[v10] drm/msm/disp/dpu1: add support for dspp sub block flush in sc7280
Kalyan Thota
kalyant at qti.qualcomm.com
Mon Dec 12 11:35:15 UTC 2022
>-----Original Message-----
>From: Marijn Suijten <marijn.suijten at somainline.org>
>Sent: Wednesday, December 7, 2022 7:39 PM
>To: Kalyan Thota (QUIC) <quic_kalyant at quicinc.com>
>Cc: dri-devel at lists.freedesktop.org; linux-arm-msm at vger.kernel.org;
>freedreno at lists.freedesktop.org; devicetree at vger.kernel.org; linux-
>kernel at vger.kernel.org; robdclark at chromium.org; dianders at chromium.org;
>swboyd at chromium.org; Vinod Polimera (QUIC) <quic_vpolimer at quicinc.com>;
>dmitry.baryshkov at linaro.org; Abhinav Kumar (QUIC)
><quic_abhinavk at quicinc.com>
>Subject: Re: [v10] drm/msm/disp/dpu1: add support for dspp sub block flush in
>sc7280
>
>WARNING: This email originated from outside of Qualcomm. Please be wary of
>any links or attachments, and do not enable macros.
>
>On 2022-12-07 04:59:23, Kalyan Thota wrote:
>> Flush mechanism for DSPP blocks has changed in sc7280 family, it
>> allows individual sub blocks to be flushed in coordination with master
>> flush control.
>>
>> Representation: master_flush && (PCC_flush | IGC_flush .. etc )
>>
>> This change adds necessary support for the above design.
>>
>> Changes in v1:
>> - Few nits (Doug, Dmitry)
>> - Restrict sub-block flush programming to dpu_hw_ctl file (Dmitry)
>>
>> Changes in v2:
>> - Move the address offset to flush macro (Dmitry)
>> - Seperate ops for the sub block flush (Dmitry)
>>
>> Changes in v3:
>> - Reuse the DPU_DSPP_xx enum instead of a new one (Dmitry)
>>
>> Changes in v4:
>> - Use shorter version for unsigned int (Stephen)
>>
>> Changes in v5:
>> - Spurious patch please ignore.
>>
>> Changes in v6:
>> - Add SOB tag (Doug, Dmitry)
>>
>> Changes in v7:
>> - Cache flush mask per dspp (Dmitry)
>> - Few nits (Marijn)
>>
>> Changes in v8:
>> - Few nits (Marijn)
>>
>> Changes in v9:
>> - use DSPP enum while accessing flush mask to make it readable
>> (Dmitry)
>> - Few nits (Dmitry)
>>
>> Changes in v10:
>> - fix white spaces in a seperate patch (Dmitry)
>>
>> Signed-off-by: Kalyan Thota <quic_kalyant at quicinc.com>
>> ---
>> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 2 +-
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 5 ++-
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 4 +++
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 44
>++++++++++++++++++++++++--
>> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 5 ++-
>> 5 files changed, 55 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>> index 601d687..4170fbe 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>> @@ -766,7 +766,7 @@ static void _dpu_crtc_setup_cp_blocks(struct
>> drm_crtc *crtc)
>>
>> /* stage config flush mask */
>> ctl->ops.update_pending_flush_dspp(ctl,
>> - mixer[i].hw_dspp->idx);
>> + mixer[i].hw_dspp->idx, DPU_DSPP_PCC);
>> }
>> }
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> index 27f029f..0eecb2f 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
>> @@ -65,7 +65,10 @@
>> (PINGPONG_SDM845_MASK | BIT(DPU_PINGPONG_TE2))
>>
>> #define CTL_SC7280_MASK \
>> - (BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) |
>BIT(DPU_CTL_VM_CFG))
>> + (BIT(DPU_CTL_ACTIVE_CFG) | \
>> + BIT(DPU_CTL_FETCH_ACTIVE) | \
>> + BIT(DPU_CTL_VM_CFG) | \
>> + BIT(DPU_CTL_DSPP_SUB_BLOCK_FLUSH))
>>
>> #define MERGE_3D_SM8150_MASK (0)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> index 38aa38a..126ee37 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
>> @@ -161,10 +161,12 @@ enum {
>> * DSPP sub-blocks
>> * @DPU_DSPP_PCC Panel color correction block
>> * @DPU_DSPP_GC Gamma correction block
>> + * @DPU_DSPP_IGC Inverse gamma correction block
>> */
>> enum {
>> DPU_DSPP_PCC = 0x1,
>> DPU_DSPP_GC,
>> + DPU_DSPP_IGC,
>> DPU_DSPP_MAX
>> };
>>
>> @@ -191,6 +193,7 @@ enum {
>> * @DPU_CTL_SPLIT_DISPLAY: CTL supports video mode split display
>> * @DPU_CTL_FETCH_ACTIVE: Active CTL for fetch HW (SSPPs)
>> * @DPU_CTL_VM_CFG: CTL config to support multiple VMs
>> + * @DPU_CTL_DSPP_BLOCK_FLUSH CTL config to support dspp sub-block
>> + flush
>
>The above uses tabs, why does this use spaces?
