[RFC PATCH 0/6] drm/msm: DSC Electric Boogaloo for sm8[12]50

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Wed Dec 14 18:40:06 UTC 2022


On 14/12/2022 01:22, Marijn Suijten wrote:
> This preliminary Display Stream Compression support package for
> (initially tested on) sm8[12]50 is based on comparing DSC behaviour
> between downstream and mainline.  Some new callbacks are added (for
> binding blocks on active CTLs), logic bugs are corrected, zeroed struct
> members are now assigned proper values, and RM allocation and hw block
> retrieval now hand out (or not) DSC blocks without causing null-pointer
> dereferences.
> 
> Unfortunately it is not yet enough to get rid of completely corrupted
> display output on the boards I tested here:
> - Sony Xperia 1 (sm8150), 1644x3840 or 1096x2560 pixels;
> - Sony Xperia 5II (sm8250), 1080x2520, at 60 or 120Hz;
> - (can include more Xperia boards if desired)
> 
> Both devices use the DUALPIPE_DSCMERGE topology downstream: dual LM, PP
> and DSC, but only a single INTF/encoder/DSI-link.
> 
> Hopefully this spawns some community/upstream interest to help rootcause
> our corruption issues (after we open a drm/msm report on GitLab for more
> appropriate tracking).
> 
> The Sony Xperia XZ3 (sdm845) was fully tested and validated with this
> series to not cause any regressions (an one of the math fixes now allows
> us to change slice_count in the panel driver, which would corrupt
> previously).
> 
> Marijn Suijten (6):
>    drm/msm/dpu1: Implement DSC binding to PP block for CTL V1
>    drm/msm/dpu1: Add DSC config for sm8150 and sm8250
>    drm/msm/dpu1: Wire up DSC mask for active CTL configuration
>    drm/msm/dsi: Use DSC slice(s) packet size to compute word count
>    drm/msm/dsi: Flip greater-than check for slice_count and
>      slice_per_intf
>    drm/msm/dpu: Disallow unallocated (DSC) resources to be returned

General comment: patches with Fixes ideally should come first. Usually 
they are picked into -fixes and/or stable kernels. If the Fixes patches 
are in the middle of the series, one can not be sure that they do not 
have dependencies on previous patches. If there is one, it should 
probably be stated clearly to ease work on backporting them.

> 
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c   |  3 +++
>   .../drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c  |  1 +
>   .../drm/msm/disp/dpu1/dpu_encoder_phys_vid.c  |  1 +
>   .../drm/msm/disp/dpu1/dpu_encoder_phys_wb.c   |  2 ++
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 23 +++++++++++-----
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |  9 +++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c    | 27 +++++++++++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h    |  4 +++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c        | 10 +++++++
>   drivers/gpu/drm/msm/dsi/dsi_host.c            |  6 ++---
>   10 files changed, 77 insertions(+), 9 deletions(-)
> 
> --
> 2.38.1
> 

-- 
With best wishes
Dmitry



More information about the dri-devel mailing list