[PATCH 1/2] backlight: ktz8866: Add support for Kinetic KTZ8866 backlight
Han Jingoo
jingoohan1 at gmail.com
Wed Dec 21 19:55:50 UTC 2022
On Tue, Dec 20, 2022, Jianhua Lu <lujianhua000 at gmail.com> wrote:
>
> Add support for Kinetic KTZ8866 backlight, which is used in
> Xiaomi tablet, Mi Pad 5 series. This driver lightly based on
> downstream implementation [1].
> [1] https://github.com/MiCode/Xiaomi_Kernel_OpenSource/blob/elish-r-oss/drivers/video/backlight/ktz8866.c
>
> Signed-off-by: Jianhua Lu <lujianhua000 at gmail.com>
> ---
> drivers/video/backlight/Kconfig | 8 ++
> drivers/video/backlight/Makefile | 1 +
> drivers/video/backlight/ktz8866.c | 173 ++++++++++++++++++++++++++++++
> drivers/video/backlight/ktz8866.h | 31 ++++++
> 4 files changed, 213 insertions(+)
> create mode 100644 drivers/video/backlight/ktz8866.c
> create mode 100644 drivers/video/backlight/ktz8866.h
>
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index 936ba1e4d35e..2845fd7e33ad 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -190,6 +190,14 @@ config BACKLIGHT_KTD253
> which is a 1-wire GPIO-controlled backlight found in some mobile
> phones.
>
> +config BACKLIGHT_KTZ8866
> + tristate "Backlight Driver for Kinetic KTZ8866"
> + depends on I2C
> + select REGMAP_I2C
> + help
> + Say Y to enabled the backlight driver for the Kinetic KTZ8866
> + found in Xiaomi Mi Pad 5 series.
> +
> config BACKLIGHT_LM3533
> tristate "Backlight Driver for LM3533"
> depends on MFD_LM3533
> diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
> index e815f3f1deff..f70a819c304c 100644
> --- a/drivers/video/backlight/Makefile
> +++ b/drivers/video/backlight/Makefile
> @@ -36,6 +36,7 @@ obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
> obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o
> obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO) += ipaq_micro_bl.o
> obj-$(CONFIG_BACKLIGHT_KTD253) += ktd253-backlight.o
> +obj-$(CONFIG_BACKLIGHT_KTZ8866) += ktz8866.o
> obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o
> obj-$(CONFIG_BACKLIGHT_LM3630A) += lm3630a_bl.o
> obj-$(CONFIG_BACKLIGHT_LM3639) += lm3639_bl.o
> diff --git a/drivers/video/backlight/ktz8866.c b/drivers/video/backlight/ktz8866.c
> new file mode 100644
> index 000000000000..1eaf72d9116b
> --- /dev/null
> +++ b/drivers/video/backlight/ktz8866.c
> @@ -0,0 +1,173 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Backlight driver for the Kinetic KTZ8866
> + *
> + * Copyright (C) Jianhua Lu <lujianhua000 at gmail.com>
Please add '2022'.
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/of.h>
> +#include <linux/i2c.h>
Please sort these headers alphabetically.
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include "ktz8866.h"
> +
> +#define DEF_BRIGHTNESS 1500
What is 'DEF'? Please use more meaningful name.
> +#define MAX_BRIGHTNESS 2047
> +#define REG_MAX 0x15
> +
> +/* Helper */
Remove this meaningless comment line.
> +#define low_3_bit(x) ((x)&0x7)
> +#define high_8_bit(x) ((x >> 3) & 0xFF)
> +
> +struct ktz8866 {
> + struct i2c_client *client;
> + struct regmap *regmap;
> + bool state;
> +};
> +
> +enum {
> + LED_OFF,
> + LED_ON,
> +};
> +
> +static const struct regmap_config ktz8866_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = REG_MAX,
> +};
> +
> +int ktz8866_write(struct ktz8866 *ktz, unsigned int reg, unsigned int val)
Add 'static' here, unless you have a reason.
> +{
> + return regmap_write(ktz->regmap, reg, val);
> +}
> +
> +static int ktz8866_update_bits(struct ktz8866 *ktz, unsigned int reg,
> + unsigned int mask, unsigned int val)
> +{
> + return regmap_update_bits(ktz->regmap, reg, mask, val);
> +}
> +
> +static int
> +ktz8866_backlight_update_status(struct backlight_device *backlight_dev)
Hmm, use 1 line not 2 lines, if there is no reason.
> +{
> + struct ktz8866 *ktz = bl_get_data(backlight_dev);
> + unsigned int brightness = backlight_get_brightness(backlight_dev);
> +
> + if (!ktz->state && brightness > 0) {
> + ktz8866_update_bits(ktz, BL_EN, BIT(6), BIT(6));
Please use definitions.
> + ktz->state = LED_ON;
> + } else if (brightness == 0) {
> + ktz8866_update_bits(ktz, BL_EN, BIT(6), 0);
> + ktz->state = LED_OFF;
> + msleep(10);
> + }
> +
> + /* Set brightness */
> + ktz8866_write(ktz, BL_BRT_LSB, low_3_bit(brightness));
> + ktz8866_write(ktz, BL_BRT_MSB, high_8_bit(brightness));
> +
> + return 0;
> +}
> +
> +static const struct backlight_ops ktz8866_backlight_ops = {
> + .options = BL_CORE_SUSPENDRESUME,
> + .update_status = ktz8866_backlight_update_status,
> +};
> +
> +static void ktz8866_init(struct ktz8866 *ktz)
> +{
> + /* Enable 1~5 current sinks */
> + ktz8866_write(ktz, BL_EN, 0x1F);
> + /* Backlight OVP 26.4V */
> + ktz8866_write(ktz, BL_CFG1, 0x33);
> + /* LED ramping time 128ms */
> + ktz8866_write(ktz, BL_CFG2, 0xBD);
> + /* LED on/off ramping time 1ms */
> + ktz8866_write(ktz, BL_DIMMING, 0x11);
> + /* Enable OUTP and OUTN via pin ENP and ENN */
> + ktz8866_write(ktz, LCD_BIAS_CFG1, 0x9F);
> + /* Backlight Full-scale LED Current 30.0mA */
> + ktz8866_write(ktz, FULL_SCALE_CURRENT, 0xF9);
Don't use hardcoding.
Please add definitions for bits, and use these definitions.
> +}
> +
> +static int ktz8866_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct backlight_device *backlight_dev;
> + struct backlight_properties props;
> + struct ktz8866 *ktz;
> +
> + ktz = devm_kzalloc(&client->dev, sizeof(*ktz), GFP_KERNEL);
> + if (!ktz)
> + return -ENOMEM;
> +
> + ktz->client = client;
> + ktz->regmap = devm_regmap_init_i2c(client, &ktz8866_regmap_config);
> +
> + if (IS_ERR(ktz->regmap)) {
> + dev_err(&client->dev, "failed to init regmap\n");
> + return PTR_ERR(ktz->regmap);
> + }
> +
> + memset(&props, 0, sizeof(props));
> + props.type = BACKLIGHT_RAW;
> + props.max_brightness = MAX_BRIGHTNESS;
> + props.brightness =
> + clamp_t(unsigned int, DEF_BRIGHTNESS, 0, props.max_brightness);
> +
> + backlight_dev = devm_backlight_device_register(
> + &client->dev, "ktz8866-backlight", &client->dev, ktz,
> + &ktz8866_backlight_ops, &props);
> +
> + if (IS_ERR(backlight_dev)) {
> + dev_err(&client->dev, "failed to register backlight device\n");
> + return PTR_ERR(backlight_dev);
> + }
> +
> + ktz8866_init(ktz);
> +
> + i2c_set_clientdata(client, backlight_dev);
> + backlight_update_status(backlight_dev);
> +
> + return 0;
> +}
> +
> +static void ktz8866_remove(struct i2c_client *client)
> +{
> + struct backlight_device *backlight_dev = i2c_get_clientdata(client);
> +
> + backlight_dev->props.brightness = 0;
> + backlight_update_status(backlight_dev);
> +}
> +
> +static const struct i2c_device_id ktz8866_ids[] = {
> + { "ktz8866", 0 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, ktz8866_ids);
> +
> +static const struct of_device_id ktz8866_match_table[] = {
> + {
> + .compatible = "kinetic,ktz8866",
> + },
> + {},
> +};
> +
> +static struct i2c_driver ktz8866_driver = {
> + .driver = {
> + .name = "ktz8866",
> + .of_match_table = ktz8866_match_table,
> + },
> + .probe = ktz8866_probe,
> + .remove = ktz8866_remove,
> + .id_table = ktz8866_ids,
> +};
> +
> +module_i2c_driver(ktz8866_driver);
> +
> +MODULE_DESCRIPTION("Kinetic KTZ8866 Backlight Driver");
> +MODULE_AUTHOR("Jianhua Lu <lujianhua000 at gmail.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/video/backlight/ktz8866.h b/drivers/video/backlight/ktz8866.h
> new file mode 100644
> index 000000000000..b2a606288a7e
> --- /dev/null
> +++ b/drivers/video/backlight/ktz8866.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Register definitions for Kinetic KTZ8866 backlight
> + *
> + * Copyright (C) Jianhua Lu <lujianhua000 at gmail.com>
Please add '2022'.
Best regards,
Jingoo Han
> + */
> +
> +#ifndef KTZ8866_H
> +#define KTZ8866_H
> +
> +#define DEVICE_ID 0x01
> +#define BL_CFG1 0x02
> +#define BL_CFG2 0x03
> +#define BL_BRT_LSB 0x04
> +#define BL_BRT_MSB 0x05
> +#define BL_EN 0x08
> +#define LCD_BIAS_CFG1 0x09
> +#define LCD_BIAS_CFG2 0x0A
> +#define LCD_BIAS_CFG3 0x0B
> +#define LCD_BOOST_CFG 0x0C
> +#define OUTP_CFG 0x0D
> +#define OUTN_CFG 0x0E
> +#define FLAG 0x0F
> +#define BL_OPTION1 0x10
> +#define BL_OPTION2 0x11
> +#define PWM2DIG_LSBs 0x12
> +#define PWM2DIG_MSBs 0x13
> +#define BL_DIMMING 0x14
> +#define FULL_SCALE_CURRENT 0x15
> +
> +#endif /* KTZ8866_H */
> --
> 2.38.2
>
More information about the dri-devel
mailing list