[PATCH 09/14] drm/panel-samsung-s6e88a0-ams452ef01: Drop custom DSI write macro

[Javier Martinez Canillas]

There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use
that instead and delete the custom DSI write macro defined in the driver.

Signed-off-by: Javier Martinez Canillas <javierm at redhat.com>
---

 .../panel/panel-samsung-s6e88a0-ams452ef01.c  | 24 +++++++------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c b/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c
index 97ff7a18545c..e94d88fed4f3 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e88a0-ams452ef01.c
@@ -28,14 +28,6 @@ s6e88a0_ams452ef01 *to_s6e88a0_ams452ef01(struct drm_panel *panel)
 	return container_of(panel, struct s6e88a0_ams452ef01, panel);
 }
 
-#define dsi_dcs_write_seq(dsi, seq...) do {				\
-		static const u8 d[] = { seq };				\
-		int ret;						\
-		ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));	\
-		if (ret < 0)						\
-			return ret;					\
-	} while (0)
-
 static void s6e88a0_ams452ef01_reset(struct s6e88a0_ams452ef01 *ctx)
 {
 	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
@@ -54,8 +46,8 @@ static int s6e88a0_ams452ef01_on(struct s6e88a0_ams452ef01 *ctx)
 
 	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
 
-	dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); // enable LEVEL2 commands
-	dsi_dcs_write_seq(dsi, 0xcc, 0x4c); // set Pixel Clock Divider polarity
+	mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); // enable LEVEL2 commands
+	mipi_dsi_dcs_write_seq(dsi, 0xcc, 0x4c); // set Pixel Clock Divider polarity
 
 	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
 	if (ret < 0) {
@@ -65,7 +57,7 @@ static int s6e88a0_ams452ef01_on(struct s6e88a0_ams452ef01 *ctx)
 	msleep(120);
 
 	// set default brightness/gama
-	dsi_dcs_write_seq(dsi, 0xca,
+	mipi_dsi_dcs_write_seq(dsi, 0xca,
 			  0x01, 0x00, 0x01, 0x00, 0x01, 0x00,	// V255 RR,GG,BB
 			  0x80, 0x80, 0x80,			// V203 R,G,B
 			  0x80, 0x80, 0x80,			// V151 R,G,B
@@ -77,11 +69,11 @@ static int s6e88a0_ams452ef01_on(struct s6e88a0_ams452ef01 *ctx)
 			  0x6b, 0x68, 0x71,			// V3   R,G,B
 			  0x00, 0x00, 0x00);			// V1   R,G,B
 	// set default Amoled Off Ratio
-	dsi_dcs_write_seq(dsi, 0xb2, 0x40, 0x0a, 0x17, 0x00, 0x0a);
-	dsi_dcs_write_seq(dsi, 0xb6, 0x2c, 0x0b); // set default elvss voltage
-	dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
-	dsi_dcs_write_seq(dsi, 0xf7, 0x03); // gamma/aor update
-	dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); // disable LEVEL2 commands
+	mipi_dsi_dcs_write_seq(dsi, 0xb2, 0x40, 0x0a, 0x17, 0x00, 0x0a);
+	mipi_dsi_dcs_write_seq(dsi, 0xb6, 0x2c, 0x0b); // set default elvss voltage
+	mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
+	mipi_dsi_dcs_write_seq(dsi, 0xf7, 0x03); // gamma/aor update
+	mipi_dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); // disable LEVEL2 commands
 
 	ret = mipi_dsi_dcs_set_display_on(dsi);
 	if (ret < 0) {
-- 
2.38.1