[PATCH v13 2/9] drm/ingenic: Add support for JZ4780 and HDMI output

H. Nikolaus Schaller hns at goldelico.com
Wed Feb 2 16:31:16 UTC 2022


From: Paul Boddie <paul at boddie.org.uk>

Add support for the LCD controller present on JZ4780 SoCs.
This SoC uses 8-byte descriptors which extend the current
4-byte descriptors used for other Ingenic SoCs.

Tested on MIPS Creator CI20 board.

Signed-off-by: Paul Boddie <paul at boddie.org.uk>
Signed-off-by: Ezequiel Garcia <ezequiel at collabora.com>
Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
---
 drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 63 ++++++++++++++++++++++-
 drivers/gpu/drm/ingenic/ingenic-drm.h     | 38 ++++++++++++++
 2 files changed, 100 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index 9c60fc4605e4b..caa70fdd45466 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -6,6 +6,7 @@
 
 #include "ingenic-drm.h"
 
+#include <linux/bitfield.h>
 #include <linux/component.h>
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
@@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
 	u32 addr;
 	u32 id;
 	u32 cmd;
+	/* extended hw descriptor for jz4780 */
+	u32 offsize;
+	u32 pagewidth;
+	u32 cpos;
+	u32 dessize;
 } __aligned(16);
 
 struct ingenic_dma_hwdescs {
@@ -59,7 +65,10 @@ struct ingenic_dma_hwdescs {
 struct jz_soc_info {
 	bool needs_dev_clk;
 	bool has_osd;
+	bool has_alpha;
 	bool map_noncoherent;
+	bool use_extended_hwdesc;
+	bool plane_f0_not_working;
 	unsigned int max_width, max_height;
 	const u32 *formats_f0, *formats_f1;
 	unsigned int num_formats_f0, num_formats_f1;
@@ -446,6 +455,9 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
 	if (!crtc)
 		return 0;
 
+	if (priv->soc_info->plane_f0_not_working && plane == &priv->f0)
+		return -EINVAL;
+
 	crtc_state = drm_atomic_get_existing_crtc_state(state,
 							crtc);
 	if (WARN_ON(!crtc_state))
@@ -662,6 +674,33 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
 		hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
 		hwdesc->next = dma_hwdesc_addr(priv, next_id);
 
+		if (priv->soc_info->use_extended_hwdesc) {
+			hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
+
+			/* Extended 8-byte descriptor */
+			hwdesc->cpos = 0;
+			hwdesc->offsize = 0;
+			hwdesc->pagewidth = 0;
+
+			switch (newstate->fb->format->format) {
+			case DRM_FORMAT_XRGB1555:
+				hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
+				fallthrough;
+			case DRM_FORMAT_RGB565:
+				hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
+				break;
+			case DRM_FORMAT_XRGB8888:
+				hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
+				break;
+			}
+			hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
+					 JZ_LCD_CPOS_COEFFICIENT_OFFSET);
+			hwdesc->dessize =
+				(0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
+				FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
+				FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
+		}
+
 		if (drm_atomic_crtc_needs_modeset(crtc_state)) {
 			fourcc = newstate->fb->format->format;
 
@@ -693,6 +732,9 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
 		    | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
 	}
 
+	if (priv->soc_info->use_extended_hwdesc)
+		cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
+
 	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
 	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
@@ -1015,6 +1057,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
 	long parent_rate;
 	unsigned int i, clone_mask = 0;
 	int ret, irq;
+	u32 osdc = 0;
 
 	soc_info = of_device_get_match_data(dev);
 	if (!soc_info) {
@@ -1272,7 +1315,10 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
 
 	/* Enable OSD if available */
 	if (soc_info->has_osd)
-		regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
+		osdc |= JZ_LCD_OSDC_OSDEN;
+	if (soc_info->has_alpha)
+		osdc |= JZ_LCD_OSDC_ALPHAEN;
+	regmap_write(priv->map, JZ_REG_LCD_OSDC, osdc);
 
 	mutex_init(&priv->clk_mutex);
 	priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
@@ -1468,10 +1514,25 @@ static const struct jz_soc_info jz4770_soc_info = {
 	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
 };
 
+static const struct jz_soc_info jz4780_soc_info = {
+	.needs_dev_clk = true,
+	.has_osd = true,
+	.has_alpha = true,
+	.use_extended_hwdesc = true,
+	.plane_f0_not_working = true,	/* REVISIT */
+	.max_width = 4096,
+	.max_height = 2048,
+	.formats_f1 = jz4770_formats_f1,
+	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
+	.formats_f0 = jz4770_formats_f0,
+	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
+};
+
 static const struct of_device_id ingenic_drm_of_match[] = {
 	{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
 	{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
 	{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
+	{ .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
index 22654ac1dde1c..cb1d09b625881 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm.h
+++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
@@ -44,8 +44,11 @@
 #define JZ_REG_LCD_XYP1				0x124
 #define JZ_REG_LCD_SIZE0			0x128
 #define JZ_REG_LCD_SIZE1			0x12c
+#define JZ_REG_LCD_PCFG				0x2c0
 
