[PATCH 04/15] drm/vc4: hvs: Correct interrupt masking bit assignment for HVS5

Maxime Ripard maxime at cerno.tech
Wed Dec 7 11:53:15 UTC 2022


From: Dave Stevenson <dave.stevenson at raspberrypi.com>

HVS5 has moved the interrupt enable bits around within the
DISPCTRL register, therefore the configuration has to be updated
to account for this.

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hvs.c  | 52 +++++++++++++++++++++++++++++-------------
 drivers/gpu/drm/vc4/vc4_regs.h | 10 ++++++--
 2 files changed, 44 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index 57d99e7199ee..d9fc0d03023b 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -660,7 +660,8 @@ void vc4_hvs_mask_underrun(struct vc4_hvs *hvs, int channel)
 		return;
 
 	dispctrl = HVS_READ(SCALER_DISPCTRL);
-	dispctrl &= ~SCALER_DISPCTRL_DSPEISLUR(channel);
+	dispctrl &= ~(hvs->vc4->is_vc5 ? SCALER5_DISPCTRL_DSPEISLUR(channel) :
+					 SCALER_DISPCTRL_DSPEISLUR(channel));
 
 	HVS_WRITE(SCALER_DISPCTRL, dispctrl);
 
@@ -677,7 +678,8 @@ void vc4_hvs_unmask_underrun(struct vc4_hvs *hvs, int channel)
 		return;
 
 	dispctrl = HVS_READ(SCALER_DISPCTRL);
-	dispctrl |= SCALER_DISPCTRL_DSPEISLUR(channel);
+	dispctrl |= (hvs->vc4->is_vc5 ? SCALER5_DISPCTRL_DSPEISLUR(channel) :
+					SCALER_DISPCTRL_DSPEISLUR(channel));
 
 	HVS_WRITE(SCALER_DISPSTAT,
 		  SCALER_DISPSTAT_EUFLOW(channel));
@@ -703,6 +705,7 @@ static irqreturn_t vc4_hvs_irq_handler(int irq, void *data)
 	int channel;
 	u32 control;
 	u32 status;
+	u32 dspeislur;
 
 	/*
 	 * NOTE: We don't need to protect the register access using
@@ -719,9 +722,11 @@ static irqreturn_t vc4_hvs_irq_handler(int irq, void *data)
 	control = HVS_READ(SCALER_DISPCTRL);
 
 	for (channel = 0; channel < SCALER_CHANNELS_COUNT; channel++) {
+		dspeislur = vc4->is_vc5 ? SCALER5_DISPCTRL_DSPEISLUR(channel) :
+					  SCALER_DISPCTRL_DSPEISLUR(channel);
 		/* Interrupt masking is not always honored, so check it here. */
 		if (status & SCALER_DISPSTAT_EUFLOW(channel) &&
-		    control & SCALER_DISPCTRL_DSPEISLUR(channel)) {
+		    control & dspeislur) {
 			vc4_hvs_mask_underrun(hvs, channel);
 			vc4_hvs_report_underrun(dev);
 
@@ -898,19 +903,34 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
 		    SCALER_DISPCTRL_DISPEIRQ(1) |
 		    SCALER_DISPCTRL_DISPEIRQ(2);
 
