[PATCH v2 2/3] arm64: dts: qcom: sm8150: Add DISPCC node

[Dmitry Baryshkov]

On Thu, 29 Dec 2022 at 12:05, Konrad Dybcio <konrad.dybcio at linaro.org> wrote:
>
> Years after the SoC support has been added, it's high time for it to
> get dispcc going. Add the node to ensure that.
>
> Tested-by: Marijn Suijten <marijn.suijten at somainline.org> # Xperia 5
> Reviewed-by: Marijn Suijten <marijn.suijten at somainline.org>
> Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>


> ---
> v1 -> v2:
> - Pick up tags
> - Remove required-opps
> - Move power-domains up
>  arch/arm64/boot/dts/qcom/sm8150.dtsi | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index a0c57fb798d3..c7935f7a2926 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -3579,6 +3579,29 @@ camnoc_virt: interconnect at ac00000 {
>                         qcom,bcm-voters = <&apps_bcm_voter>;
>                 };
>
> +               dispcc: clock-controller at af00000 {
> +                       compatible = "qcom,sm8150-dispcc";
> +                       reg = <0 0x0af00000 0 0x10000>;
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>,
> +                                <0>,
> +                                <0>,
> +                                <0>,
> +                                <0>,
> +                                <0>,
> +                                <0>;
> +                       clock-names = "bi_tcxo",
> +                                     "dsi0_phy_pll_out_byteclk",
> +                                     "dsi0_phy_pll_out_dsiclk",
> +                                     "dsi1_phy_pll_out_byteclk",
> +                                     "dsi1_phy_pll_out_dsiclk",
> +                                     "dp_phy_pll_link_clk",
> +                                     "dp_phy_pll_vco_div_clk";
> +                       power-domains = <&rpmhpd SM8150_MMCX>;
> +                       #clock-cells = <1>;
> +                       #reset-cells = <1>;
> +                       #power-domain-cells = <1>;
> +               };
> +
>                 pdc: interrupt-controller at b220000 {
>                         compatible = "qcom,sm8150-pdc", "qcom,pdc";
>                         reg = <0 0x0b220000 0 0x400>;
> --
> 2.39.0
>


-- 
With best wishes
Dmitry