[PATCH v6 2/2] drm: rcar-du: Add RZ/G2L DSI driver

Laurent Pinchart laurent.pinchart at ideasonboard.com
Mon Aug 29 18:24:48 UTC 2022


Hi Biju,

Thank you for the patch.

On Mon, Aug 29, 2022 at 10:19:01AM +0100, Biju Das wrote:
> This driver supports the MIPI DSI encoder found in the RZ/G2L
> SoC. It currently supports DSI video mode only.
> 
> Signed-off-by: Biju Das <biju.das.jz at bp.renesas.com>
> Acked-by: Sam Ravnborg <sam at ravnborg.org>
> ---
> v5->v6:
>  * Updated commit description
>  * Moved handling of arst and prst from rzg2l_mipi_dsi_startup->runtime
>    PM suspend/resume handlers.
>  * Max lane capability read at probe(), and enforced in
>    rzg2l_mipi_dsi_host_attach()
>  * Simplified vich1ppsetr setting.
>  * Renamed hsclk_running_mode,hsclk_mode->is_clk_cont.
>  * Fixed typo in probe error message(arst->rst).
>  * Reordered DRM bridge initaization in probe()
>  * Updated typo in e-mail address.
> v4->v5:
>  * Added Ack from Sam.
>  * Added a trivial change, replaced rzg2l_mipi_dsi_parse_dt()
>    with drm_of_get_data_lanes_count_ep() in probe.
> v3->v4:
>  * Updated error handling in rzg2l_mipi_dsi_startup() and rzg2l_mipi_dsi_atomic_enable()
> v2->v3:
>  * pass rzg2l_mipi_dsi pointer to {Link,Phy} register rd/wr function instead
>    of the memory pointer
>  * Fixed the comment in rzg2l_mipi_dsi_startup()
>  * Removed unnecessary dbg message from rzg2l_mipi_dsi_start_video()
>  * DRM bridge parameter initialization moved to probe
>  * Replaced dev_dbg->dev_err in rzg2l_mipi_dsi_parse_dt()
>  * Inserted the missing blank lane after return in probe()
>  * Added missing MODULE_DEVICE_TABLE
>  * Added include linux/bits.h in header file
>  * Fixed various macros in header file.
>  * Reorder the make file for DSI, so that it is no more dependent
>    on RZ/G2L DU patch series.
> v1->v2:
>  * Rework based on dt-binding change (DSI + D-PHY) as single block
>  * Replaced link_mmio and phy_mmio with mmio in struct rzg2l_mipi_dsi
>  * Replaced rzg2l_mipi_phy_write with rzg2l_mipi_dsi_phy_write
>    and rzg2l_mipi_dsi_link_write
>  * Replaced rzg2l_mipi_phy_read->rzg2l_mipi_dsi_link_read
> RFC->v1:
>  * Added "depends on ARCH_RENESAS || COMPILE_TEST" on KCONFIG
>    and dropped DRM as it is implied by DRM_BRIDGE
>  * Used devm_reset_control_get_exclusive() for reset handle
>  * Removed bool hsclkmode from struct rzg2l_mipi_dsi
>  * Added error check for pm, using pm_runtime_resume_and_get() instead of
>    pm_runtime_get_sync()
>  * Added check for unsupported formats in rzg2l_mipi_dsi_host_attach()
>  * Avoided read-modify-write stopping hsclock
>  * Used devm_platform_ioremap_resource for resource allocation
>  * Removed unnecessary assert call from probe and remove.
>  * wrap the line after the PTR_ERR() in probe()
>  * Updated reset failure messages in probe
>  * Fixed the typo arstc->prstc
>  * Made hex constants to lower case.
> RFC:
>  * https://patchwork.kernel.org/project/linux-renesas-soc/patch/20220112174612.10773-23-biju.das.jz@bp.renesas.com/
> ---
>  drivers/gpu/drm/rcar-du/Kconfig               |   8 +
>  drivers/gpu/drm/rcar-du/Makefile              |   2 +
>  drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c      | 703 ++++++++++++++++++
>  drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h | 151 ++++
>  4 files changed, 864 insertions(+)
>  create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c
>  create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h
> 
> diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
> index c959e8c6be7d..58ffb8c2443b 100644
> --- a/drivers/gpu/drm/rcar-du/Kconfig
> +++ b/drivers/gpu/drm/rcar-du/Kconfig
> @@ -51,6 +51,14 @@ config DRM_RCAR_MIPI_DSI
>  	help
>  	  Enable support for the R-Car Display Unit embedded MIPI DSI encoders.
>  
> +config DRM_RZG2L_MIPI_DSI
> +	tristate "RZ/G2L MIPI DSI Encoder Support"
> +	depends on DRM_BRIDGE && OF
> +	depends on ARCH_RENESAS || COMPILE_TEST
> +	select DRM_MIPI_DSI
> +	help
> +	  Enable support for the RZ/G2L Display Unit embedded MIPI DSI encoders.
> +
>  config DRM_RCAR_VSP
>  	bool "R-Car DU VSP Compositor Support" if ARM
>  	default y if ARM64
> diff --git a/drivers/gpu/drm/rcar-du/Makefile b/drivers/gpu/drm/rcar-du/Makefile
> index 6f132325c8b7..b8f2c82651d9 100644
> --- a/drivers/gpu/drm/rcar-du/Makefile
> +++ b/drivers/gpu/drm/rcar-du/Makefile
> @@ -14,3 +14,5 @@ obj-$(CONFIG_DRM_RCAR_DU)		+= rcar-du-drm.o
>  obj-$(CONFIG_DRM_RCAR_DW_HDMI)		+= rcar_dw_hdmi.o
>  obj-$(CONFIG_DRM_RCAR_LVDS)		+= rcar_lvds.o