 #define JZ_LCD_CFG_SLCD				BIT(31)
+#define JZ_LCD_CFG_DESCRIPTOR_8			BIT(28)
+#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN	BIT(25)
 #define JZ_LCD_CFG_PS_DISABLE			BIT(23)
 #define JZ_LCD_CFG_CLS_DISABLE			BIT(22)
 #define JZ_LCD_CFG_SPL_DISABLE			BIT(21)
@@ -63,6 +66,7 @@
 #define JZ_LCD_CFG_DE_ACTIVE_LOW		BIT(9)
 #define JZ_LCD_CFG_VSYNC_ACTIVE_LOW		BIT(8)
 #define JZ_LCD_CFG_18_BIT			BIT(7)
+#define JZ_LCD_CFG_24_BIT			BIT(6)
 #define JZ_LCD_CFG_PDW				(BIT(5) | BIT(4))
 
 #define JZ_LCD_CFG_MODE_GENERIC_16BIT		0
@@ -132,6 +136,7 @@
 #define JZ_LCD_CMD_SOF_IRQ			BIT(31)
 #define JZ_LCD_CMD_EOF_IRQ			BIT(30)
 #define JZ_LCD_CMD_ENABLE_PAL			BIT(28)
+#define JZ_LCD_CMD_FRM_ENABLE			BIT(26)
 
 #define JZ_LCD_SYNC_MASK			0x3ff
 
@@ -153,6 +158,7 @@
 #define JZ_LCD_RGBC_EVEN_BGR			(0x5 << 0)
 
 #define JZ_LCD_OSDC_OSDEN			BIT(0)
+#define JZ_LCD_OSDC_ALPHAEN			BIT(2)
 #define JZ_LCD_OSDC_F0EN			BIT(3)
 #define JZ_LCD_OSDC_F1EN			BIT(4)
 
@@ -176,6 +182,38 @@
 #define JZ_LCD_SIZE01_WIDTH_LSB			0
 #define JZ_LCD_SIZE01_HEIGHT_LSB		16
 
+#define JZ_LCD_DESSIZE_ALPHA_OFFSET		24
+#define JZ_LCD_DESSIZE_HEIGHT_MASK		GENMASK(23, 12)
+#define JZ_LCD_DESSIZE_WIDTH_MASK		GENMASK(11, 0)
+
+#define JZ_LCD_CPOS_BPP_15_16			(4 << 27)
+#define JZ_LCD_CPOS_BPP_18_24			(5 << 27)
+#define JZ_LCD_CPOS_BPP_30			(7 << 27)
+#define JZ_LCD_CPOS_RGB555			BIT(30)
+#define JZ_LCD_CPOS_PREMULTIPLY_LCD		BIT(26)
+#define JZ_LCD_CPOS_COEFFICIENT_OFFSET		24
+#define JZ_LCD_CPOS_COEFFICIENT_0		0
+#define JZ_LCD_CPOS_COEFFICIENT_1		1
+#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1		2
+#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1	3
+
+#define JZ_LCD_RGBC_RGB_PADDING			BIT(15)
+#define JZ_LCD_RGBC_RGB_PADDING_FIRST		BIT(14)
+#define JZ_LCD_RGBC_422				BIT(8)
+#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE		BIT(7)
+
+#define JZ_LCD_PCFG_PRI_MODE			BIT(31)
+#define JZ_LCD_PCFG_HP_BST_4			(0 << 28)
+#define JZ_LCD_PCFG_HP_BST_8			(1 << 28)
+#define JZ_LCD_PCFG_HP_BST_16			(2 << 28)
+#define JZ_LCD_PCFG_HP_BST_32			(3 << 28)
+#define JZ_LCD_PCFG_HP_BST_64			(4 << 28)
+#define JZ_LCD_PCFG_HP_BST_16_CONT		(5 << 28)
+#define JZ_LCD_PCFG_HP_BST_DISABLE		(7 << 28)
+#define JZ_LCD_PCFG_THRESHOLD2_OFFSET		18
+#define JZ_LCD_PCFG_THRESHOLD1_OFFSET		9
+#define JZ_LCD_PCFG_THRESHOLD0_OFFSET		0
+
 struct device;
 struct drm_plane;
 struct drm_plane_state;
-- 
2.33.0



More information about the dri-devel mailing list