[PATCH v3 04/11] drm/i915/mtl: Define engine context layouts

Radhakrishna Sripada radhakrishna.sripada at intel.com
Wed Aug 31 21:49:51 UTC 2022


From: Matt Roper <matthew.d.roper at intel.com>

The part of the media and blitter engine contexts that we care about for
setting up an initial state are the same on MTL as they were on DG2
(and PVC), so we need to update the driver conditions to re-use the DG2
context table.

For render/compute engines, the part of the context images are nearly
the same, although the layout had a very slight change --- one POSH
register was removed and the placement of some LRI/noops adjusted
slightly to compensate.

v2:
 - Dg2, mtl xcs offsets slightly vary. Use a seperate offsets array(Bala)
 - Drop unused registers in mtl rcs offsets.(Bala)

Bspec: 46261, 46260, 45585
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan at intel.com>
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada at intel.com>
---
 drivers/gpu/drm/i915/gt/intel_lrc.c | 81 ++++++++++++++++++++++++++++-
 1 file changed, 79 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.c b/drivers/gpu/drm/i915/gt/intel_lrc.c
index 070cec4ff8a4..ecb030ee39cd 100644
--- a/drivers/gpu/drm/i915/gt/intel_lrc.c
+++ b/drivers/gpu/drm/i915/gt/intel_lrc.c
@@ -264,6 +264,38 @@ static const u8 dg2_xcs_offsets[] = {
 	END
 };
 
+static const u8 mtl_xcs_offsets[] = {
+	NOP(1),
+	LRI(13, POSTED),
+	REG16(0x244),
+	REG(0x034),
+	REG(0x030),
+	REG(0x038),
+	REG(0x03c),
+	REG(0x168),
+	REG(0x140),
+	REG(0x110),
+	REG(0x1c0),
+	REG(0x1c4),
+	REG(0x1c8),
+	REG(0x180),
+	REG16(0x2b4),
+
+	NOP(1),
+	LRI(9, POSTED),
+	REG16(0x3a8),
+	REG16(0x28c),
+	REG16(0x288),
+	REG16(0x284),
+	REG16(0x280),
+	REG16(0x27c),
+	REG16(0x278),
+	REG16(0x274),
+	REG16(0x270),
+
+	END
+};
+
 static const u8 gen8_rcs_offsets[] = {
 	NOP(1),
 	LRI(14, POSTED),
@@ -606,6 +638,47 @@ static const u8 dg2_rcs_offsets[] = {
 	END
 };
 
+static const u8 mtl_rcs_offsets[] = {
+       NOP(1),
+       LRI(13, POSTED),
+       REG16(0x244),
+       REG(0x034),
+       REG(0x030),
+       REG(0x038),
+       REG(0x03c),
+       REG(0x168),
+       REG(0x140),
+       REG(0x110),
+       REG(0x1c0),
+       REG(0x1c4),
+       REG(0x1c8),
+       REG(0x180),
+       REG16(0x2b4),
+
+       NOP(1),
+       LRI(9, POSTED),
+       REG16(0x3a8),
+       REG16(0x28c),
+       REG16(0x288),
+       REG16(0x284),
+       REG16(0x280),
+       REG16(0x27c),
+       REG16(0x278),
+       REG16(0x274),
+       REG16(0x270),
+
+       NOP(2),
+       LRI(2, POSTED),
+       REG16(0x5a8),
+       REG16(0x5ac),
+
+       NOP(6),
+       LRI(1, 0),
+       REG(0x0c8),
+
+       END
+};
+
 #undef END
 #undef REG16
 #undef REG
@@ -624,7 +697,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine)
 		   !intel_engine_has_relative_mmio(engine));
 
 	if (engine->flags & I915_ENGINE_HAS_RCS_REG_STATE) {
-		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55))
+		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 70))
+			return mtl_rcs_offsets;
+		else if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55))
 			return dg2_rcs_offsets;
 		else if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
 			return xehp_rcs_offsets;
@@ -637,7 +712,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine)
 		else
 			return gen8_rcs_offsets;
 	} else {
-		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55))
+		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 70))
+			return mtl_xcs_offsets;
+		else if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55))
 			return dg2_xcs_offsets;
 		else if (GRAPHICS_VER(engine->i915) >= 12)
 			return gen12_xcs_offsets;
-- 
2.25.1



More information about the dri-devel mailing list