>  obj-$(CONFIG_DRM_RCAR_MIPI_DSI)		+= rcar_mipi_dsi.o
> +
> +obj-$(CONFIG_DRM_RZG2L_MIPI_DSI)	+= rzg2l_mipi_dsi.o
> diff --git a/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c
> new file mode 100644
> index 000000000000..46a71e39e336
> --- /dev/null
> +++ b/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c
> @@ -0,0 +1,703 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * RZ/G2L MIPI DSI Encoder Driver
> + *
> + * Copyright (C) 2022 Renesas Electronics Corporation
> + */
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_graph.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_probe_helper.h>
> +
> +#include "rzg2l_mipi_dsi_regs.h"
> +
> +struct rzg2l_mipi_dsi {
> +	struct device *dev;
> +	void __iomem *mmio;
> +
> +	struct reset_control *rstc;
> +	struct reset_control *arstc;
> +	struct reset_control *prstc;
> +
> +	struct mipi_dsi_host host;
> +	struct drm_bridge bridge;
> +	struct drm_bridge *next_bridge;
> +
> +	struct clk *vclk;
> +
> +	enum mipi_dsi_pixel_format format;
> +	unsigned int num_data_lanes;
> +	unsigned int max_lanes;
> +	unsigned int lanes;
> +	unsigned long mode_flags;
> +};
> +
> +static inline struct rzg2l_mipi_dsi *
> +bridge_to_rzg2l_mipi_dsi(struct drm_bridge *bridge)
> +{
> +	return container_of(bridge, struct rzg2l_mipi_dsi, bridge);
> +}
> +
> +static inline struct rzg2l_mipi_dsi *
> +host_to_rzg2l_mipi_dsi(struct mipi_dsi_host *host)
> +{
> +	return container_of(host, struct rzg2l_mipi_dsi, host);
> +}
> +
> +static void rzg2l_mipi_dsi_phy_write(struct rzg2l_mipi_dsi *dsi, u32 reg, u32 data)
> +{
> +	iowrite32(data, dsi->mmio + reg);
> +}
> +
> +static void rzg2l_mipi_dsi_link_write(struct rzg2l_mipi_dsi *dsi, u32 reg, u32 data)
> +{
> +	iowrite32(data, dsi->mmio + LINK_REG_OFFSET + reg);
> +}
> +
> +static u32 rzg2l_mipi_dsi_link_read(struct rzg2l_mipi_dsi *dsi, u32 reg)
> +{
> +	return ioread32(dsi->mmio + LINK_REG_OFFSET + reg);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Hardware Setup
> + */
> +
> +static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
> +				  const struct drm_display_mode *mode)
> +{
> +	unsigned long hsfreq;
> +	u32 txsetr;
> +	u32 clstptsetr;
> +	u32 lptrnstsetr;
> +	u32 clkkpt;
> +	u32 clkbfht;
> +	u32 clkstpt;
> +	u32 golpbkt;
> +	unsigned int bpp;
> +	struct {
> +		u32 tclk_miss;
> +		u32 t_init;
> +		u32 tclk_prepare;
> +		u32 tclk_settle;
> +		u32 tclk_trail;
> +		u32 tclk_post;
> +		u32 tclk_pre;
> +		u32 tclk_zero;
> +		u32 tlpx;
> +		u32 ths_prepare;
> +		u32 ths_settle;
> +		u32 ths_exit;
> +		u32 ths_trail;
> +		u32 ths_zero;
> +	} timings;
> +	u32 dphyctrl0;
> +	u32 dphytim0;
> +	u32 dphytim1;
> +	u32 dphytim2;
> +	u32 dphytim3;
> +	int ret;
> +
> +	/*
> +	 * Relationship between hsclk and vclk must follow
> +	 * vclk * bpp = hsclk * 8 * lanes
> +	 * where vclk: video clock (Hz)
> +	 *       bpp: video pixel bit depth
> +	 *       hsclk: DSI HS Byte clock frequency (Hz)
> +	 *       lanes: number of data lanes
> +	 *
> +	 * hsclk(bit) = hsclk(byte) * 8
> +	 */
> +	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
> +	hsfreq = (mode->clock * bpp * 8) / (8 * dsi->lanes);
> +
> +	/* All DSI global operation timings are set with recommended setting */
> +	if (hsfreq > 250000) {
> +		timings.tclk_miss = 1;
> +		timings.t_init = 79801;
> +		timings.tclk_prepare = 8;
> +		timings.tclk_settle = 9;
> +		timings.tclk_trail = 7;
> +		timings.tclk_post = 35;
> +		timings.tclk_pre = 4;
> +		timings.tclk_zero = 33;
> +		timings.tlpx = 6;
> +		timings.ths_prepare = 9;
> +		timings.ths_settle = 9;
> +		timings.ths_exit = 13;
> +		timings.ths_trail = 9;
> +		timings.ths_zero = 16;
> +	} else {
> +		timings.tclk_miss = 1;
> +		timings.t_init = 79801;
> +		timings.tclk_prepare = 8;
> +		timings.tclk_settle = 9;
> +		timings.tclk_trail = 10;
> +		timings.tclk_post = 94;
> +		timings.tclk_pre = 13;
> +		timings.tclk_zero = 33;
> +		timings.tlpx = 6;
> +		timings.ths_prepare = 12;
> +		timings.ths_settle = 9;
> +		timings.ths_exit = 13;
> +		timings.ths_trail = 17;
> +		timings.ths_zero = 23;
> +	}
> +
> +	ret = pm_runtime_resume_and_get(dsi->dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	clk_set_rate(dsi->vclk, mode->clock * 1000);
> +
> +	/* Initializing DPHY before accessing LINK */
> +	dphyctrl0 = DSIDPHYCTRL0_CAL_EN_HSRX_OFS | DSIDPHYCTRL0_CMN_MASTER_EN |
> +		    DSIDPHYCTRL0_RE_VDD_DETVCCQLV18 | DSIDPHYCTRL0_EN_BGR;
> +
> +	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYCTRL0, dphyctrl0);
> +	usleep_range(20, 30);
> +
