[PATCH] drm/i915/dg2: Return Wa_22012654132 to just specific steppings

[Matt Roper]

Programming of the ENABLE_PREFETCH_INTO_IC bit originally showed up in
both the general DG2 tuning guide (applicable to all DG2
variants/steppings) and under Wa_22012654132 (applicable only to
specific steppings).  It has now been removed from the tuning guide, and
the guidance is to only program it in the specific steppings associated
with the workaround.

Bspec: 68331
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
 drivers/gpu/drm/i915/gt/intel_workarounds.c | 27 ++++++++++-----------
 1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_workarounds.c b/drivers/gpu/drm/i915/gt/intel_workarounds.c
index 7d71f5bbddc8..bf84efb3f15f 100644
--- a/drivers/gpu/drm/i915/gt/intel_workarounds.c
+++ b/drivers/gpu/drm/i915/gt/intel_workarounds.c
@@ -2913,20 +2913,6 @@ add_render_compute_tuning_settings(struct drm_i915_private *i915,
 	if (IS_DG2(i915)) {
 		wa_mcr_write_or(wal, XEHP_L3SCQREG7, BLEND_FILL_CACHING_OPT_DIS);
 		wa_mcr_write_clr_set(wal, RT_CTRL, STACKID_CTRL, STACKID_CTRL_512);
-
-		/*
-		 * This is also listed as Wa_22012654132 for certain DG2
-		 * steppings, but the tuning setting programming is a superset
-		 * since it applies to all DG2 variants and steppings.
-		 *
-		 * Note that register 0xE420 is write-only and cannot be read
-		 * back for verification on DG2 (due to Wa_14012342262), so
-		 * we need to explicitly skip the readback.
-		 */
-		wa_mcr_add(wal, GEN10_CACHE_MODE_SS, 0,
-			   _MASKED_BIT_ENABLE(ENABLE_PREFETCH_INTO_IC),
-			   0 /* write-only, so skip validation */,
-			   true);
 	}
 
 	/*
@@ -3022,6 +3008,19 @@ general_render_compute_wa_init(struct intel_engine_cs *engine, struct i915_wa_li
 		/* Wa_18017747507:dg2 */
 		wa_masked_en(wal, VFG_PREEMPTION_CHICKEN, POLYGON_TRIFAN_LINELOOP_DISABLE);
 	}
+
+	if (IS_DG2_GRAPHICS_STEP(i915, G10, STEP_A0, STEP_C0) || IS_DG2_G11(i915))
+		/*
+		 * Wa_22012654132
+		 *
+		 * Note that register 0xE420 is write-only and cannot be read
+		 * back for verification on DG2 (due to Wa_14012342262), so
+		 * we need to explicitly skip the readback.
+		 */
+		wa_mcr_add(wal, GEN10_CACHE_MODE_SS, 0,
+			   _MASKED_BIT_ENABLE(ENABLE_PREFETCH_INTO_IC),
+			   0 /* write-only, so skip validation */,
+			   true);
 }
 
 static void
-- 
2.38.1