>
>> * @DPU_CTL_MAX
>> */
>> enum {
>> @@ -198,6 +201,7 @@ enum {
>> DPU_CTL_ACTIVE_CFG,
>> DPU_CTL_FETCH_ACTIVE,
>> DPU_CTL_VM_CFG,
>> + DPU_CTL_DSPP_SUB_BLOCK_FLUSH,
>> DPU_CTL_MAX
>> };
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
>> index a35ecb6..e801be1 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
>> @@ -33,6 +33,7 @@
>> #define CTL_INTF_FLUSH 0x110
>> #define CTL_INTF_MASTER 0x134
>> #define CTL_FETCH_PIPE_ACTIVE 0x0FC
>> +#define CTL_DSPP_n_FLUSH(n) ((0x13C) + ((n) * 4))
>>
>> #define CTL_MIXER_BORDER_OUT BIT(24)
>> #define CTL_FLUSH_MASK_CTL BIT(17)
>> @@ -113,6 +114,9 @@ static inline void
>dpu_hw_ctl_clear_pending_flush(struct dpu_hw_ctl *ctx)
>> trace_dpu_hw_ctl_clear_pending_flush(ctx->pending_flush_mask,
>> dpu_hw_ctl_get_flush_register(ctx));
>> ctx->pending_flush_mask = 0x0;
>> +
>> + memset(ctx->pending_dspp_flush_mask, 0,
>> + sizeof(ctx->pending_dspp_flush_mask));
>> }
>>
>> static inline void dpu_hw_ctl_update_pending_flush(struct dpu_hw_ctl
>> *ctx, @@ -130,6 +134,8 @@ static u32
>> dpu_hw_ctl_get_pending_flush(struct dpu_hw_ctl *ctx)
>>
>> static inline void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl
>> *ctx) {
>> + int dspp;
>> +
>> if (ctx->pending_flush_mask & BIT(MERGE_3D_IDX))
>> DPU_REG_WRITE(&ctx->hw, CTL_MERGE_3D_FLUSH,
>> ctx->pending_merge_3d_flush_mask);
>> @@ -140,6 +146,11 @@ static inline void dpu_hw_ctl_trigger_flush_v1(struct
>dpu_hw_ctl *ctx)
>> DPU_REG_WRITE(&ctx->hw, CTL_WB_FLUSH,
>> ctx->pending_wb_flush_mask);
>>
>> + for(dspp = DSPP_0; dspp < DSPP_MAX; dspp++)
>
>Space between for and (?
>
>> + if (ctx->pending_dspp_flush_mask[dspp - DSPP_0])
>> + DPU_REG_WRITE(&ctx->hw, CTL_DSPP_n_FLUSH(dspp - DSPP_0),
>> + ctx->pending_dspp_flush_mask[dspp -
>> + DSPP_0]);
>
>Shouldn't this loop as a whole check if _any_ DSPP flush is requested via
>`pending_flush_mask & BIT(29)`? The other flushes don't check the per-block
>mask value either (and could write zero that way) but only base this check on the
>presence of a global flush mask for that block.
>
BIT(29) enables dspp flush only from DPU rev 7.x.x where hierarchal flush is introduced. For other targets that supports CTL_ACTIVE, it's a NOP.
With the check "pending_flush_mask & BIT(29)", unintended DSPP registers for that CTL path will be programmed to "0" which is not correct IMO.
Secondly "pending_flush_mask & BIT(29)" although will not be true for DPU 6.x.x versions but can be confusing w.r.t code readability.
Let me know your thoughts.
