[PATCH v9 00/18] drm: bridge: Add Samsung MIPI DSIM bridge

[Jagan Teki]

On Fri, Dec 9, 2022 at 8:54 PM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> This series supports common bridge support for Samsung MIPI DSIM
> which is used in Exynos and i.MX8MM SoC's.
>
> The final bridge supports both the Exynos and i.MX8M Mini/Nano/Plus.
>
> Changes for v9:
> - rebase on drm-misc-next
> - drop drm bridge attach fix for Exynos
> - added prepare_prev_first flag
> - added pre_enable_prev_first flag
> - fix bridge chain order for exynos
> - added fix for Exynos host init for first DSI transfer
> - added MEDIA_BUS_FMT_FIXED
> - return MEDIA_BUS_FMT_RGB888_1X24 output_fmt if supported output_fmt
>   list is unsupported.
> - added MEDIA_BUS_FMT_YUYV10_1X20
> - added MEDIA_BUS_FMT_YUYV12_1X24
>
> Changes for v8:
> * fixed comment lines
> * fixed commit messages
> * fixed video mode bits
> * collect Marek Ack
> * fixed video mode bit names
> * update input formats logic
> * added imx8mplus support
>
> Changes for v7:
> * fix the drm bridge attach chain for exynos drm dsi driver
> * fix the hw_type checking logic
>
> Changes for v6:
> * handle previous bridge for exynos dsi while attaching bridge
>
> Changes for v5:
> * bridge changes to support multi-arch
> * updated and clear commit messages
> * add hw_type via plat data
> * removed unneeded quirk
> * rebased on linux-next
> t
> Changes for v4:
> * include Inki Dae in MAINTAINERS
> * remove dsi_driver probe in exynos_drm_drv to support multi-arch build
> * update init handling to ensure host init done on first cmd transfer
>
> Changes for v3:
> * fix the mult-arch build
> * fix dsi host init
> * updated commit messages
>
> Changes for v2:
> * fix bridge handling
> * fix dsi host init
> * correct the commit messages
>
> Tested in Engicam i.Core MX8M Mini SoM.
>
> Repo:
> https://gitlab.com/openedev/kernel/-/commits/imx8mm-dsi-v9
>
> v8:
> https://lore.kernel.org/all/20221110183853.3678209-1-jagan@amarulasolutions.com/
>
> Any inputs?
> Jagan.
>
> Jagan Teki (16):
>   drm: panel: Enable prepare_prev_first flag for samsung-s6e panels
>   drm: exynos: dsi: Fix MIPI_DSI*_NO_* mode flags
>   drm: exynos: dsi: Properly name HSA/HBP/HFP/HSE bits
>   drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge
>   drm: bridge: samsung-dsim: Lookup OF-graph or Child node devices
>   drm: bridge: samsung-dsim: Mark PHY as optional
>   drm: bridge: samsung-dsim: Add host init in pre_enable
>   drm: bridge: samsung-dsim: Init exynos host for first DSI transfer
>   drm: bridge: samsung-dsim: Add atomic_check
>   drm: bridge: samsung-dsim: Add platform PLL_P (PMS_P) offset
>   drm: bridge: samsung-dsim: Add atomic_get_input_bus_fmts
>   drm: bridge: samsung-dsim: Add input_bus_flags
>   dt-bindings: display: exynos: dsim: Add NXP i.MX8M Mini/Nano support
>   drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support
>   dt-bindings: display: exynos: dsim: Add NXP i.MX8M Plus support
>   drm: bridge: samsung-dsim: Add i.MX8M Plus support
>
> Marek Szyprowski (2):
>   drm/bridge: tc358764: Enable pre_enable_prev_first flag
>   drm: exynos: dsi: Restore proper bridge chain order

Can someone apply 1 to 5 patches, so I can send the following version
with DSIM conversion?

Jagan.