[PATCH] drm: Move radeon and amdgpu Kconfig options into their directories

Randy Dunlap rdunlap at infradead.org
Tue Aug 23 00:06:59 UTC 2022


Hi--

On 8/22/22 17:01, Andrew Davis wrote:
> Most Kconfig options to enable a driver are in the Kconfig file
> inside the relevant directory, move these two to the same.
> 
> Signed-off-by: Andrew Davis <afd at ti.com>
> ---
>  drivers/gpu/drm/Kconfig            | 42 ------------------------------
>  drivers/gpu/drm/amd/amdgpu/Kconfig | 22 ++++++++++++++++
>  drivers/gpu/drm/radeon/Kconfig     | 22 ++++++++++++++++
>  3 files changed, 44 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 6c2256e8474b..24fa9ccd92a4 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -234,50 +234,8 @@ source "drivers/gpu/drm/i2c/Kconfig"
>  
>  source "drivers/gpu/drm/arm/Kconfig"
>  
> -config DRM_RADEON
> -	tristate "ATI Radeon"
> -	depends on DRM && PCI && MMU
> -	depends on AGP || !AGP
> -	select FW_LOADER
> -	select DRM_DISPLAY_DP_HELPER
> -	select DRM_DISPLAY_HELPER
> -        select DRM_KMS_HELPER
> -        select DRM_TTM
> -	select DRM_TTM_HELPER
> -	select POWER_SUPPLY
> -	select HWMON
> -	select BACKLIGHT_CLASS_DEVICE
> -	select INTERVAL_TREE
> -	help
> -	  Choose this option if you have an ATI Radeon graphics card.  There
> -	  are both PCI and AGP versions.  You don't need to choose this to
> -	  run the Radeon in plain VGA mode.
> -
> -	  If M is selected, the module will be called radeon.
> -
>  source "drivers/gpu/drm/radeon/Kconfig"
>  
> -config DRM_AMDGPU
> -	tristate "AMD GPU"
> -	depends on DRM && PCI && MMU
> -	select FW_LOADER
> -	select DRM_DISPLAY_DP_HELPER
> -	select DRM_DISPLAY_HDMI_HELPER
> -	select DRM_DISPLAY_HELPER
> -	select DRM_KMS_HELPER
> -	select DRM_SCHED
> -	select DRM_TTM
> -	select DRM_TTM_HELPER
> -	select POWER_SUPPLY
> -	select HWMON
> -	select BACKLIGHT_CLASS_DEVICE
> -	select INTERVAL_TREE
> -	select DRM_BUDDY
> -	help
> -	  Choose this option if you have a recent AMD Radeon graphics card.
> -
> -	  If M is selected, the module will be called amdgpu.
> -
>  source "drivers/gpu/drm/amd/amdgpu/Kconfig"
>  
>  source "drivers/gpu/drm/nouveau/Kconfig"
> diff --git a/drivers/gpu/drm/amd/amdgpu/Kconfig b/drivers/gpu/drm/amd/amdgpu/Kconfig
> index 7777d55275de..36b1206124cf 100644
> --- a/drivers/gpu/drm/amd/amdgpu/Kconfig
> +++ b/drivers/gpu/drm/amd/amdgpu/Kconfig
> @@ -1,4 +1,26 @@
>  # SPDX-License-Identifier: MIT
> +
> +config DRM_AMDGPU
> +	tristate "AMD GPU"
> +	depends on DRM && PCI && MMU
> +	select FW_LOADER
> +	select DRM_DISPLAY_DP_HELPER
> +	select DRM_DISPLAY_HDMI_HELPER
> +	select DRM_DISPLAY_HELPER
> +	select DRM_KMS_HELPER
> +	select DRM_SCHED
> +	select DRM_TTM
> +	select DRM_TTM_HELPER
> +	select POWER_SUPPLY
> +	select HWMON
> +	select BACKLIGHT_CLASS_DEVICE
> +	select INTERVAL_TREE
> +	select DRM_BUDDY
> +	help
> +	  Choose this option if you have a recent AMD Radeon graphics card.
> +
> +	  If M is selected, the module will be called amdgpu.
> +
>  config DRM_AMDGPU_SI
>  	bool "Enable amdgpu support for SI parts"
>  	depends on DRM_AMDGPU
> diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig
> index 52819e7f1fca..3248d12c562d 100644
> --- a/drivers/gpu/drm/radeon/Kconfig
> +++ b/drivers/gpu/drm/radeon/Kconfig
> @@ -1,4 +1,26 @@
>  # SPDX-License-Identifier: MIT
> +
> +config DRM_RADEON
> +	tristate "ATI Radeon"
> +	depends on DRM && PCI && MMU
> +	depends on AGP || !AGP
> +	select FW_LOADER
> +	select DRM_DISPLAY_DP_HELPER
> +	select DRM_DISPLAY_HELPER
> +        select DRM_KMS_HELPER
> +        select DRM_TTM

Would you change those 2 lines above to use one tab + 2 spaces
for indentation, please?

> +	select DRM_TTM_HELPER
> +	select POWER_SUPPLY
> +	select HWMON
> +	select BACKLIGHT_CLASS_DEVICE
> +	select INTERVAL_TREE
> +	help
> +	  Choose this option if you have an ATI Radeon graphics card.  There
> +	  are both PCI and AGP versions.  You don't need to choose this to
> +	  run the Radeon in plain VGA mode.
> +
> +	  If M is selected, the module will be called radeon.
> +
>  config DRM_RADEON_USERPTR
>  	bool "Always enable userptr support"
>  	depends on DRM_RADEON

-- 
~Randy


More information about the dri-devel mailing list