[PATCH] drm/msm/dp: add atomic_check to bridge ops
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Mon Aug 22 16:49:16 UTC 2022
On 22/08/2022 19:38, Abhinav Kumar wrote:
> Hi Dmitry
>
> On 8/22/2022 9:18 AM, Dmitry Baryshkov wrote:
>> On 17/08/2022 21:01, Kuogee Hsieh wrote:
>>> DRM commit_tails() will disable downstream crtc/encoder/bridge if
>>> both disable crtc is required and crtc->active is set before pushing
>>> a new frame downstream.
>>>
>>> There is a rare case that user space display manager issue an extra
>>> screen update immediately followed by close DRM device while down
>>> stream display interface is disabled. This extra screen update will
>>> timeout due to the downstream interface is disabled but will cause
>>> crtc->active be set. Hence the followed commit_tails() called by
>>> drm_release() will pass the disable downstream crtc/encoder/bridge
>>> conditions checking even downstream interface is disabled.
>>> This cause the crash to happen at dp_bridge_disable() due to it trying
>>> to access the main link register to push the idle pattern out while main
>>> link clocks is disabled.
>>>
>>> This patch adds atomic_check to prevent the extra frame will not
>>> be pushed down if display interface is down so that crtc->active
>>> will not be set neither. This will fail the conditions checking
>>> of disabling down stream crtc/encoder/bridge which prevent
>>> drm_release() from calling dp_bridge_disable() so that crash
>>> at dp_bridge_disable() prevented.
>>
>> I must admit I had troubles parsing this description. However if I got
>> you right, I think the check that the main link clock is running in
>> the dp_bridge_disable() or dp_ctrl_push_idle() would be a better fix.
>
> Originally, thats what was posted
> https://patchwork.freedesktop.org/patch/496984/.
This patch is also not so correct from my POV. It checks for the hpd
status, while in reality it should check for main link clocks being enabled.
>
> Then it seemed like we were just protecting against an issue in the
> framework which was allowing the frames to be pushed even after the
> display was disconnected. The DP driver did send out the disconnect
> event correctly and as per the logs, this frame came down after that and
> the DRM fwk did allow it.
>
> So after discussing on IRC with Rob, we came up with this approach that
> if the display is not connected, then atomic_check should fail. That way
> the commit will not happen.
>
> Just seemed a bit cleaner instead of adding all our protections.
The check to fail atomic_check if display is not connected seems out of
place. In its current way it begs go to the upper layer, forbidding
using disconnected sinks for all the drivers. There is nothing special
in the MSM DP driver with respect to the HPD events processing and
failing atomic_check() based on that.
>
>>
>>>
>>> SError Interrupt on CPU7, code 0x00000000be000411 -- SError
>>> CPU: 7 PID: 3878 Comm: Xorg Not tainted 5.19.0-stb-cbq #19
>>> Hardware name: Google Lazor (rev3 - 8) (DT)
>>> pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
>>> pc : __cmpxchg_case_acq_32+0x14/0x2c
>>> lr : do_raw_spin_lock+0xa4/0xdc
>>> sp : ffffffc01092b6a0
>>> x29: ffffffc01092b6a0 x28: 0000000000000028 x27: 0000000000000038
>>> x26: 0000000000000004 x25: ffffffd2973dce48 x24: 0000000000000000
>>> x23: 00000000ffffffff x22: 00000000ffffffff x21: ffffffd2978d0008
>>> x20: ffffffd2978d0008 x19: ffffff80ff759fc0 x18: 0000000000000000
>>> x17: 004800a501260460 x16: 0441043b04600438 x15: 04380000089807d0
>>> x14: 07b0089807800780 x13: 0000000000000000 x12: 0000000000000000
>>> x11: 0000000000000438 x10: 00000000000007d0 x9 : ffffffd2973e09e4
>>> x8 : ffffff8092d53300 x7 : ffffff808902e8b8 x6 : 0000000000000001
>>> x5 : ffffff808902e880 x4 : 0000000000000000 x3 : ffffff80ff759fc0
>>> x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffffff80ff759fc0
>>> Kernel panic - not syncing: Asynchronous SError Interrupt
>>> CPU: 7 PID: 3878 Comm: Xorg Not tainted 5.19.0-stb-cbq #19
>>> Hardware name: Google Lazor (rev3 - 8) (DT)
>>> Call trace:
>>> dump_backtrace.part.0+0xbc/0xe4
>>> show_stack+0x24/0x70
>>> dump_stack_lvl+0x68/0x84
>>> dump_stack+0x18/0x34
>>> panic+0x14c/0x32c
>>> nmi_panic+0x58/0x7c
