[PATCH v3 4/9] dt-bindings: display/msm: move qcom, sc7280-mdss schema to mdss.yaml

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Mon Aug 22 20:18:03 UTC 2022


Move schema for qcom,sc7280-mdss from dpu-sc7280.yaml to mdss.yaml so
that the dpu file describes only the DPU schema.

Reviewed-by: Rob Herring <robh at kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 .../bindings/display/msm/dpu-sc7280.yaml      | 148 +++++-------------
 .../devicetree/bindings/display/msm/mdss.yaml |  19 +++
 2 files changed, 57 insertions(+), 110 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
index f427eec3d3a4..349a454099ad 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
@@ -10,149 +10,77 @@ maintainers:
   - Krishna Manikandan <quic_mkrishn at quicinc.com>
 
 description: |
-  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
-  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
-  bindings of MDSS and DPU are mentioned for SC7280.
+  Device tree bindings for the DPU display controller for SC7280 target.
 
 properties:
   compatible:
-    const: qcom,sc7280-mdss
+    const: qcom,sc7280-dpu
 
   reg:
-    maxItems: 1
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
 
   reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
+    items:
+      - const: mdp
+      - const: vbif
 
   clocks:
     items:
-      - description: Display AHB clock from gcc
-      - description: Display AHB clock from dispcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display ahb clock
+      - description: Display lut clock
       - description: Display core clock
+      - description: Display vsync clock
 
   clock-names:
     items:
+      - const: bus
+      - const: nrt_bus
       - const: iface
-      - const: ahb
+      - const: lut
       - const: core
+      - const: vsync
 
   interrupts:
     maxItems: 1
 
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-
-  ranges: true
-
-  interconnects:
-    items:
-      - description: Interconnect path specifying the port ids for data bus
-
-  interconnect-names:
-    const: mdp0-mem
+  power-domains:
+    maxItems: 1
 
-  resets:
-    items:
-      - description: MDSS_CORE reset
+  operating-points-v2: true
 
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains the list of output ports from DPU device. These ports
+      connect to interfaces that are external to the DPU hardware,
+      such as DSI, DP etc. Each output port contains an endpoint that
+      describes how it is connected to an external interface.
 
     properties:
-      compatible:
-        const: qcom,sc7280-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: vbif
-
-      clocks:
-        items:
-          - description: Display hf axi clock
-          - description: Display sf axi clock
-          - description: Display ahb clock
-          - description: Display lut clock
-          - description: Display core clock
-          - description: Display vsync clock
-
-      clock-names:
-        items:
-          - const: bus
-          - const: nrt_bus
-          - const: iface
-          - const: lut
-          - const: core
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI, DP etc. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port at 0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI)
-
-          port at 1:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF5 (EDP)
-
-        required:
-          - port at 0
+      port at 0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DPU_INTF1 (DSI)
+
+      port at 1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DPU_INTF5 (EDP)
 
     required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
+      - port at 0
 
 required:
   - compatible
   - reg
   - reg-names
-  - power-domains
   - clocks
   - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
+  - power-domains
+  - operating-points-v2
+  - ports
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/msm/mdss.yaml b/Documentation/devicetree/bindings/display/msm/mdss.yaml
index ef1a4b1f7949..25815acd37f3 100644
--- a/Documentation/devicetree/bindings/display/msm/mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/mdss.yaml
@@ -18,6 +18,7 @@ properties:
   compatible:
     enum:
       - qcom,sc7180-mdss
+      - qcom,sc7280-mdss
       - qcom,sdm845-mdss
       - qcom,mdss
 
@@ -167,6 +168,7 @@ allOf:
           contains:
             enum:
               - qcom,sc7180-mdss
+              - qcom,sc7280-mdss
     then:
       properties:
         clocks:
@@ -206,6 +208,7 @@ patternProperties:
   "^display-controller@[1-9a-f][0-9a-f]*$":
     oneOf:
       - $ref: dpu-sc7180.yaml
+      - $ref: dpu-sc7280.yaml
       - $ref: dpu-sdm845.yaml
 
   "^displayport-controller@[1-9a-f][0-9a-f]*$":
@@ -229,6 +232,14 @@ patternProperties:
       - $ref: dsi-phy-10nm.yaml#
       - $ref: dsi-phy-7nm.yaml#
 
+  "^edp@[1-9a-f][0-9a-f]*$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,sc7280-edp
+          - qcom,sc8180x-edp
+
   "^hdmi-phy@[1-9a-f][0-9a-f]*$":
     oneOf:
       - $ref: /schemas/phy/qcom,hdmi-phy-qmp.yaml#
@@ -237,6 +248,14 @@ patternProperties:
   "^hdmi-tx@[1-9a-f][0-9a-f]*$":
     $ref: hdmi.yaml#
 
+  "^phy@[1-9a-f][0-9a-f]*$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,sc7280-dsi-phy-7nm
+          - qcom,sc7280-edp-phy
+
 additionalProperties: false
 
 examples:
-- 
2.35.1



More information about the dri-devel mailing list