[PATCH v6 01/12] drm/edid: store quirks in display info

[Jani Nikula]

Although the quirks are internal to EDID parsing, it'll be helpful to
store them in display info to avoid having to pass them around.

This will also help separate adding probed modes (which needs the
quirks) from updating display info.

Cc: Imre Deak <imre.deak at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/drm_edid.c  | 41 ++++++++++++++++++-------------------
 include/drm/drm_connector.h |  5 +++++
 2 files changed, 25 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 3841aba17abd..1df337b207f2 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -6374,18 +6374,19 @@ static void drm_reset_display_info(struct drm_connector *connector)
 	info->mso_stream_count = 0;
 	info->mso_pixel_overlap = 0;
 	info->max_dsc_bpp = 0;
+	info->quirks = 0;
 }
 
-static u32 update_display_info(struct drm_connector *connector,
-			       const struct drm_edid *drm_edid)
+static void update_display_info(struct drm_connector *connector,
+				const struct drm_edid *drm_edid)
 {
 	struct drm_display_info *info = &connector->display_info;
 	const struct edid *edid = drm_edid->edid;
 
-	u32 quirks = edid_get_quirks(drm_edid);
-
 	drm_reset_display_info(connector);
 
+	info->quirks = edid_get_quirks(drm_edid);
+
 	info->width_mm = edid->width_cm * 10;
 	info->height_mm = edid->height_cm * 10;
 
@@ -6456,17 +6457,15 @@ static u32 update_display_info(struct drm_connector *connector,
 	drm_update_mso(connector, drm_edid);
 
 out:
-	if (quirks & EDID_QUIRK_NON_DESKTOP) {
+	if (info->quirks & EDID_QUIRK_NON_DESKTOP) {
 		drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s] Non-desktop display%s\n",
 			    connector->base.id, connector->name,
 			    info->non_desktop ? " (redundant quirk)" : "");
 		info->non_desktop = true;
 	}
 
-	if (quirks & EDID_QUIRK_CAP_DSC_15BPP)
+	if (info->quirks & EDID_QUIRK_CAP_DSC_15BPP)
 		info->max_dsc_bpp = 15;
-
-	return quirks;
 }
 
 static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *dev,
@@ -6564,8 +6563,8 @@ static int add_displayid_detailed_modes(struct drm_connector *connector,
 static int _drm_edid_connector_update(struct drm_connector *connector,
 				      const struct drm_edid *drm_edid)
 {
+	struct drm_display_info *info = &connector->display_info;
 	int num_modes = 0;
-	u32 quirks;
 
 	if (!drm_edid) {
 		drm_reset_display_info(connector);
@@ -6578,7 +6577,7 @@ static int _drm_edid_connector_update(struct drm_connector *connector,
 	 * To avoid multiple parsing of same block, lets parse that map
 	 * from sink info, before parsing CEA modes.
 	 */
-	quirks = update_display_info(connector, drm_edid);
+	update_display_info(connector, drm_edid);
 
 	/* Depends on info->cea_rev set by update_display_info() above */
 	drm_edid_to_eld(connector, drm_edid);
@@ -6597,7 +6596,7 @@ static int _drm_edid_connector_update(struct drm_connector *connector,
 	 *
 	 * XXX order for additional mode types in extension blocks?
 	 */
-	num_modes += add_detailed_modes(connector, drm_edid, quirks);
+	num_modes += add_detailed_modes(connector, drm_edid, info->quirks);
 	num_modes += add_cvt_modes(connector, drm_edid);
 	num_modes += add_standard_modes(connector, drm_edid);
 	num_modes += add_established_modes(connector, drm_edid);
@@ -6607,20 +6606,20 @@ static int _drm_edid_connector_update(struct drm_connector *connector,
 	if (drm_edid->edid->features & DRM_EDID_FEATURE_CONTINUOUS_FREQ)
 		num_modes += add_inferred_modes(connector, drm_edid);
 
-	if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
-		edid_fixup_preferred(connector, quirks);
+	if (info->quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
+		edid_fixup_preferred(connector, info->quirks);
 
-	if (quirks & EDID_QUIRK_FORCE_6BPC)
-		connector->display_info.bpc = 6;
+	if (info->quirks & EDID_QUIRK_FORCE_6BPC)
+		info->bpc = 6;
 
-	if (quirks & EDID_QUIRK_FORCE_8BPC)
-		connector->display_info.bpc = 8;
+	if (info->quirks & EDID_QUIRK_FORCE_8BPC)
+		info->bpc = 8;
 
-	if (quirks & EDID_QUIRK_FORCE_10BPC)
-		connector->display_info.bpc = 10;
+	if (info->quirks & EDID_QUIRK_FORCE_10BPC)
+		info->bpc = 10;
 
-	if (quirks & EDID_QUIRK_FORCE_12BPC)
-		connector->display_info.bpc = 12;
+	if (info->quirks & EDID_QUIRK_FORCE_12BPC)
+		info->bpc = 12;
 
 	return num_modes;
 }
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 9037f1317aee..35e659d1851a 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -721,6 +721,11 @@ struct drm_display_info {
 	 * monitor's default value is used instead.
 	 */
 	u32 max_dsc_bpp;
+
+	/**
+	 * @quirks: EDID based quirks. Internal to EDID parsing.
+	 */
+	u32 quirks;
 };
 
 int drm_display_info_set_bus_formats(struct drm_display_info *info,
-- 
2.34.1