[PATCH v2 7/8] drm/msm/dpu: pull connector from dpu_encoder_phys to dpu_encoder_virt

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Tue Feb 15 14:16:42 UTC 2022


All physical encoders used by virtual encoder share the same connector,
so pull the connector field from dpu_encoder_phys into dpu_encoder_virt
structure.

Reviewed-by: Abhinav Kumar <quic_abhinavk at quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c      | 11 ++++++-----
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h |  2 --
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
index ae60d415c66d..fa1dc088a672 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
@@ -143,6 +143,7 @@ enum dpu_enc_rc_states {
  *			link between encoder/crtc. However in this case we need
  *			to track crtc in the disable() hook which is called
  *			_after_ encoder_mask is cleared.
+ * @connector:		If a mode is set, cached pointer to the active connector
  * @crtc_kickoff_cb:		Callback into CRTC that will flush & start
  *				all CTL paths
  * @crtc_kickoff_cb_data:	Opaque user data given to crtc_kickoff_cb
@@ -183,6 +184,7 @@ struct dpu_encoder_virt {
 	bool intfs_swapped;
 
 	struct drm_crtc *crtc;
+	struct drm_connector *connector;
 
 	struct dentry *debugfs_root;
 	struct mutex enc_lock;
@@ -1010,6 +1012,8 @@ static void dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc,
 
 	cstate->num_mixers = num_lm;
 
+	dpu_enc->connector = conn_state->connector;
+
 	for (i = 0; i < dpu_enc->num_phys_encs; i++) {
 		int num_blk;
 		struct dpu_hw_blk *hw_blk[MAX_CHANNELS_PER_ENC];
@@ -1047,7 +1051,6 @@ static void dpu_encoder_virt_atomic_mode_set(struct drm_encoder *drm_enc,
 			return;
 		}
 
-		phys->connector = conn_state->connector;
 		phys->cached_mode = crtc_state->adjusted_mode;
 		if (phys->ops.atomic_mode_set)
 			phys->ops.atomic_mode_set(phys, crtc_state, conn_state);
@@ -1081,7 +1084,7 @@ static void _dpu_encoder_virt_enable_helper(struct drm_encoder *drm_enc)
 
 	if (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_DSI &&
 			!WARN_ON(dpu_enc->num_phys_encs == 0)) {
-		unsigned bpc = dpu_enc->phys_encs[0]->connector->display_info.bpc;
+		unsigned bpc = dpu_enc->connector->display_info.bpc;
 		for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) {
 			if (!dpu_enc->hw_pp[i])
 				continue;
@@ -1180,9 +1183,7 @@ static void dpu_encoder_virt_disable(struct drm_encoder *drm_enc)
 
 	dpu_encoder_resource_control(drm_enc, DPU_ENC_RC_EVENT_STOP);
 
-	for (i = 0; i < dpu_enc->num_phys_encs; i++) {
-		dpu_enc->phys_encs[i]->connector = NULL;
-	}
+	dpu_enc->connector = NULL;
 
 	DPU_DEBUG_ENC(dpu_enc, "encoder disabled\n");
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
index 6309c5e30d20..43ce56109c41 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
@@ -178,7 +178,6 @@ struct dpu_encoder_irq {
  *	tied to a specific panel / sub-panel. Abstract type, sub-classed by
  *	phys_vid or phys_cmd for video mode or command mode encs respectively.
  * @parent:		Pointer to the containing virtual encoder
- * @connector:		If a mode is set, cached pointer to the active connector
  * @ops:		Operations exposed to the virtual encoder
  * @parent_ops:		Callbacks exposed by the parent to the phys_enc
  * @hw_mdptop:		Hardware interface to the top registers
@@ -207,7 +206,6 @@ struct dpu_encoder_irq {
  */
 struct dpu_encoder_phys {
 	struct drm_encoder *parent;
-	struct drm_connector *connector;
 	struct dpu_encoder_phys_ops ops;
 	const struct dpu_encoder_virt_ops *parent_ops;
 	struct dpu_hw_mdp *hw_mdptop;
-- 
2.34.1



More information about the dri-devel mailing list