-	dispctrl &= ~(SCALER_DISPCTRL_DMAEIRQ |
-		      SCALER_DISPCTRL_SLVWREIRQ |
-		      SCALER_DISPCTRL_SLVRDEIRQ |
-		      SCALER_DISPCTRL_DSPEIEOF(0) |
-		      SCALER_DISPCTRL_DSPEIEOF(1) |
-		      SCALER_DISPCTRL_DSPEIEOF(2) |
-		      SCALER_DISPCTRL_DSPEIEOLN(0) |
-		      SCALER_DISPCTRL_DSPEIEOLN(1) |
-		      SCALER_DISPCTRL_DSPEIEOLN(2) |
-		      SCALER_DISPCTRL_DSPEISLUR(0) |
-		      SCALER_DISPCTRL_DSPEISLUR(1) |
-		      SCALER_DISPCTRL_DSPEISLUR(2) |
-		      SCALER_DISPCTRL_SCLEIRQ);
+	if (!vc4->is_vc5)
+		dispctrl &= ~(SCALER_DISPCTRL_DMAEIRQ |
+			      SCALER_DISPCTRL_SLVWREIRQ |
+			      SCALER_DISPCTRL_SLVRDEIRQ |
+			      SCALER_DISPCTRL_DSPEIEOF(0) |
+			      SCALER_DISPCTRL_DSPEIEOF(1) |
+			      SCALER_DISPCTRL_DSPEIEOF(2) |
+			      SCALER_DISPCTRL_DSPEIEOLN(0) |
+			      SCALER_DISPCTRL_DSPEIEOLN(1) |
+			      SCALER_DISPCTRL_DSPEIEOLN(2) |
+			      SCALER_DISPCTRL_DSPEISLUR(0) |
+			      SCALER_DISPCTRL_DSPEISLUR(1) |
+			      SCALER_DISPCTRL_DSPEISLUR(2) |
+			      SCALER_DISPCTRL_SCLEIRQ);
+	else
+		dispctrl &= ~(SCALER_DISPCTRL_DMAEIRQ |
+			      SCALER5_DISPCTRL_SLVEIRQ |
+			      SCALER5_DISPCTRL_DSPEIEOF(0) |
+			      SCALER5_DISPCTRL_DSPEIEOF(1) |
+			      SCALER5_DISPCTRL_DSPEIEOF(2) |
+			      SCALER5_DISPCTRL_DSPEIEOLN(0) |
+			      SCALER5_DISPCTRL_DSPEIEOLN(1) |
+			      SCALER5_DISPCTRL_DSPEIEOLN(2) |
+			      SCALER5_DISPCTRL_DSPEISLUR(0) |
+			      SCALER5_DISPCTRL_DSPEISLUR(1) |
+			      SCALER5_DISPCTRL_DSPEISLUR(2) |
+			      SCALER_DISPCTRL_SCLEIRQ);
+
 
 	/* Set AXI panic mode.
 	 * VC4 panics when < 2 lines in FIFO.
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 95deacdc31e7..1256f0877ff6 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -234,15 +234,21 @@
  * always enabled.
  */
 # define SCALER_DISPCTRL_DSPEISLUR(x)		BIT(13 + (x))
+# define SCALER5_DISPCTRL_DSPEISLUR(x)		BIT(9 + ((x) * 4))
 /* Enables Display 0 end-of-line-N contribution to
  * SCALER_DISPSTAT_IRQDISP0
  */
 # define SCALER_DISPCTRL_DSPEIEOLN(x)		BIT(8 + ((x) * 2))
+# define SCALER5_DISPCTRL_DSPEIEOLN(x)		BIT(8 + ((x) * 4))
 /* Enables Display 0 EOF contribution to SCALER_DISPSTAT_IRQDISP0 */
 # define SCALER_DISPCTRL_DSPEIEOF(x)		BIT(7 + ((x) * 2))
+# define SCALER5_DISPCTRL_DSPEIEOF(x)		BIT(7 + ((x) * 4))
 
-# define SCALER_DISPCTRL_SLVRDEIRQ		BIT(6)
-# define SCALER_DISPCTRL_SLVWREIRQ		BIT(5)
+# define SCALER5_DISPCTRL_DSPEIVST(x)		BIT(6 + ((x) * 4))
+
+# define SCALER_DISPCTRL_SLVRDEIRQ		BIT(6)	/* HVS4 only */
+# define SCALER_DISPCTRL_SLVWREIRQ		BIT(5)	/* HVS4 only */
+# define SCALER5_DISPCTRL_SLVEIRQ		BIT(5)
 # define SCALER_DISPCTRL_DMAEIRQ		BIT(4)
 /* Enables interrupt generation on the enabled EOF/EOLN/EISLUR
  * bits and short frames..

-- 
2.38.1


More information about the dri-devel mailing list