> +	dphyctrl0 |= DSIDPHYCTRL0_EN_LDO1200;
> +	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYCTRL0, dphyctrl0);
> +	usleep_range(10, 20);
> +
> +	dphytim0 = DSIDPHYTIM0_TCLK_MISS(timings.tclk_miss) |
> +		   DSIDPHYTIM0_T_INIT(timings.t_init);
> +	dphytim1 = DSIDPHYTIM1_THS_PREPARE(timings.ths_prepare) |
> +		   DSIDPHYTIM1_TCLK_PREPARE(timings.tclk_prepare) |
> +		   DSIDPHYTIM1_THS_SETTLE(timings.ths_settle) |
> +		   DSIDPHYTIM1_TCLK_SETTLE(timings.tclk_settle);
> +	dphytim2 = DSIDPHYTIM2_TCLK_TRAIL(timings.tclk_trail) |
> +		   DSIDPHYTIM2_TCLK_POST(timings.tclk_post) |
> +		   DSIDPHYTIM2_TCLK_PRE(timings.tclk_pre) |
> +		   DSIDPHYTIM2_TCLK_ZERO(timings.tclk_zero);
> +	dphytim3 = DSIDPHYTIM3_TLPX(timings.tlpx) |
> +		   DSIDPHYTIM3_THS_EXIT(timings.ths_exit) |
> +		   DSIDPHYTIM3_THS_TRAIL(timings.ths_trail) |
> +		   DSIDPHYTIM3_THS_ZERO(timings.ths_zero);
> +
> +	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYTIM0, dphytim0);
> +	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYTIM1, dphytim1);
> +	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYTIM2, dphytim2);
> +	rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYTIM3, dphytim3);
> +
> +	ret = reset_control_deassert(dsi->rstc);
> +	if (ret < 0)
> +		goto err_rstc;
> +
> +	udelay(1);
> +
> +	/* Enable Data lanes and Clock lanes */
> +	txsetr = TXSETR_DLEN | TXSETR_NUMLANEUSE(dsi->lanes - 1) | TXSETR_CLEN;
> +	rzg2l_mipi_dsi_link_write(dsi, TXSETR, txsetr);
> +
> +	/*
> +	 * Global timings characteristic depends on high speed Clock Frequency
> +	 * Currently MIPI DSI-IF just supports maximum FHD at 60 with:
> +	 * - videoclock = 148.5 (MHz)
> +	 * - bpp: maximum 24bpp
> +	 * - data lanes: maximum 4 lanes
> +	 * Therefore maximum hsclk will be 891 Mbps.
> +	 */
> +	if (hsfreq > 445500) {
> +		clkkpt = 12;
> +		clkbfht = 15;
> +		clkstpt = 48;
> +		golpbkt = 75;
> +	} else if (hsfreq > 250000) {
> +		clkkpt = 7;
> +		clkbfht = 8;
> +		clkstpt = 27;
> +		golpbkt = 40;
> +	} else {
> +		clkkpt = 8;
> +		clkbfht = 6;
> +		clkstpt = 24;
> +		golpbkt = 29;
> +	}
> +
> +	clstptsetr = CLSTPTSETR_CLKKPT(clkkpt) | CLSTPTSETR_CLKBFHT(clkbfht) |
> +		     CLSTPTSETR_CLKSTPT(clkstpt);
> +	rzg2l_mipi_dsi_link_write(dsi, CLSTPTSETR, clstptsetr);
> +
> +	lptrnstsetr = LPTRNSTSETR_GOLPBKT(golpbkt);
> +	rzg2l_mipi_dsi_link_write(dsi, LPTRNSTSETR, lptrnstsetr);
> +
> +	return 0;
> +
> +err_rstc:
> +	pm_runtime_put(dsi->dev);
> +
> +	return ret;
> +}
> +
> +static void rzg2l_mipi_dsi_set_display_timing(struct rzg2l_mipi_dsi *dsi,
> +					      const struct drm_display_mode *mode)
> +{
> +	u32 vich1ppsetr;
> +	u32 vich1vssetr;
> +	u32 vich1vpsetr;
> +	u32 vich1hssetr;
> +	u32 vich1hpsetr;
> +	int dsi_format;
> +	u32 delay[2];
> +	u8 index;
> +
> +	/* Configuration for Pixel Packet */
> +	dsi_format = mipi_dsi_pixel_format_to_bpp(dsi->format);
> +	switch (dsi_format) {
> +	case 24:
> +		vich1ppsetr = VICH1PPSETR_DT_RGB24;
> +		break;
> +	case 18:
> +		vich1ppsetr = VICH1PPSETR_DT_RGB18;
> +		break;
> +	}
> +
> +	if ((dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) &&
> +	    !(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST))
> +		vich1ppsetr |= VICH1PPSETR_TXESYNC_PULSE;
> +
> +	rzg2l_mipi_dsi_link_write(dsi, VICH1PPSETR, vich1ppsetr);
> +
> +	/* Configuration for Video Parameters */
> +	vich1vssetr = VICH1VSSETR_VACTIVE(mode->vdisplay) |
> +		      VICH1VSSETR_VSA(mode->vsync_end - mode->vsync_start);
> +	vich1vssetr |= (mode->flags & DRM_MODE_FLAG_PVSYNC) ?
> +			VICH1VSSETR_VSPOL_HIGH : VICH1VSSETR_VSPOL_LOW;
> +
> +	vich1vpsetr = VICH1VPSETR_VFP(mode->vsync_start - mode->vdisplay) |
> +		      VICH1VPSETR_VBP(mode->vtotal - mode->vsync_end);
> +
> +	vich1hssetr = VICH1HSSETR_HACTIVE(mode->hdisplay) |
> +		      VICH1HSSETR_HSA(mode->hsync_end - mode->hsync_start);
> +	vich1hssetr |= (mode->flags & DRM_MODE_FLAG_PHSYNC) ?
> +			VICH1HSSETR_HSPOL_HIGH : VICH1HSSETR_HSPOL_LOW;
> +
> +	vich1hpsetr = VICH1HPSETR_HFP(mode->hsync_start - mode->hdisplay) |
> +		      VICH1HPSETR_HBP(mode->htotal - mode->hsync_end);
> +
> +	rzg2l_mipi_dsi_link_write(dsi, VICH1VSSETR, vich1vssetr);
> +	rzg2l_mipi_dsi_link_write(dsi, VICH1VPSETR, vich1vpsetr);
> +	rzg2l_mipi_dsi_link_write(dsi, VICH1HSSETR, vich1hssetr);
> +	rzg2l_mipi_dsi_link_write(dsi, VICH1HPSETR, vich1hpsetr);
> +
> +	/*
> +	 * Configuration for Delay Value
> +	 * Delay value based on 2 ranges of video clock.
> +	 * 74.25MHz is videoclock of HD at 60p or FHD at 30p
> +	 */
> +	if (mode->clock > 74250) {
