[REPOST PATCH v4 13/13] drm/msm/dsi: Add support for DSC configuration
Vinod Koul
vkoul at kernel.org
Thu Feb 10 10:34:23 UTC 2022
When DSC is enabled, we need to configure DSI registers accordingly and
configure the respective stream compression registers.
Add support to calculate the register setting based on DSC params and
timing information and configure these registers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Signed-off-by: Vinod Koul <vkoul at kernel.org>
---
drivers/gpu/drm/msm/dsi/dsi.xml.h | 10 +++
drivers/gpu/drm/msm/dsi/dsi_host.c | 109 ++++++++++++++++++++++++++++-
2 files changed, 118 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
index 49b551ad1bff..c1c85df58c4b 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
@@ -706,4 +706,14 @@ static inline uint32_t DSI_VERSION_MAJOR(uint32_t val)
#define REG_DSI_CPHY_MODE_CTRL 0x000002d4
+#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL 0x0000029c
+
+#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL2 0x000002a0
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL 0x000002a4
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2 0x000002a8
+
+#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL3 0x000002ac
+
#endif /* DSI_XML */
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 438c80750682..3d8d5a1daaa3 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -908,6 +908,20 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
dsi_write(msm_host, REG_DSI_CPHY_MODE_CTRL, BIT(0));
}
+static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc,
+ int pic_width, int pic_height)
+{
+ if (!dsc || !pic_width || !pic_height) {
+ pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", pic_width, pic_height);
+ return -EINVAL;
+ }
+
+ dsc->drm->pic_width = pic_width;
+ dsc->drm->pic_height = pic_height;
+
+ return 0;
+}
+
static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
{
struct drm_display_mode *mode = msm_host->mode;
@@ -940,7 +954,68 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
hdisplay /= 2;
}
+ if (msm_host->dsc) {
+ struct msm_display_dsc_config *dsc = msm_host->dsc;
+
+ /* update dsc params with timing params */
+ dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay);
+ DBG("Mode Width- %d x Height %d\n", dsc->drm->pic_width, dsc->drm->pic_height);
+
+ /* we do the calculations for dsc parameters here so that
+ * panel can use these parameters
+ */
+ dsi_populate_dsc_params(dsc);
+
+ /* Divide the display by 3 but keep back/font porch and
+ * pulse width same
+ */
+ h_total -= hdisplay;
+ hdisplay /= 3;
+ h_total += hdisplay;
+ ha_end = ha_start + hdisplay;
+ }
+
if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) {
+ if (msm_host->dsc) {
+ struct msm_display_dsc_config *dsc = msm_host->dsc;
+ u32 reg, intf_width, slice_per_intf;
+ u32 total_bytes_per_intf;
+
+ /* first calculate dsc parameters and then program
+ * compress mode registers
+ */
+ intf_width = hdisplay;
+ slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm->slice_width);
+
+ dsc->drm->slice_count = 1;
+ dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * 8, 8);
+ total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
+
+ dsc->eol_byte_num = total_bytes_per_intf % 3;
+ dsc->pclk_per_line = DIV_ROUND_UP(total_bytes_per_intf, 3);
+ dsc->bytes_per_pkt = dsc->bytes_in_slice * dsc->drm->slice_count;
+ dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
+
+ reg = dsc->bytes_per_pkt << 16;
+ reg |= (0x0b << 8); /* dtype of compressed image */
+
+ /* pkt_per_line:
+ * 0 == 1 pkt
+ * 1 == 2 pkt
+ * 2 == 4 pkt
+ * 3 pkt is not supported
+ * above translates to ffs() - 1
+ */
+ reg |= (ffs(dsc->pkt_per_line) - 1) << 6;
+
+ dsc->eol_byte_num = total_bytes_per_intf % 3;
+ reg |= dsc->eol_byte_num << 4;
+ reg |= 1;
+
+ dsi_write(msm_host,
+ REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg);
+ }
+
dsi_write(msm_host, REG_DSI_ACTIVE_H,
DSI_ACTIVE_H_START(ha_start) |
DSI_ACTIVE_H_END(ha_end));
@@ -959,8 +1034,40 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi)
DSI_ACTIVE_VSYNC_VPOS_START(vs_start) |
DSI_ACTIVE_VSYNC_VPOS_END(vs_end));
} else { /* command mode */
+ if (msm_host->dsc) {
+ struct msm_display_dsc_config *dsc = msm_host->dsc;
+ u32 reg, reg_ctrl, reg_ctrl2;
+ u32 slice_per_intf, bytes_in_slice, total_bytes_per_intf;
+
+ reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL);
+ reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2);
+
+ slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm->slice_width);
+ bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width *
+ dsc->drm->bits_per_pixel, 8);
+ dsc->drm->slice_chunk_size = bytes_in_slice;
+ total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf;
+ dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count;
+
+ reg = 0x39 << 8;
+ reg |= ffs(dsc->pkt_per_line) << 6;
+
+ dsc->eol_byte_num = total_bytes_per_intf % 3;
+ reg |= dsc->eol_byte_num << 4;
+ reg |= 1;
+
+ reg_ctrl |= reg;
+ reg_ctrl2 |= bytes_in_slice;
+
+ dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg);
+ dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2);
+ }
+
/* image data and 1 byte write_memory_start cmd */
- wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
+ if (!msm_host->dsc)
+ wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1;
+ else
+ wc = mode->hdisplay / 2 + 1;
dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL,
DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |
--
2.31.1
More information about the dri-devel
mailing list