653 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> @@ -961,10 +961,13 @@ static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mod
>>   		reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
>>   		reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
>>   
>> +		reg_ctrl &= ~0xffff;
>>   		reg_ctrl |= reg;
>> +
>> +		reg_ctrl2 &= ~DSI_COMMAND_COMPRESSION_MODE_CTRL2_STREAM0_SLICE_WIDTH__MASK;
>>   		reg_ctrl2 |= DSI_COMMAND_COMPRESSION_MODE_CTRL2_STREAM0_SLICE_WIDTH(bytes_in_slice);
>>   
>> -		dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg);
>> +		dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg_ctrl);
>>   		dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);
>>   	} else {
>>   		dsi_write(msm_host, REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
>> -- 
>> 2.35.1
>>


More information about the dri-devel mailing list