[PATCH] drm/bridge: anx7625: Support HDMI_I2S audio format

Robert Foss robert.foss at linaro.org
Mon Aug 29 13:56:31 UTC 2022


On Wed, 10 Aug 2022 at 10:58, Hsin-Yi Wang <hsinyi at chromium.org> wrote:
>
> On Tue, Jul 26, 2022 at 5:16 PM Jiaxin Yu <jiaxin.yu at mediatek.com> wrote:
> >
> > On Tue, 2022-07-26 at 11:30 +0800, Xin Ji wrote:
> > > 1. Support HDMI_I2S audio format.
> > > 2. Return 0 if there is no sink connection in .hw_param callback.
> > >
> > > Signed-off-by: Xin Ji <xji at analogixsemi.com>
> > > ---
> > >  drivers/gpu/drm/bridge/analogix/anx7625.c | 23 +++++++++++++++++--
> > > ----
> > >  1 file changed, 17 insertions(+), 6 deletions(-)
> > >
> > Acked-by: Jiaxin Yu<jiaxin.yu at mediatek.com>
> Acked-by: Hsin-Yi Wang <hsinyi at chromium.org>
>
> > > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > > b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > > index 79fc7a50b497..c74b5df4cade 100644
> > > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > > @@ -1797,8 +1797,13 @@ static int anx7625_audio_hw_params(struct
> > > device *dev, void *data,
> > >       int wl, ch, rate;
> > >       int ret = 0;
> > >
> > > -     if (fmt->fmt != HDMI_DSP_A) {
> > > -             DRM_DEV_ERROR(dev, "only supports DSP_A\n");
> > > +     if (anx7625_sink_detect(ctx) == connector_status_disconnected)
> > > {
> > > +             DRM_DEV_DEBUG_DRIVER(dev, "DP not connected\n");
> > > +             return 0;
> > > +     }
> > > +
> > > +     if (fmt->fmt != HDMI_DSP_A && fmt->fmt != HDMI_I2S) {
> > > +             DRM_DEV_ERROR(dev, "only supports DSP_A & I2S\n");
> > >               return -EINVAL;
> > >       }
> > >
> > > @@ -1806,10 +1811,16 @@ static int anx7625_audio_hw_params(struct
> > > device *dev, void *data,
> > >                            params->sample_rate, params->sample_width,
> > >                            params->cea.channels);
> > >
> > > -     ret |= anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> > > -                                 AUDIO_CHANNEL_STATUS_6,
> > > -                                 ~I2S_SLAVE_MODE,
> > > -                                 TDM_SLAVE_MODE);
> > > +     if (fmt->fmt == HDMI_DSP_A)
> > > +             ret = anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> > > +                                        AUDIO_CHANNEL_STATUS_6,
> > > +                                        ~I2S_SLAVE_MODE,
> > > +                                        TDM_SLAVE_MODE);
> > > +     else
> > > +             ret = anx7625_write_and_or(ctx, ctx->i2c.tx_p2_client,
> > > +                                        AUDIO_CHANNEL_STATUS_6,
> > > +                                        ~TDM_SLAVE_MODE,
> > > +                                        I2S_SLAVE_MODE);
> > >
> > >       /* Word length */
> > >       switch (params->sample_width) {
> >

Applied to drm-misc-next.


More information about the dri-devel mailing list