>>> arm64_serror_panic+0x78/0x84
>>> do_serror+0x40/0x64
>>> el1h_64_error_handler+0x30/0x48
>>> el1h_64_error+0x68/0x6c
>>> __cmpxchg_case_acq_32+0x14/0x2c
>>> _raw_spin_lock_irqsave+0x38/0x4c
>>> lock_timer_base+0x40/0x78
>>> __mod_timer+0xf4/0x25c
>>> schedule_timeout+0xd4/0xfc
>>> __wait_for_common+0xac/0x140
>>> wait_for_completion_timeout+0x2c/0x54
>>> dp_ctrl_push_idle+0x40/0x88
>>> dp_bridge_disable+0x24/0x30
>>> drm_atomic_bridge_chain_disable+0x90/0xbc
>>> drm_atomic_helper_commit_modeset_disables+0x198/0x444
>>> msm_atomic_commit_tail+0x1d0/0x374
>>> commit_tail+0x80/0x108
>>> drm_atomic_helper_commit+0x118/0x11c
>>> drm_atomic_commit+0xb4/0xe0
>>> drm_client_modeset_commit_atomic+0x184/0x224
>>> drm_client_modeset_commit_locked+0x58/0x160
>>> drm_client_modeset_commit+0x3c/0x64
>>> __drm_fb_helper_restore_fbdev_mode_unlocked+0x98/0xac
>>> drm_fb_helper_set_par+0x74/0x80
>>> drm_fb_helper_hotplug_event+0xdc/0xe0
>>> __drm_fb_helper_restore_fbdev_mode_unlocked+0x7c/0xac
>>> drm_fb_helper_restore_fbdev_mode_unlocked+0x20/0x2c
>>> drm_fb_helper_lastclose+0x20/0x2c
>>> drm_lastclose+0x44/0x6c
>>> drm_release+0x88/0xd4
>>> __fput+0x104/0x220
>>> ____fput+0x1c/0x28
>>> task_work_run+0x8c/0x100
>>> do_exit+0x450/0x8d0
>>> do_group_exit+0x40/0xac
>>> __wake_up_parent+0x0/0x38
>>> invoke_syscall+0x84/0x11c
>>> el0_svc_common.constprop.0+0xb8/0xe4
>>> do_el0_svc+0x8c/0xb8
>>> el0_svc+0x2c/0x54
>>> el0t_64_sync_handler+0x120/0x1c0
>>> el0t_64_sync+0x190/0x194
>>> SMP: stopping secondary CPUs
>>> Kernel Offset: 0x128e800000 from 0xffffffc008000000
>>> PHYS_OFFSET: 0x80000000
>>> CPU features: 0x800,00c2a015,19801c82
>>> Memory Limit: none
>>>
>>> Fixes: 8a3b4c17f863 ("drm/msm/dp: employ bridge mechanism for display
>>> enable and disable")
>>> Reported-by: Leonard Lausen <leonard at lausen.nl>
>>> Suggested-by: Rob Clark <robdclark at gmail.com>
>>> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/17
>>> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
>>> ---
>>> drivers/gpu/drm/msm/dp/dp_drm.c | 23 +++++++++++++++++++++++
>>> 1 file changed, 23 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c
>>> b/drivers/gpu/drm/msm/dp/dp_drm.c
>>> index 6df25f7..c682588 100644
>>> --- a/drivers/gpu/drm/msm/dp/dp_drm.c
>>> +++ b/drivers/gpu/drm/msm/dp/dp_drm.c
>>> @@ -31,6 +31,25 @@ static enum drm_connector_status
>>> dp_bridge_detect(struct drm_bridge *bridge)
>>> connector_status_disconnected;
>>> }
>>> +static int dp_bridge_atomic_check(struct drm_bridge *bridge,
>>> + struct drm_bridge_state *bridge_state,
>>> + struct drm_crtc_state *crtc_state,
>>> + struct drm_connector_state *conn_state)
>>> +{
>>> + struct msm_dp *dp;
>>> +
>>> + dp = to_dp_bridge(bridge)->dp_display;
>>> +
>>> + drm_dbg_dp(dp->drm_dev, "is_connected = %s\n",
>>> + (dp->is_connected) ? "true" : "false");
>>> +
>>> + if (bridge->ops & DRM_BRIDGE_OP_HPD)
>>> + return (dp->is_connected) ? 0 : -ENOTCONN;
This raises questions if this will work for the configurations when
other bridge is used for HPD events.
Let's not mix the levels of processing. If we should not disable the
link because it is already disabled, let's just do so rather than
failing the atomic_check().
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +
>>> /**
>>> * dp_bridge_get_modes - callback to add drm modes via
>>> drm_mode_probed_add()
>>> * @bridge: Poiner to drm bridge
>>> @@ -61,6 +80,9 @@ static int dp_bridge_get_modes(struct drm_bridge
>>> *bridge, struct drm_connector *
>>> }
>>> static const struct drm_bridge_funcs dp_bridge_ops = {
>>> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
>>> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
>>> + .atomic_reset = drm_atomic_helper_bridge_reset,
>>> .enable = dp_bridge_enable,
>>> .disable = dp_bridge_disable,
>>> .post_disable = dp_bridge_post_disable,
>>> @@ -68,6 +90,7 @@ static const struct drm_bridge_funcs dp_bridge_ops = {
>>> .mode_valid = dp_bridge_mode_valid,
>>> .get_modes = dp_bridge_get_modes,
>>> .detect = dp_bridge_detect,
>>> + .atomic_check = dp_bridge_atomic_check,
>>> };
>>> struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct
>>> drm_device *dev,
>>
--
With best wishes
Dmitry
More information about the dri-devel
mailing list