> +		delay[0] = 231;
> +		delay[1] = 216;
> +	} else {
> +		delay[0] = 220;
> +		delay[1] = 212;
> +	}
> +
> +	if (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
> +		index = 0;
> +	else
> +		index = 1;
> +
> +	rzg2l_mipi_dsi_link_write(dsi, VICH1SET1R,
> +				  VICH1SET1R_DLY(delay[index]));
> +}
> +
> +static int rzg2l_mipi_dsi_start_hs_clock(struct rzg2l_mipi_dsi *dsi)
> +{
> +	bool is_clk_cont;
> +	u32 hsclksetr;
> +	u32 status;
> +	int ret;
> +
> +	is_clk_cont = !(dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS);
> +
> +	/* Start HS clock */
> +	hsclksetr = HSCLKSETR_HSCLKRUN_HS | (is_clk_cont ?
> +					     HSCLKSETR_HSCLKMODE_CONT :
> +					     HSCLKSETR_HSCLKMODE_NON_CONT);
> +	rzg2l_mipi_dsi_link_write(dsi, HSCLKSETR, hsclksetr);
> +
> +	if (is_clk_cont) {
> +		ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status,
> +					status & PLSR_CLLP2HS,
> +					2000, 20000, false, dsi, PLSR);
> +		if (ret < 0) {
> +			dev_err(dsi->dev, "failed to start HS clock\n");
> +			return ret;
> +		}
> +	}
> +
> +	dev_dbg(dsi->dev, "Start High Speed Clock with %s clock mode",
> +		is_clk_cont ? "continuous" : "non-continuous");
> +
> +	return 0;
> +}
> +
> +static int rzg2l_mipi_dsi_stop_hs_clock(struct rzg2l_mipi_dsi *dsi)
> +{
> +	bool is_clk_cont;
> +	u32 status;
> +	int ret;
> +
> +	is_clk_cont = !(dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS);
> +
> +	/* Stop HS clock */
> +	rzg2l_mipi_dsi_link_write(dsi, HSCLKSETR,
> +				  is_clk_cont ? HSCLKSETR_HSCLKMODE_CONT :
> +				  HSCLKSETR_HSCLKMODE_NON_CONT);
> +
> +	if (is_clk_cont) {
> +		ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status,
> +					status & PLSR_CLHS2LP,
> +					2000, 20000, false, dsi, PLSR);
> +		if (ret < 0) {
> +			dev_err(dsi->dev, "failed to stop HS clock\n");
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int rzg2l_mipi_dsi_start_video(struct rzg2l_mipi_dsi *dsi)
> +{
> +	u32 vich1set0r;
> +	u32 status;
> +	int ret;
> +
> +	/* Configuration for Blanking sequence and start video input*/
> +	vich1set0r = VICH1SET0R_HFPNOLP | VICH1SET0R_HBPNOLP |
> +		     VICH1SET0R_HSANOLP | VICH1SET0R_VSTART;
> +	rzg2l_mipi_dsi_link_write(dsi, VICH1SET0R, vich1set0r);
> +
> +	ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status,
> +				status & VICH1SR_VIRDY,
> +				2000, 20000, false, dsi, VICH1SR);
> +	if (ret < 0)
> +		dev_err(dsi->dev, "Failed to start video signal input\n");
> +
> +	return ret;
> +}
> +
> +static int rzg2l_mipi_dsi_stop_video(struct rzg2l_mipi_dsi *dsi)
> +{
> +	u32 status;
> +	int ret;
> +
> +	rzg2l_mipi_dsi_link_write(dsi, VICH1SET0R, VICH1SET0R_VSTPAFT);
> +	ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status,
> +				(status & VICH1SR_STOP) && (!(status & VICH1SR_RUNNING)),
> +				2000, 20000, false, dsi, VICH1SR);
> +	if (ret < 0)
> +		goto err;
> +
> +	ret = read_poll_timeout(rzg2l_mipi_dsi_link_read, status,
> +				!(status & LINKSR_HSBUSY),
> +				2000, 20000, false, dsi, LINKSR);
> +	if (ret < 0)
> +		goto err;
> +
> +	return 0;
> +
> +err:
> +	dev_err(dsi->dev, "Failed to stop video signal input\n");
> +	return ret;
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Bridge
> + */
> +
> +static int rzg2l_mipi_dsi_attach(struct drm_bridge *bridge,
> +				 enum drm_bridge_attach_flags flags)
> +{
> +	struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge);
> +
> +	return drm_bridge_attach(bridge->encoder, dsi->next_bridge, bridge,
> +				 flags);
> +}
> +
> +static void rzg2l_mipi_dsi_atomic_enable(struct drm_bridge *bridge,
> +					 struct drm_bridge_state *old_bridge_state)
> +{
> +	struct drm_atomic_state *state = old_bridge_state->base.state;
> +	struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge);
> +	const struct drm_display_mode *mode;
> +	struct drm_connector *connector;
> +	struct drm_crtc *crtc;
> +	int ret;
> +
> +	connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
> +	crtc = drm_atomic_get_new_connector_state(state, connector)->crtc;
> +	mode = &drm_atomic_get_new_crtc_state(state, crtc)->adjusted_mode;
> +
> +	ret = rzg2l_mipi_dsi_startup(dsi, mode);
> +	if (ret < 0)
> +		return;
> +
> +	rzg2l_mipi_dsi_set_display_timing(dsi, mode);
> +
> +	ret = rzg2l_mipi_dsi_start_hs_clock(dsi);
> +	if (ret < 0)
> +		goto err_hs_clock;
> +
> +	ret = rzg2l_mipi_dsi_start_video(dsi);
> +	if (ret < 0)
> +		goto err_video;
> +
> +	return;
> +
> +err_video:
> +	rzg2l_mipi_dsi_stop_hs_clock(dsi);
> +err_hs_clock:
> +	reset_control_assert(dsi->rstc);
> +	pm_runtime_put(dsi->dev);

