[PATCH v6 1/4] arm64: dts: qcom: add data-lanes and link-freuencies into dp_out endpoint

[Kuogee Hsieh]

On 11/30/2022 4:21 PM, Dmitry Baryshkov wrote:
> On 01/12/2022 02:07, Dmitry Baryshkov wrote:
>> On 01/12/2022 01:51, Kuogee Hsieh wrote:
>>> Move data-lanes property from mdss_dp node to dp_out endpoint. Also
>>> add link-frequencies property into dp_out endpoint as well. The last
>>> frequency specified at link-frequencies will be the max link rate
>>> supported by DP.
>>>
>>> Changes in v5:
>>> -- revert changes at sc7180.dtsi and sc7280.dtsi
>>> -- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi
>>>
>>> Changes in v6:
>>> -- add data-lanes and link-frequencies to yaml
>>>
>>> Signed-off-by: Kuogee Hsieh <quic_khsieh at quicinc.com>
>>> ---
>>>   .../devicetree/bindings/display/msm/dp-controller.yaml  | 17 
>>> +++++++++++++++++
>>
>> Separate patch. Also you didn't check the get_maintainers output, so 
>> required parties were not included into the distribution.
>>
>> Also as you'd check the get_maintainers output, please fix other 
>> email addresses too.
>>
>>> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi            |  6 +++++-
>>>   arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi          |  6 +++++-
>>>   3 files changed, 27 insertions(+), 2 deletions(-)
>>>
>>> diff --git 
>>> a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml 
>>> b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>> index 94bc6e1..af70343 100644
>>> --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>> +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
>>> @@ -90,6 +90,20 @@ properties:
>>>           $ref: /schemas/graph.yaml#/properties/port
>>>           description: Output endpoint of the controller
>>> +        properties:
>>> +          endpoint:
>>> +            $ref: /schemas/media/video-interfaces.yaml#
>>> +
>>> +          properties:
>>> +            link-frequencies: true
>>> +            data-lanes: true
>>
>> No. Use $ref for both of them.
>>
>>> +
>>> +          required:
>>> +            - link-frequencies
>>> +            - data-lanes
>>
>> No, they are not required.
>>
>>> +
>>> +          additionalProperties: false
>>> +
>>
>> deprecation of old data-lanes property?
>>
>>>   required:
>>>     - compatible
>>>     - reg
>>> @@ -158,6 +172,9 @@ examples:
>>>                   reg = <1>;
>>>                   endpoint {
>>>                       remote-endpoint = <&typec>;
>>> +                    data-lanes = <1 2>;
>>> +                    link-frequencies = /bits/ 64 <160000000 270000000
>
> s/1600/1620
>
>>> + 540000000 810000000>;
>>
>> I guess the number of zeroes is wrong here. This is 160 MHz ... 810 
>> Mhz, rather than 1.6 GHz ... 8.1 GHz
>
> Ok, I was wrong here. The old code definitely defaults to 570 
> mega-something. Now I'd really like to read your description for the 
> link-frequencies property, because the 
> phy_configure_opts_dp::link_rate is clearly specified in Mb/s and it 
> takes a fixed set of values from 1.62 Gb/s up to 8.1 Gb/s.
>
> I think the drm_dp_bw_code_to_link_rate() function is incorrect by 
> itself, as it multiplies with 27000 (27 Mbps) rather than 270000 (0.27 
> Gbps) as required by the standard. So first, we should fix the 
> function, then all the rates would become logical.

no, drm_dp_bw_code_to_link_rate() is correct and should not be changes 
since it impact to other dp drivers too.

0.27Gbps/lane is specified at DP spec.

DP use 8b/10b coding rule (10 bits symbol contains 8 bits data).


>
>
>>
>>>                   };
>>>               };
>>>           };
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi 
>>> b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>>> index 754d2d6..39f0844 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>>> @@ -812,7 +812,11 @@ hp_i2c: &i2c9 {
>>>       status = "okay";
>>>       pinctrl-names = "default";
>>>       pinctrl-0 = <&dp_hot_plug_det>;
>>> -    data-lanes = <0 1>;
>>> +};
>>> +
>>> +&dp_out {
>>> +    data-lanes = <0  1>;
>>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000>;
>>
>> Same comment here.
>>
>>>   };
>>>   &pm6150_adc {
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi 
>>> b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>>> index 93e39fc..b7c343d 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
>>> @@ -440,7 +440,11 @@ ap_i2c_tpm: &i2c14 {
>>>       status = "okay";
>>>       pinctrl-names = "default";
>>>       pinctrl-0 = <&dp_hot_plug_det>;
>>> -    data-lanes = <0 1>;
>>> +};
>>> +
>>> +&dp_out {
>>> +    data-lanes = <0  1>;
>>> +    link-frequencies = /bits/ 64 <160000000 270000000 540000000 
>>> 810000000>;
>>
>> And here.
>>
>>>   };
>>>   &mdss_mdp {
>>
>