[PATCH v4 10/11] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes

[Robert Foss]

Enable the display subsystem and the dsi0 output for
the sm8350-hdk board.

Signed-off-by: Robert Foss <robert.foss at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index e6deb08c6da0..1961f941ff83 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -213,10 +213,32 @@ &cdsp {
 	firmware-name = "qcom/sm8350/cdsp.mbn";
 };
 
+&dispcc {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+};
+
+&mdss_dsi0_phy  {
+	vdds-supply = <&vreg_l5b_0p88>;
+	status = "okay";
+};
+
 &gpi_dma1 {
 	status = "okay";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
 &mpss {
 	status = "okay";
 	firmware-name = "qcom/sm8350/modem.mbn";
-- 
2.34.1