A function that wraps those two calls would be nice, you could call it
here and in rzg2l_mipi_dsi_atomic_disable(). It would be the counterpart
of rzg2l_mipi_dsi_startup(), the same way you have
rzg2l_mipi_dsi_start_hs_clock() vs. rzg2l_mipi_dsi_stop_hs_clock() and
rzg2l_mipi_dsi_stop_video() vs. rzg2l_mipi_dsi_start_video().

> +}
> +
> +static void rzg2l_mipi_dsi_atomic_disable(struct drm_bridge *bridge,
> +					  struct drm_bridge_state *old_bridge_state)
> +{
> +	struct rzg2l_mipi_dsi *dsi = bridge_to_rzg2l_mipi_dsi(bridge);
> +
> +	rzg2l_mipi_dsi_stop_video(dsi);
> +	rzg2l_mipi_dsi_stop_hs_clock(dsi);
> +	reset_control_assert(dsi->rstc);
> +	pm_runtime_put(dsi->dev);
> +}
> +
> +static enum drm_mode_status
> +rzg2l_mipi_dsi_bridge_mode_valid(struct drm_bridge *bridge,
> +				 const struct drm_display_info *info,
> +				 const struct drm_display_mode *mode)
> +{
> +	if (mode->clock > 148500)
> +		return MODE_CLOCK_HIGH;
> +
> +	return MODE_OK;
> +}
> +
> +static const struct drm_bridge_funcs rzg2l_mipi_dsi_bridge_ops = {
> +	.attach = rzg2l_mipi_dsi_attach,
> +	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> +	.atomic_reset = drm_atomic_helper_bridge_reset,
> +	.atomic_enable = rzg2l_mipi_dsi_atomic_enable,
> +	.atomic_disable = rzg2l_mipi_dsi_atomic_disable,
> +	.mode_valid = rzg2l_mipi_dsi_bridge_mode_valid,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Host setting
> + */
> +
> +static int rzg2l_mipi_dsi_host_attach(struct mipi_dsi_host *host,
> +				      struct mipi_dsi_device *device)
> +{
> +	struct rzg2l_mipi_dsi *dsi = host_to_rzg2l_mipi_dsi(host);
> +	int ret;
> +
> +	if (dsi->max_lanes < dsi->lanes || device->lanes > dsi->num_data_lanes) {
> +		dev_err(dsi->dev, "Invalid lanes");
> +		return -EINVAL;
> +	}
> +
> +	switch (mipi_dsi_pixel_format_to_bpp(device->format)) {
> +	case 24:
> +	case 18:
> +		break;
> +	default:
> +		dev_warn(dsi->dev, "unsupported format");
> +		return -EINVAL;
> +	}
> +
> +	dsi->lanes = device->lanes;
> +	dsi->format = device->format;
> +	dsi->mode_flags = device->mode_flags;
> +
> +	dsi->next_bridge = devm_drm_of_get_bridge(dsi->dev, dsi->dev->of_node,
> +						  1, 0);
> +	if (IS_ERR(dsi->next_bridge)) {
> +		ret = PTR_ERR(dsi->next_bridge);
> +		dev_err(dsi->dev, "failed to get next bridge: %d\n", ret);
> +		return ret;
> +	}
> +
> +	drm_bridge_add(&dsi->bridge);
> +
> +	return 0;
> +}
> +
> +static int rzg2l_mipi_dsi_host_detach(struct mipi_dsi_host *host,
> +				      struct mipi_dsi_device *device)
> +{
> +	struct rzg2l_mipi_dsi *dsi = host_to_rzg2l_mipi_dsi(host);
> +
> +	drm_bridge_remove(&dsi->bridge);
> +
> +	return 0;
> +}
> +
> +static const struct mipi_dsi_host_ops rzg2l_mipi_dsi_host_ops = {
> +	.attach = rzg2l_mipi_dsi_host_attach,
> +	.detach = rzg2l_mipi_dsi_host_detach,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Power Management
> + */
> +
> +static int __maybe_unused rzg2l_mipi_pm_runtime_suspend(struct device *dev)
> +{
> +	struct rzg2l_mipi_dsi *dsi = dev_get_drvdata(dev);
> +
> +	reset_control_assert(dsi->prstc);
> +	reset_control_assert(dsi->arstc);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused rzg2l_mipi_pm_runtime_resume(struct device *dev)
> +{
> +	struct rzg2l_mipi_dsi *dsi = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = reset_control_deassert(dsi->arstc);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = reset_control_deassert(dsi->prstc);
> +	if (ret < 0)
> +		reset_control_assert(dsi->arstc);
> +
> +	return ret;
> +}
> +
> +static const struct dev_pm_ops rzg2l_mipi_pm_ops = {
> +	SET_RUNTIME_PM_OPS(rzg2l_mipi_pm_runtime_suspend, rzg2l_mipi_pm_runtime_resume, NULL)
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Probe & Remove
> + */
> +
> +static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
> +{
> +	struct rzg2l_mipi_dsi *dsi;
> +	int ret;
> +
> +	dsi = devm_kzalloc(&pdev->dev, sizeof(*dsi), GFP_KERNEL);
> +	if (!dsi)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, dsi);
> +	dsi->dev = &pdev->dev;
> +
> +	ret = drm_of_get_data_lanes_count_ep(dsi->dev->of_node, 1, 0, 1, 4);
> +	if (ret < 0)
> +		return dev_err_probe(dsi->dev, ret,
> +				     "missing or invalid data-lanes property\n");
> +
> +	dsi->num_data_lanes = ret;

