[PATCH 1/2] dt-bindings: drm/bridge: ti-sn65dsi83: Add enable delay property

[Alexander Stein]

It takes some time until the enable GPIO has settled when turning on.
This delay is platform specific and may be caused by e.g. voltage
shifts, capacitors etc.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 .../devicetree/bindings/display/bridge/ti,sn65dsi83.yaml      | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
index 48a97bb3e2e0d..3f50d497cf8ac 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -32,6 +32,10 @@ properties:
     maxItems: 1
     description: GPIO specifier for bridge_en pin (active high).
 
+  ti,enable-delay-us:
+    default: 10000
+    description: Enable time delay for enable-gpios
+
   vcc-supply:
     description: A 1.8V power supply (see regulator/regulator.yaml).
 
-- 
2.34.1