>> +
>> DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, ctx->pending_flush_mask); }
>>
>> @@ -287,8 +298,9 @@ static void
>> dpu_hw_ctl_update_pending_flush_merge_3d_v1(struct dpu_hw_ctl *ctx, }
>>
>> static void dpu_hw_ctl_update_pending_flush_dspp(struct dpu_hw_ctl *ctx,
>> - enum dpu_dspp dspp)
>> + enum dpu_dspp dspp, u32 dspp_sub_blk)
>> {
>> +
>
>Empty line needed for?
>
>> switch (dspp) {
>> case DSPP_0:
>> ctx->pending_flush_mask |= BIT(13); @@ -307,6 +319,30 @@
>> static void dpu_hw_ctl_update_pending_flush_dspp(struct dpu_hw_ctl *ctx,
>> }
>> }
>>
>> +static void dpu_hw_ctl_update_pending_flush_dspp_subblocks(
>> + struct dpu_hw_ctl *ctx, enum dpu_dspp dspp, u32 dspp_sub_blk) {
>> +
>
>And here?
>
>> + if (dspp >= DSPP_MAX)
>> + return;
>> +
>> + switch (dspp_sub_blk) {
>> + case DPU_DSPP_IGC:
>> + ctx->pending_dspp_flush_mask[dspp - DSPP_0] |= BIT(2);
>> + break;
>> + case DPU_DSPP_PCC:
>> + ctx->pending_dspp_flush_mask[dspp - DSPP_0] |= BIT(4);
>> + break;
>> + case DPU_DSPP_GC:
>> + ctx->pending_dspp_flush_mask[dspp - DSPP_0] |= BIT(5);
>> + break;
>> + default:
>> + return;
>> + }
>> +
>> + ctx->pending_flush_mask |= BIT(29);
>
>Can/should we define an _IDX for this, like is done with MERGE_3D_IDX,
>DSC_IDX, INTF_IDX and WB_IDX?
>
>> +}
>> +
>> static u32 dpu_hw_ctl_poll_reset_status(struct dpu_hw_ctl *ctx, u32
>> timeout_us) {
>> struct dpu_hw_blk_reg_map *c = &ctx->hw; @@ -675,7 +711,11 @@
>> static void _setup_ctl_ops(struct dpu_hw_ctl_ops *ops,
>> ops->setup_blendstage = dpu_hw_ctl_setup_blendstage;
>> ops->update_pending_flush_sspp =
>dpu_hw_ctl_update_pending_flush_sspp;
>> ops->update_pending_flush_mixer =
>dpu_hw_ctl_update_pending_flush_mixer;
>> - ops->update_pending_flush_dspp =
>dpu_hw_ctl_update_pending_flush_dspp;
>> + if (cap & BIT(DPU_CTL_DSPP_SUB_BLOCK_FLUSH))
>> + ops->update_pending_flush_dspp =
>dpu_hw_ctl_update_pending_flush_dspp_subblocks;
>> + else
>> + ops->update_pending_flush_dspp =
>> + dpu_hw_ctl_update_pending_flush_dspp;
>> +
>> if (cap & BIT(DPU_CTL_FETCH_ACTIVE))
>> ops->set_active_pipes =
>> dpu_hw_ctl_set_fetch_pipe_active; }; diff --git
>> a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
>> index 96c012e..78611a8 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
>> @@ -152,9 +152,11 @@ struct dpu_hw_ctl_ops {
>> * No effect on hardware
>> * @ctx : ctl path ctx pointer
>> * @blk : DSPP block index
>> + * @dspp_sub_blk : DSPP sub-block index
>> */
>> void (*update_pending_flush_dspp)(struct dpu_hw_ctl *ctx,
>> - enum dpu_dspp blk);
>> + enum dpu_dspp blk, u32 dspp_sub_blk);
>> +
>> /**
>> * Write the value of the pending_flush_mask to hardware
>> * @ctx : ctl path ctx pointer
>> @@ -242,6 +244,7 @@ struct dpu_hw_ctl {
>> u32 pending_intf_flush_mask;
>> u32 pending_wb_flush_mask;
>> u32 pending_merge_3d_flush_mask;
>> + u32 pending_dspp_flush_mask[DSPP_MAX - DSPP_0];
>>
>> /* ops */
>> struct dpu_hw_ctl_ops ops;
>> --
>> 2.7.4
>>
More information about the dri-devel
mailing list