I would store this in a local num_data_lanes variable, and ...

> +
> +	dsi->mmio = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(dsi->mmio))
> +		return PTR_ERR(dsi->mmio);
> +
> +	dsi->vclk = devm_clk_get(dsi->dev, "vclk");
> +	if (IS_ERR(dsi->vclk))
> +		return PTR_ERR(dsi->vclk);
> +
> +	dsi->rstc = devm_reset_control_get_exclusive(dsi->dev, "rst");
> +	if (IS_ERR(dsi->rstc))
> +		return dev_err_probe(dsi->dev, PTR_ERR(dsi->rstc),
> +				     "failed to get rst\n");
> +
> +	dsi->arstc = devm_reset_control_get_exclusive(dsi->dev, "arst");
> +	if (IS_ERR(dsi->arstc))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(dsi->arstc),
> +				     "failed to get arst\n");
> +
> +	dsi->prstc = devm_reset_control_get_exclusive(dsi->dev, "prst");
> +	if (IS_ERR(dsi->prstc))
> +		return dev_err_probe(dsi->dev, PTR_ERR(dsi->prstc),
> +				     "failed to get prst\n");
> +
> +	platform_set_drvdata(pdev, dsi);
> +
> +	pm_runtime_enable(dsi->dev);
> +
> +	ret = pm_runtime_resume_and_get(dsi->dev);
> +	if (ret < 0)
> +		return ret;

This should be goto out_pm_get, and the label should be renamed to
out_pm_disable (or just out_pm). Error labels should be named according
to what cleanup operation they perform, not the error that they handle.
There are a few error labels above that should also be renamed
accordingly.

> +
> +	dsi->max_lanes = ((rzg2l_mipi_dsi_link_read(dsi, TXSETR) >> 16) & 0x3) + 1;

... here write

	dsi->max_lanes = min(((rzg2l_mipi_dsi_link_read(dsi, TXSETR) >> 16) & 3) + 1,
			     num_data_lanes);

to drop the num_data_lanes field from the rzg2l_mipi_dsi structure. You
could also use a local variable to store the register value in order to
shorten lines:

	txsetr = rzg2l_mipi_dsi_link_read(dsi, TXSETR);
	dsi->max_lanes = min(((txsetr >> 16) & 3) + 1, num_data_lanes);

Up to you.

