[Intel-gfx] [PATCH v2 1/1] drm/i915/pxp: Use drm_dbg if arb session failed due to fw version
Jani Nikula
jani.nikula at linux.intel.com
Wed Dec 21 10:21:32 UTC 2022
On Tue, 20 Dec 2022, Alan Previn <alan.previn.teres.alexis at intel.com> wrote:
> If PXP arb-session is being attempted on older hardware SKUs or
> on hardware with older, unsupported, firmware versions, then don't
> report the failure with a drm_error. Instead, look specifically for
> the API-version error reply and drm_dbg that reply. In this case, the
> user-space will eventually get a -ENODEV for the protected context
> creation which is the correct behavior and we don't create unnecessary
> drm_error's in our dmesg (for what is unsupported platforms).
>
> Changes from prio revs:
> v1 : - print incorrect version from input packet, not output.
>
> Signed-off-by: Alan Previn <alan.previn.teres.alexis at intel.com>
> ---
> drivers/gpu/drm/i915/pxp/intel_pxp_cmd_interface_cmn.h | 1 +
> drivers/gpu/drm/i915/pxp/intel_pxp_tee.c | 5 +++++
> 2 files changed, 6 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/pxp/intel_pxp_cmd_interface_cmn.h b/drivers/gpu/drm/i915/pxp/intel_pxp_cmd_interface_cmn.h
> index c2f23394f9b8..aaa8187a0afb 100644
> --- a/drivers/gpu/drm/i915/pxp/intel_pxp_cmd_interface_cmn.h
> +++ b/drivers/gpu/drm/i915/pxp/intel_pxp_cmd_interface_cmn.h
> @@ -17,6 +17,7 @@
> */
> enum pxp_status {
> PXP_STATUS_SUCCESS = 0x0,
> + PXP_STATUS_ERROR_API_VERSION = 0x1002,
> PXP_STATUS_OP_NOT_PERMITTED = 0x4013
> };
>
> diff --git a/drivers/gpu/drm/i915/pxp/intel_pxp_tee.c b/drivers/gpu/drm/i915/pxp/intel_pxp_tee.c
> index d50354bfb993..9d084ed9cc50 100644
> --- a/drivers/gpu/drm/i915/pxp/intel_pxp_tee.c
> +++ b/drivers/gpu/drm/i915/pxp/intel_pxp_tee.c
> @@ -298,6 +298,11 @@ int intel_pxp_tee_cmd_create_arb_session(struct intel_pxp *pxp,
>
> if (ret)
> drm_err(&i915->drm, "Failed to send tee msg ret=[%d]\n", ret);
> +
Superfluous newline that someone's gonna send a patch later to
remove. Easier to just not add it.
BR,
Jani.
> + else if (msg_out.header.status == PXP_STATUS_ERROR_API_VERSION)
> + drm_dbg(&i915->drm, "PXP firmware version unsupported, requested: "
> + "CMD-ID-[0x%08x] on API-Ver-[0x%08x]\n",
> + msg_in.header.command_id, msg_in.header.api_version);
> else if (msg_out.header.status != 0x0)
> drm_warn(&i915->drm, "PXP firmware failed arb session init request ret=[0x%08x]\n",
> msg_out.header.status);
>
> base-commit: cc44a1e87ea6b788868878295119398966f98a81
--
Jani Nikula, Intel Open Source Graphics Center
More information about the dri-devel
mailing list