[PATCH V5 2/4] dt-bindings: display: panel: Add Magnachip D53E6EA8966
Chris Morgan
macroalpha82 at gmail.com
Wed Dec 14 18:06:09 UTC 2022
From: Chris Morgan <macromorgan at hotmail.com>
Add documentation for Magnachip D53E6EA8966 based panels such as the
Samsung AMS495QA01 panel.
Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
Signed-off-by: Maya Matuszczyk <maccraft123mc at gmail.com>
---
.../display/panel/magnachip,d53e6ea8966.yaml | 62 +++++++++++++++++++
1 file changed, 62 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/magnachip,d53e6ea8966.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/magnachip,d53e6ea8966.yaml b/Documentation/devicetree/bindings/display/panel/magnachip,d53e6ea8966.yaml
new file mode 100644
index 000000000000..0a57a303a758
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/magnachip,d53e6ea8966.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ams495qa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Magnachip D53E6EA8966 based display panel
+
+description: |
+ Magnachip D53E6EA8966 based display panels, such as the one found on
+ the Anbernic RG503 that is combined with a 940x544 OLED Samsung
+ AMS495QA01.
+
+maintainers:
+ - Chris Morgan <macromorgan at hotmail.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: samsung,ams495qa01
+
+ reg: true
+ reset-gpios:
+ description: reset gpio, must be GPIO_ACTIVE_LOW
+ elvdd-supply:
+ description: regulator that supplies voltage to the panel display
+ enable-gpios: true
+ port: true
+ vdd-supply:
+ description: regulator that supplies voltage to panel logic
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - vdd-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel at 0 {
+ compatible = "samsung,ams495qa01";
+ reg = <0>;
+ reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&vcc_3v3>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+ };
+
+...
--
2.34.1
More information about the dri-devel
mailing list