[PATCH v26 07/10] soc: mediatek: mmsys: add mmsys for support 64 reset bits

Matthias Brugger matthias.bgg at gmail.com
Tue Aug 23 10:20:48 UTC 2022



On 19/08/2022 08:10, Nancy.Lin wrote:
> Add mmsys for support 64 reset bits. It is a preparation for MT8195
> vdosys1 HW reset. MT8195 vdosys1 has more than 32 reset bits.
> 
> 1. Add the number of reset bits in mmsys private data
> 2. move the whole "reset register code section" behind the
> "get mmsys->data" code section for getting the num_resets in mmsys->data.
> 
> Signed-off-by: Nancy.Lin <nancy.lin at mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> Reviewed-by: CK Hu <ck.hu at mediatek.com>
> Tested-by: Bo-Chen Chen <rex-bc.chen at mediatek.com>
> ---
>   drivers/soc/mediatek/mtk-mmsys.c | 40 +++++++++++++++++++++-----------
>   drivers/soc/mediatek/mtk-mmsys.h |  1 +
>   2 files changed, 27 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> index 999be064103b..20ae751ad8a7 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.c
> +++ b/drivers/soc/mediatek/mtk-mmsys.c
> @@ -20,6 +20,8 @@
>   #include "mt8195-mmsys.h"
>   #include "mt8365-mmsys.h"
>   
> +#define MMSYS_SW_RESET_PER_REG 32
> +
>   static const struct mtk_mmsys_driver_data mt2701_mmsys_driver_data = {
>   	.clk_driver = "clk-mt2701-mm",
>   	.routes = mmsys_default_routing_table,
> @@ -86,6 +88,7 @@ static const struct mtk_mmsys_driver_data mt8173_mmsys_driver_data = {
>   	.routes = mmsys_default_routing_table,
>   	.num_routes = ARRAY_SIZE(mmsys_default_routing_table),
>   	.sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
> +	.num_resets = 32,
>   };
>   
>   static const struct mtk_mmsys_match_data mt8173_mmsys_match_data = {
> @@ -100,6 +103,7 @@ static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
>   	.routes = mmsys_mt8183_routing_table,
>   	.num_routes = ARRAY_SIZE(mmsys_mt8183_routing_table),
>   	.sw0_rst_offset = MT8183_MMSYS_SW0_RST_B,
> +	.num_resets = 32,
>   };
>   
>   static const struct mtk_mmsys_match_data mt8183_mmsys_match_data = {
> @@ -114,6 +118,7 @@ static const struct mtk_mmsys_driver_data mt8186_mmsys_driver_data = {
>   	.routes = mmsys_mt8186_routing_table,
>   	.num_routes = ARRAY_SIZE(mmsys_mt8186_routing_table),
>   	.sw0_rst_offset = MT8186_MMSYS_SW0_RST_B,
> +	.num_resets = 32,
>   };
>   
>   static const struct mtk_mmsys_match_data mt8186_mmsys_match_data = {
> @@ -128,6 +133,7 @@ static const struct mtk_mmsys_driver_data mt8192_mmsys_driver_data = {
>   	.routes = mmsys_mt8192_routing_table,
>   	.num_routes = ARRAY_SIZE(mmsys_mt8192_routing_table),
>   	.sw0_rst_offset = MT8186_MMSYS_SW0_RST_B,
> +	.num_resets = 32,

You didn't reply to Nicolas regarding the reset numbers. I actually agree with 
him that we will need the num_resets declared for all devices. Why do you think 
this is not the case?

Regards,
Matthias


>   };
>   
>   static const struct mtk_mmsys_match_data mt8192_mmsys_match_data = {
> @@ -288,13 +294,19 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
>   {
>   	struct mtk_mmsys *mmsys = container_of(rcdev, struct mtk_mmsys, rcdev);
>   	unsigned long flags;
> +	u32 offset;
> +	u32 reg;
> +
> +	offset = (id / MMSYS_SW_RESET_PER_REG) * sizeof(u32);
> +	id = id % MMSYS_SW_RESET_PER_REG;
> +	reg = mmsys->data->sw0_rst_offset + offset;
>   
>   	spin_lock_irqsave(&mmsys->lock, flags);
>   
>   	if (assert)
> -		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), 0, NULL);
> +		mtk_mmsys_update_bits(mmsys, reg, BIT(id), 0, NULL);
>   	else
> -		mtk_mmsys_update_bits(mmsys, mmsys->data->sw0_rst_offset, BIT(id), BIT(id), NULL);
> +		mtk_mmsys_update_bits(mmsys, reg, BIT(id), BIT(id), NULL);
>   
>   	spin_unlock_irqrestore(&mmsys->lock, flags);
>   
> @@ -351,18 +363,6 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
>   		return ret;
>   	}
>   
> -	spin_lock_init(&mmsys->lock);
> -
> -	mmsys->rcdev.owner = THIS_MODULE;
> -	mmsys->rcdev.nr_resets = 32;
> -	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
> -	mmsys->rcdev.of_node = pdev->dev.of_node;
> -	ret = devm_reset_controller_register(&pdev->dev, &mmsys->rcdev);
> -	if (ret) {
> -		dev_err(&pdev->dev, "Couldn't register mmsys reset controller: %d\n", ret);
> -		return ret;
> -	}
> -
>   	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>   	if (!res) {
>   		dev_err(dev, "Couldn't get mmsys resource\n");
> @@ -384,6 +384,18 @@ static int mtk_mmsys_probe(struct platform_device *pdev)
>   		mmsys->data = match_data->drv_data[0];
>   	}
>   
> +	spin_lock_init(&mmsys->lock);
> +
> +	mmsys->rcdev.owner = THIS_MODULE;
> +	mmsys->rcdev.nr_resets = mmsys->data->num_resets;
> +	mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
> +	mmsys->rcdev.of_node = pdev->dev.of_node;
> +	ret = devm_reset_controller_register(&pdev->dev, &mmsys->rcdev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Couldn't register mmsys reset controller: %d\n", ret);
> +		return ret;
> +	}
> +
>   #if IS_REACHABLE(CONFIG_MTK_CMDQ)
>   	ret = cmdq_dev_get_client_reg(dev, &mmsys->cmdq_base, 0);
>   	if (ret)
> diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
> index f01ba206481d..20a271b80b3b 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.h
> +++ b/drivers/soc/mediatek/mtk-mmsys.h
> @@ -92,6 +92,7 @@ struct mtk_mmsys_driver_data {
>   	const struct mtk_mmsys_routes *routes;
>   	const unsigned int num_routes;
>   	const u16 sw0_rst_offset;
> +	const u32 num_resets;
>   };
>   
>   struct mtk_mmsys_match_data {


More information about the dri-devel mailing list