All those changes are fairly small, once addressed,

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>

> +	pm_runtime_put(dsi->dev);
> +
> +	/* Initialize the DRM bridge. */
> +	dsi->bridge.funcs = &rzg2l_mipi_dsi_bridge_ops;
> +	dsi->bridge.of_node = dsi->dev->of_node;
> +
> +	/* Init host device */
> +	dsi->host.dev = dsi->dev;
> +	dsi->host.ops = &rzg2l_mipi_dsi_host_ops;
> +	ret = mipi_dsi_host_register(&dsi->host);
> +	if (ret < 0)
> +		goto out_pm_get;
> +
> +	return 0;
> +
> +out_pm_get:
> +	pm_runtime_disable(dsi->dev);
> +	return ret;
> +}
> +
> +static int rzg2l_mipi_dsi_remove(struct platform_device *pdev)
> +{
> +	struct rzg2l_mipi_dsi *dsi = platform_get_drvdata(pdev);
> +
> +	mipi_dsi_host_unregister(&dsi->host);
> +	pm_runtime_disable(&pdev->dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id rzg2l_mipi_dsi_of_table[] = {
> +	{ .compatible = "renesas,rzg2l-mipi-dsi" },
> +	{ /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(of, rzg2l_mipi_dsi_of_table);
> +
> +static struct platform_driver rzg2l_mipi_dsi_platform_driver = {
> +	.probe	= rzg2l_mipi_dsi_probe,
> +	.remove	= rzg2l_mipi_dsi_remove,
> +	.driver	= {
> +		.name = "rzg2l-mipi-dsi",
> +		.pm = &rzg2l_mipi_pm_ops,
> +		.of_match_table = rzg2l_mipi_dsi_of_table,
> +	},
> +};
> +
> +module_platform_driver(rzg2l_mipi_dsi_platform_driver);
> +
> +MODULE_AUTHOR("Biju Das <biju.das.jz at bp.renesas.com>");
> +MODULE_DESCRIPTION("Renesas RZ/G2L MIPI DSI Encoder Driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h b/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h
> new file mode 100644
> index 000000000000..1dbc16ec64a4
> --- /dev/null
> +++ b/drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h
> @@ -0,0 +1,151 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * RZ/G2L MIPI DSI Interface Registers Definitions
> + *
> + * Copyright (C) 2022 Renesas Electronics Corporation
> + */
> +
> +#ifndef __RZG2L_MIPI_DSI_REGS_H__
> +#define __RZG2L_MIPI_DSI_REGS_H__
> +
> +#include <linux/bits.h>
> +
> +/* DPHY Registers */
> +#define DSIDPHYCTRL0			0x00
> +#define DSIDPHYCTRL0_CAL_EN_HSRX_OFS	BIT(16)
> +#define DSIDPHYCTRL0_CMN_MASTER_EN	BIT(8)
> +#define DSIDPHYCTRL0_RE_VDD_DETVCCQLV18	BIT(2)
> +#define DSIDPHYCTRL0_EN_LDO1200		BIT(1)
> +#define DSIDPHYCTRL0_EN_BGR		BIT(0)
> +
> +#define DSIDPHYTIM0			0x04
> +#define DSIDPHYTIM0_TCLK_MISS(x)	((x) << 24)
> +#define DSIDPHYTIM0_T_INIT(x)		((x) << 0)
> +
> +#define DSIDPHYTIM1			0x08
> +#define DSIDPHYTIM1_THS_PREPARE(x)	((x) << 24)
> +#define DSIDPHYTIM1_TCLK_PREPARE(x)	((x) << 16)
> +#define DSIDPHYTIM1_THS_SETTLE(x)	((x) << 8)
> +#define DSIDPHYTIM1_TCLK_SETTLE(x)	((x) << 0)
> +
> +#define DSIDPHYTIM2			0x0c
> +#define DSIDPHYTIM2_TCLK_TRAIL(x)	((x) << 24)
> +#define DSIDPHYTIM2_TCLK_POST(x)	((x) << 16)
> +#define DSIDPHYTIM2_TCLK_PRE(x)		((x) << 8)
> +#define DSIDPHYTIM2_TCLK_ZERO(x)	((x) << 0)
> +
> +#define DSIDPHYTIM3			0x10
> +#define DSIDPHYTIM3_TLPX(x)		((x) << 24)
> +#define DSIDPHYTIM3_THS_EXIT(x)		((x) << 16)
> +#define DSIDPHYTIM3_THS_TRAIL(x)	((x) << 8)
> +#define DSIDPHYTIM3_THS_ZERO(x)		((x) << 0)
> +
> +/* --------------------------------------------------------*/
> +/* Link Registers */
> +#define LINK_REG_OFFSET			0x10000
> +
> +/* Link Status Register */
> +#define LINKSR				0x10
> +#define LINKSR_LPBUSY			BIT(13)
> +#define LINKSR_HSBUSY			BIT(12)
> +#define LINKSR_VICHRUN1			BIT(8)
> +#define LINKSR_SQCHRUN1			BIT(4)
> +#define LINKSR_SQCHRUN0			BIT(0)
