[PATCH v3 2/2] dt-bindings: display/panel: Add AUO A030JTN01

[Christophe Branchereau]

It's missing the spi node, will do v4 once panel driver is reviewed.

On Tue, Dec 20, 2022, 15:10 Rob Herring <robh at kernel.org> wrote:

>
> On Tue, 20 Dec 2022 13:01:08 +0100, Christophe Branchereau wrote:
> > From: Paul Cercueil <paul at crapouillou.net>
> >
> > Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
> > 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
> > interface.
> >
> > Signed-off-by: Paul Cercueil <paul at crapouillou.net>
> > Signed-off-by: Christophe Branchereau <cbranchereau at gmail.com>
> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> > ---
> >  .../bindings/display/panel/auo,a030jtn01.yaml | 54 +++++++++++++++++++
> >  1 file changed, 54 insertions(+)
> >  create mode 100644
> Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dts:22.11-21:
> Warning (reg_format): /example-0/panel at 0:reg: property has invalid length
> (4 bytes) (#address-cells == 1, #size-cells == 1)
> Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dtb:
> Warning (pci_device_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dtb:
> Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dtb:
> Warning (simple_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dtb:
> Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dtb:
> Warning (spi_bus_reg): Failed prerequisite 'reg_format'
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.example.dtb:
> panel at 0: Unevaluated properties are not allowed ('spi-max-frequency' was
> unexpected)
>         From schema:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
>
> doc reference errors (make refcheckdocs):
>
> See
> https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221220120108.481554-3-cbranchereau@gmail.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your
> schema.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20221220/e4cfc611/attachment.htm>