[PATCH v4 05/10] dt-bindings: display/msm: move qcom, qcm2290-mdss schema to mdss.yaml
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Aug 25 09:50:58 UTC 2022
Move schema for qcom,qcm2290-mdss from dpu-qcm2290.yaml to mdss.yaml so
that the dpu file describes only the DPU schema.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
.../bindings/display/msm/dpu-qcm2290.yaml | 140 +++++-------------
.../devicetree/bindings/display/msm/mdss.yaml | 49 ++++++
2 files changed, 82 insertions(+), 107 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
index 734d14de966d..8027319b1aad 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml
@@ -10,146 +10,72 @@ maintainers:
- Loic Poulain <loic.poulain at linaro.org>
description: |
- Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
- sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
- and DPU are mentioned for QCM2290 target.
+ Device tree bindings for the DPU display controller for QCM2290 target.
properties:
compatible:
items:
- - const: qcom,qcm2290-mdss
+ - const: qcom,qcm2290-dpu
reg:
- maxItems: 1
+ items:
+ - description: Address offset and size for mdp register set
+ - description: Address offset and size for vbif register set
reg-names:
- const: mdss
-
- power-domains:
- maxItems: 1
+ items:
+ - const: mdp
+ - const: vbif
clocks:
items:
- - description: Display AHB clock from gcc
- - description: Display AXI clock
- - description: Display core clock
+ - description: Display AXI clock from gcc
+ - description: Display AHB clock from dispcc
+ - description: Display core clock from dispcc
+ - description: Display lut clock from dispcc
+ - description: Display vsync clock from dispcc
clock-names:
items:
- - const: iface
- const: bus
+ - const: iface
- const: core
+ - const: lut
+ - const: vsync
interrupts:
maxItems: 1
- interrupt-controller: true
-
- "#address-cells": true
-
- "#size-cells": true
-
- "#interrupt-cells":
- const: 1
-
- iommus:
- items:
- - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
- - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
-
- ranges: true
-
- interconnects:
- items:
- - description: Interconnect path specifying the port ids for data bus
-
- interconnect-names:
- const: mdp0-mem
+ power-domains:
+ maxItems: 1
- resets:
- items:
- - description: MDSS_CORE reset
+ operating-points-v2: true
-patternProperties:
- "^display-controller@[0-9a-f]+$":
- type: object
- description: Node containing the properties of DPU.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description: |
+ Contains the list of output ports from DPU device. These ports
+ connect to interfaces that are external to the DPU hardware,
+ such as DSI. Each output port contains an endpoint that
+ describes how it is connected to an external interface.
properties:
- compatible:
- items:
- - const: qcom,qcm2290-dpu
-
- reg:
- items:
- - description: Address offset and size for mdp register set
- - description: Address offset and size for vbif register set
-
- reg-names:
- items:
- - const: mdp
- - const: vbif
-
- clocks:
- items:
- - description: Display AXI clock from gcc
- - description: Display AHB clock from dispcc
- - description: Display core clock from dispcc
- - description: Display lut clock from dispcc
- - description: Display vsync clock from dispcc
-
- clock-names:
- items:
- - const: bus
- - const: iface
- - const: core
- - const: lut
- - const: vsync
-
- interrupts:
- maxItems: 1
-
- power-domains:
- maxItems: 1
-
- operating-points-v2: true
-
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
- description: |
- Contains the list of output ports from DPU device. These ports
- connect to interfaces that are external to the DPU hardware,
- such as DSI. Each output port contains an endpoint that
- describes how it is connected to an external interface.
-
- properties:
- port at 0:
- $ref: /schemas/graph.yaml#/properties/port
- description: DPU_INTF1 (DSI1)
-
- required:
- - port at 0
+ port at 0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: DPU_INTF1 (DSI1)
required:
- - compatible
- - reg
- - reg-names
- - clocks
- - interrupts
- - power-domains
- - operating-points-v2
- - ports
+ - port at 0
required:
- compatible
- reg
- reg-names
- - power-domains
- clocks
- interrupts
- - interrupt-controller
- - iommus
- - ranges
+ - power-domains
+ - operating-points-v2
+ - ports
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/msm/mdss.yaml b/Documentation/devicetree/bindings/display/msm/mdss.yaml
index 8d748fc5359c..0c6d68f2a450 100644
--- a/Documentation/devicetree/bindings/display/msm/mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/mdss.yaml
@@ -18,6 +18,7 @@ properties:
compatible:
enum:
- qcom,mdss
+ - qcom,qcm2290-mdss
- qcom,sc7180-mdss
- qcom,sc7280-mdss
- qcom,sdm845-mdss
@@ -142,6 +143,28 @@ allOf:
required:
- iommus
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,qcm2290-mdss
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AXI clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: bus
+ - const: core
+
+ iommus:
+ minItems: 2
+
- if:
properties:
compatible:
@@ -239,6 +262,32 @@ allOf:
- qcom,hdmi-tx-8994
- qcom,hdmi-tx-8996
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,qcm2290-mdss
+ then:
+ patternProperties:
+ "^display-controller@[1-9a-f][0-9a-f]*$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,qcm2290-dpu
+
+ "^dsi@[1-9a-f][0-9a-f]*$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,dsi-ctrl-6g-qcm2290
+
+ "^phy@[1-9a-f][0-9a-f]*$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - qcom,dsi-phy-14nm
+
- if:
properties:
compatible:
--
2.35.1
More information about the dri-devel
mailing list