[PATCH v5 19/23] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi

[Sascha Hauer]

On Thu, Feb 10, 2022 at 01:10:32AM +0100, Johan Jonker wrote:
> Hi Sascha,
> 
> Something with port and endpoint gives notifications.
> Somehow with the conversion of rockchip,dw-hdmi.txt to YAML not all SoC
> options were checked/covered (see rk3328 and rk3568).
> 
> Allow multiple vop:
> port or
> port at 0
> 1x vop -> endpoint
> 
> 2x vop -> endpoint at 0
>        -> endpoint at 1
> 
> Also allow for connector:
> (not all existing DT have this yet)
> port at 1
>       -> endpoint
> 
> See also at graph.yaml

Ok, let me see if I get this right. The HDMI can either have one or two
ports. It has one when the HDMI connector is not described in the device
tree and two when it is. Also the first (or only) port can have one or
two endpoints. It has one endpoint when the SoC has a single VOP and two
endpoints when the SoC has two VOPs.

It's been a painful morning because my YAML knowledge is fairly limited,
but here's what I came up with:

  ports:
    $ref: /schemas/graph.yaml#/properties/ports
    unevaluatedProperties: false
    patternProperties:
      "^port(@0)?$":
        $ref: /schemas/graph.yaml#/properties/port
        description: Input of the DWC HDMI TX
        properties:
          endpoint:
            description: Connection to the VOP
          endpoint at 0:
            description: Connection to the VOPB
          endpoint at 1:
            description: Connection to the VOPL
    properties:
      port at 1:
        $ref: /schemas/graph.yaml#/properties/port
        description: Output of the DWC HDMI TX

Does this look sane to you? With this a make dtbs_check on this binding
doesn't generate warnings anymore, and even better it does generate
warnings when I add some wrong nodes/properties to the dts files.

> ===
> 
> dtc -I dtb -O dts rk3568-evb1-v10.dtb
> <stdout>: Warning (avoid_unnecessary_addr_size):
> /hdmi at fe0a0000/ports/port at 1: unnecessary #address-cells/#size-cells
> without "ranges" or child "reg" property
> <stdout>: Warning (graph_child_address): /hdmi at fe0a0000/ports/port at 0:
> graph node has single child node 'endpoint at 0',
> #address-cells/#size-cells are not necessary
> <stdout>: Warning (graph_child_address): /hdmi at fe0a0000/ports/port at 1:
> graph node has single child node 'endpoint', #address-cells/#size-cells
> are not necessary

That's easy. I dropped the @0 suffix and reg property from the node.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |