[PATCH v6 05/17] dt-bindings: display: rockchip: convert dw_mipi_dsi_rockchip.txt to yaml
Johan Jonker
jbx6244 at gmail.com
Thu Dec 22 14:26:28 UTC 2022
Convert dw_mipi_dsi_rockchip.txt to yaml.
Changed:
file name
requirements
Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
Changed V6:
Remove clock-master property
Fix $ref
---
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 94 ----------
.../rockchip/rockchip,dw-mipi-dsi.yaml | 166 ++++++++++++++++++
2 files changed, 166 insertions(+), 94 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
deleted file mode 100644
index 9a223df85..000000000
--- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-Rockchip specific extensions to the Synopsys Designware MIPI DSI
-================================
-
-Required properties:
-- #address-cells: Should be <1>.
-- #size-cells: Should be <0>.
-- compatible: one of
- "rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi"
- "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"
- "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"
- "rockchip,rk3568-mipi-dsi", "snps,dw-mipi-dsi"
-- reg: Represent the physical address range of the controller.
-- interrupts: Represent the controller's interrupt to the CPU(s).
-- clocks, clock-names: Phandles to the controller's pll reference
- clock(ref) when using an internal dphy and APB clock(pclk).
- For RK3399, a phy config clock (phy_cfg) and a grf clock(grf)
- are required. As described in [1].
-- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
-- ports: contain a port node with endpoint definitions as defined in [2].
- For vopb,set the reg = <0> and set the reg = <1> for vopl.
-- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
-- video port 1 for either a panel or subsequent encoder
-
-Optional properties:
-- phys: from general PHY binding: the phandle for the PHY device.
-- phy-names: Should be "dphy" if phys references an external phy.
-- #phy-cells: Defined when used as ISP phy, should be 0.
-- power-domains: a phandle to mipi dsi power domain node.
-- resets: list of phandle + reset specifier pairs, as described in [3].
-- reset-names: string reset name, must be "apb".
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/media/video-interfaces.txt
-[3] Documentation/devicetree/bindings/reset/reset.txt
-
-Example:
- mipi_dsi: mipi at ff960000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
- reg = <0xff960000 0x4000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
- clock-names = "ref", "pclk";
- resets = <&cru SRST_MIPIDSI0>;
- reset-names = "apb";
- rockchip,grf = <&grf>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi_in: port at 0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi_in_vopb: endpoint at 0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_mipi>;
- };
- mipi_in_vopl: endpoint at 1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_mipi>;
- };
- };
-
- mipi_out: port at 1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi_out_panel: endpoint {
- remote-endpoint = <&panel_in_mipi>;
- };
- };
- };
-
- panel {
- compatible ="boe,tv080wum-nl0";
- reg = <0>;
-
- enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_en>;
- backlight = <&backlight>;
-
- port {
- panel_in_mipi: endpoint {
- remote-endpoint = <&mipi_out_panel>;
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
new file mode 100644
index 000000000..8e8a40879
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Synopsys Designware MIPI DSI
+
+maintainers:
+ - Sandy Huang <hjc at rock-chips.com>
+ - Heiko Stuebner <heiko at sntech.de>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - rockchip,px30-mipi-dsi
+ - rockchip,rk3288-mipi-dsi
+ - rockchip,rk3399-mipi-dsi
+ - rockchip,rk3568-mipi-dsi
+ - const: snps,dw-mipi-dsi
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ oneOf:
+ - minItems: 2
+ items:
+ - const: ref
+ - const: pclk
+ - const: phy_cfg
+ - const: grf
+ - const: pclk
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ This SoC uses GRF regs to switch between vopl/vopb.
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: dphy
+
+ "#phy-cells":
+ const: 0
+ description:
+ Defined when in use as ISP phy.
+
+ power-domains:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - rockchip,grf
+
+allOf:
+ - $ref: /schemas/display/bridge/snps,dw-mipi-dsi.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - rockchip,px30-mipi-dsi
+ - rockchip,rk3568-mipi-dsi
+
+ then:
+ properties:
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ maxItems: 1
+
+ required:
+ - phys
+ - phy-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3288-mipi-dsi
+
+ then:
+ properties:
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: rockchip,rk3399-mipi-dsi
+
+ then:
+ properties:
+ clocks:
+ minItems: 4
+
+ clock-names:
+ minItems: 4
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3288-cru.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ mipi_dsi: dsi at ff960000 {
+ compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0xff960000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
+ clock-names = "ref", "pclk";
+ resets = <&cru SRST_MIPIDSI0>;
+ reset-names = "apb";
+ rockchip,grf = <&grf>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_in: port at 0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_in_vopb: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+ mipi_in_vopl: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+
+ mipi_out: port at 1 {
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&panel_in_mipi>;
+ };
+ };
+ };
+ };
--
2.20.1
More information about the dri-devel
mailing list