[RFC PATCH 0/4] Add RGB ttl connection on rockchip phy

[Michael Nazzareno Trimarchi]

Hi all

On Sun, Oct 2, 2022 at 8:45 AM Michael Trimarchi
<michael at amarulasolutions.com> wrote:
>
> The rockchip phy can be convigured in ttl mode. The phy is shared
> between lvds, dsi, ttl. The configuration that now I'm able to support
> has the display output on some set of pins on standard vop output
> and a set of pins using the ttl phy. The solution is not clean as I
> would like to have because some register that are used to enable
> the TTL, are in the same register area of the dsi controller.
> In order to test I must add the following
>
> dsi_dphy: phy at ff2e0000 {
>
>         reg = <0x0 0xff2e0000 0x0 0x10000>,
>                 <0x0 0xff450000 0x0 0x10000>;
>         ...
> }
>
> The problem here is the second region I have added is the same of
> dsi logic. Only one register is needed by the the phy driver
>

Is there anyone who has time to review it?

Michael

> Michael Trimarchi (4):
>   phy: add PHY_MODE_TTL
>   phy: rockchip: Add inno_is_valid_phy_mode
>   phy: rockchip: Implement TTY phy mode
>   drm/rockchip: rgb: Add dphy connection to rgb output
>
>  drivers/gpu/drm/rockchip/rockchip_rgb.c       | 18 +++++
>  .../phy/rockchip/phy-rockchip-inno-dsidphy.c  | 72 +++++++++++++++++++
>  include/linux/phy/phy.h                       |  3 +-
>  3 files changed, 92 insertions(+), 1 deletion(-)
>
> --
> 2.34.1
>


-- 
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael at amarulasolutions.com
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info at amarulasolutions.com
www.amarulasolutions.com