[PATCH] drm/panel: simple: Add Multi-Inno Technology MI0800FT-9

[Christoph Niedermaier]

Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel support.

Signed-off-by: Christoph Niedermaier <cniedermaier at dh-electronics.com>
Cc: Sam Ravnborg <sam at ravnborg.org>
To: dri-devel at lists.freedesktop.org
---
 drivers/gpu/drm/panel/panel-simple.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index ff5e1a44c43a..f5b632989285 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2703,6 +2703,36 @@ static const struct panel_desc multi_inno_mi0700s4t_6 = {
 	.connector_type = DRM_MODE_CONNECTOR_DPI,
 };
 
+static const struct display_timing multi_inno_mi0800ft_9_timing = {
+	.pixelclock = { 32000000, 40000000, 50000000 },
+	.hactive = { 800, 800, 800 },
+	.hfront_porch = { 16, 210, 354 },
+	.hback_porch = { 6, 26, 45 },
+	.hsync_len = { 1, 20, 40 },
+	.vactive = { 600, 600, 600 },
+	.vfront_porch = { 1, 12, 77 },
+	.vback_porch = { 3, 13, 22 },
+	.vsync_len = { 1, 10, 20 },
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		 DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE |
+		 DISPLAY_FLAGS_SYNC_POSEDGE,
+};
+
+static const struct panel_desc multi_inno_mi0800ft_9 = {
+	.timings = &multi_inno_mi0800ft_9_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 162,
+		.height = 122,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH |
+		     DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
+		     DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct display_timing multi_inno_mi1010ait_1cp_timing = {
 	.pixelclock = { 68900000, 70000000, 73400000 },
 	.hactive = { 1280, 1280, 1280 },
@@ -4104,6 +4134,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "multi-inno,mi0700s4t-6",
 		.data = &multi_inno_mi0700s4t_6,
 	}, {
+		.compatible = "multi-inno,mi0800ft-9",
+		.data = &multi_inno_mi0800ft_9,
+	}, {
 		.compatible = "multi-inno,mi1010ait-1cp",
 		.data = &multi_inno_mi1010ait_1cp,
 	}, {
-- 
2.11.0