[PATCH] drm/msm/dsi/phy: fix 7nm v4.0 settings for C-PHY mode

[Dmitry Baryshkov]

The dsi_7nm_phy_enable() disagrees with downstream for
glbl_str_swi_cal_sel_ctrl and glbl_hstx_str_ctrl_0 values. Update
programmed settings to match downstream driver. To remove the
possibility for such errors in future drop less_than_1500_mhz
assignment and specify settings explicitly.

Fixes: 5ac178381d26 ("drm/msm/dsi: support CPHY mode for 7nm pll/phy")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 36eb6109cb88..6e506feb111f 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -864,20 +864,26 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 	/* Alter PHY configurations if data rate less than 1.5GHZ*/
 	less_than_1500_mhz = (clk_req->bitclk_rate <= 1500000000);
 
-	/* For C-PHY, no low power settings for lower clk rate */
-	if (phy->cphy_mode)
-		less_than_1500_mhz = false;
-
 	if (phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
 		vreg_ctrl_0 = less_than_1500_mhz ? 0x53 : 0x52;
-		glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d :  0x00;
-		glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x39 :  0x3c;
+		if (phy->cphy_mode) {
+			glbl_rescode_top_ctrl = 0x00;
+			glbl_rescode_bot_ctrl = 0x3c;
+		} else {
+			glbl_rescode_top_ctrl = less_than_1500_mhz ? 0x3d :  0x00;
+			glbl_rescode_bot_ctrl = less_than_1500_mhz ? 0x39 :  0x3c;
+		}
 		glbl_str_swi_cal_sel_ctrl = 0x00;
 		glbl_hstx_str_ctrl_0 = 0x88;
 	} else {
 		vreg_ctrl_0 = less_than_1500_mhz ? 0x5B : 0x59;
-		glbl_str_swi_cal_sel_ctrl = less_than_1500_mhz ? 0x03 : 0x00;
-		glbl_hstx_str_ctrl_0 = less_than_1500_mhz ? 0x66 : 0x88;
+		if (phy->cphy_mode) {
+			glbl_str_swi_cal_sel_ctrl = 0x03;
+			glbl_hstx_str_ctrl_0 = 0x66;
+		} else {
+			glbl_str_swi_cal_sel_ctrl = less_than_1500_mhz ? 0x03 : 0x00;
+			glbl_hstx_str_ctrl_0 = less_than_1500_mhz ? 0x66 : 0x88;
+		}
 		glbl_rescode_top_ctrl = 0x03;
 		glbl_rescode_bot_ctrl = 0x3c;
 	}
-- 
2.34.1