> +
> +/* Tx Set Register */
> +#define TXSETR				0x100
> +#define TXSETR_NUMLANECAP		(0x3 << 16)
> +#define TXSETR_DLEN			(1 << 9)
> +#define TXSETR_CLEN			(1 << 8)
> +#define TXSETR_NUMLANEUSE(x)		(((x) & 0x3) << 0)
> +
> +/* HS Clock Set Register */
> +#define HSCLKSETR			0x104
> +#define HSCLKSETR_HSCLKMODE_CONT	(1 << 1)
> +#define HSCLKSETR_HSCLKMODE_NON_CONT	(0 << 1)
> +#define HSCLKSETR_HSCLKRUN_HS		(1 << 0)
> +#define HSCLKSETR_HSCLKRUN_LP		(0 << 0)
> +
> +/* Reset Control Register */
> +#define RSTCR				0x110
> +#define RSTCR_SWRST			BIT(0)
> +#define RSTCR_FCETXSTP			BIT(16)
> +
> +/* Reset Status Register */
> +#define RSTSR				0x114
> +#define RSTSR_DL0DIR			(1 << 15)
> +#define RSTSR_DLSTPST			(0xf << 8)
> +#define RSTSR_SWRSTV1			(1 << 4)
> +#define RSTSR_SWRSTIB			(1 << 3)
> +#define RSTSR_SWRSTAPB			(1 << 2)
> +#define RSTSR_SWRSTLP			(1 << 1)
> +#define RSTSR_SWRSTHS			(1 << 0)
> +
> +/* Clock Lane Stop Time Set Register */
> +#define CLSTPTSETR			0x314
> +#define CLSTPTSETR_CLKKPT(x)		((x) << 24)
> +#define CLSTPTSETR_CLKBFHT(x)		((x) << 16)
> +#define CLSTPTSETR_CLKSTPT(x)		((x) << 2)
> +
> +/* LP Transition Time Set Register */
> +#define LPTRNSTSETR			0x318
> +#define LPTRNSTSETR_GOLPBKT(x)		((x) << 0)
> +
> +/* Physical Lane Status Register */
> +#define PLSR				0x320
> +#define PLSR_CLHS2LP			BIT(27)
> +#define PLSR_CLLP2HS			BIT(26)
> +
> +/* Video-Input Channel 1 Set 0 Register */
> +#define VICH1SET0R			0x400
> +#define VICH1SET0R_VSEN			BIT(12)
> +#define VICH1SET0R_HFPNOLP		BIT(10)
> +#define VICH1SET0R_HBPNOLP		BIT(9)
> +#define VICH1SET0R_HSANOLP		BIT(8)
> +#define VICH1SET0R_VSTPAFT		BIT(1)
> +#define VICH1SET0R_VSTART		BIT(0)
> +
> +/* Video-Input Channel 1 Set 1 Register */
> +#define VICH1SET1R			0x404
> +#define VICH1SET1R_DLY(x)		(((x) & 0xfff) << 2)
> +
> +/* Video-Input Channel 1 Status Register */
> +#define VICH1SR				0x410
> +#define VICH1SR_VIRDY			BIT(3)
> +#define VICH1SR_RUNNING			BIT(2)
> +#define VICH1SR_STOP			BIT(1)
> +#define VICH1SR_START			BIT(0)
> +
> +/* Video-Input Channel 1 Pixel Packet Set Register */
> +#define VICH1PPSETR			0x420
> +#define VICH1PPSETR_DT_RGB18		(0x1e << 16)
> +#define VICH1PPSETR_DT_RGB18_LS		(0x2e << 16)
> +#define VICH1PPSETR_DT_RGB24		(0x3e << 16)
> +#define VICH1PPSETR_TXESYNC_PULSE	(1 << 15)
> +#define VICH1PPSETR_VC(x)		((x) << 22)
> +
> +/* Video-Input Channel 1 Vertical Size Set Register */
> +#define VICH1VSSETR			0x428
> +#define VICH1VSSETR_VACTIVE(x)		(((x) & 0x7fff) << 16)
> +#define VICH1VSSETR_VSPOL_LOW		(1 << 15)
> +#define VICH1VSSETR_VSPOL_HIGH		(0 << 15)
> +#define VICH1VSSETR_VSA(x)		(((x) & 0xfff) << 0)
> +
> +/* Video-Input Channel 1 Vertical Porch Set Register */
> +#define VICH1VPSETR			0x42c
> +#define VICH1VPSETR_VFP(x)		(((x) & 0x1fff) << 16)
> +#define VICH1VPSETR_VBP(x)		(((x) & 0x1fff) << 0)
> +
> +/* Video-Input Channel 1 Horizontal Size Set Register */
> +#define VICH1HSSETR			0x430
> +#define VICH1HSSETR_HACTIVE(x)		(((x) & 0x7fff) << 16)
> +#define VICH1HSSETR_HSPOL_LOW		(1 << 15)
> +#define VICH1HSSETR_HSPOL_HIGH		(0 << 15)
> +#define VICH1HSSETR_HSA(x)		(((x) & 0xfff) << 0)
> +
> +/* Video-Input Channel 1 Horizontal Porch Set Register */
> +#define VICH1HPSETR			0x434
> +#define VICH1HPSETR_HFP(x)		(((x) & 0x1fff) << 16)
> +#define VICH1HPSETR_HBP(x)		(((x) & 0x1fff) << 0)
> +
> +#endif /* __RZG2L_MIPI_DSI_REGS_H__ */

-- 
Regards,

Laurent Pinchart


More information about the dri-devel mailing list