[PATCH v9 3/4] Documentation/dt: Add descriptions for loongson display controller

[Krzysztof Kozlowski]

On 17/02/2022 11:55, Sui Jingfeng wrote:
> From: suijingfeng <suijingfeng at loongson.cn>
> 
> Add DT documentation for loongson display controller found in
> LS2K1000, LS2K0500, LS7A1000 and LS7A2000.
> 
> v2: DT binding docs and includes should be a separate patch,
>     fix a warnning because of that.
> 
> Signed-off-by: suijingfeng <suijingfeng at loongson.cn>
> Signed-off-by: Sui Jingfeng <15330273260 at 189.cn>
> ---
>  .../loongson/loongson,display-controller.yaml | 114 ++++++++++++++++++
>  1 file changed, 114 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
> new file mode 100644
> index 000000000000..94229519022a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
> @@ -0,0 +1,114 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/loongson,display-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Loongson LS7A2000/LS7A1000/LS2K1000/LS2K0500 Display Controller Device Tree Bindings
> +
> +maintainers:
> +  - Sui Jingfeng <suijingfeng at loongson.cn>
> +
> +description: |+
> +
> +  Loongson display controllers are simple which require scanout buffers
> +  to be physically contiguous. LS2K1000/LS2K0500 is a SOC, only system
> +  memory is available. LS7A1000/LS7A2000 is bridge chip which is equipped
> +  with a dedicated video ram which is 64MB or more.
> +
> +  For LS7A1000, there are 4 dedicated GPIOs whose control register is
> +  located at the DC register space. They are used to emulate two way i2c,
> +  One for DVO0, another for DVO1.
> +
> +  LS2K1000 and LS2K0500 SoC grab i2c adapter from other module, either
> +  general purpose GPIO emulated i2c or hardware i2c in the SoC.
> +
> +  LSDC has two display pipes, each way has a DVO interface which provide
> +  RGB888 signals, vertical & horizontal synchronisations, data enable and
> +  the pixel clock. LSDC has two CRTC, each CRTC is able to scanout from
> +  1920x1080 resolution at 60Hz. Each CRTC has two FB address registers.
> +
> +  LSDC's display pipeline have several components as below description,
> +
> +  The display controller in LS7A1000:
> +    ___________________                                     _________
> +    |            -------|                                   |         |
> +    |  CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monotor |
> +    |  _   _     -------|        ^             ^            |_________|
> +    | | | | |    -------|        |             |
> +    | |_| |_|    | i2c0 <--------+-------------+
> +    |            -------|
> +    |   DC IN LS7A1000  |
> +    |  _   _     -------|
> +    | | | | |    | i2c1 <--------+-------------+
> +    | |_| |_|    -------|        |             |             _________
> +    |            -------|        |             |            |         |
> +    |  CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> |  Panel  |
> +    |            -------|                                   |_________|
> +    |___________________|
> +
> +  Simple usage of LS7A1000 with LS3A4000 CPU:
> +
> +    +------+            +-----------------------------------+
> +    | DDR4 |            |  +-------------------+            |
> +    +------+            |  | PCIe Root complex |   LS7A1000 |
> +       || MC0           |  +--++---------++----+            |
> +  +----------+  HT 3.0  |     ||         ||                 |
> +  | LS3A4000 |<-------->| +---++---+  +--++--+    +---------+   +------+
> +  |   CPU    |<-------->| | GC1000 |  | LSDC |<-->| DDR3 MC |<->| VRAM |
> +  +----------+          | +--------+  +-+--+-+    +---------+   +------+
> +       || MC1           +---------------|--|----------------+
> +    +------+                            |  |
> +    | DDR4 |          +-------+   DVO0  |  |  DVO1   +------+
> +    +------+   VGA <--|ADV7125|<--------+  +-------->|TFP410|--> DVI/HDMI
> +                      +-------+                      +------+
> +
> +  The display controller in LS2K1000/LS2K0500:
> +     ___________________                                     _________
> +    |            -------|                                   |         |
> +    |  CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monotor |
> +    |  _   _     -------|        ^              ^           |_________|
> +    | | | | |           |        |              |
> +    | |_| |_|           |     +------+          |
> +    |                   <---->| i2c0 |<---------+
> +    |   DC IN LS2K1000  |     +------+
> +    |  _   _            |     +------+
> +    | | | | |           <---->| i2c1 |----------+
> +    | |_| |_|           |     +------+          |            _________
> +    |            -------|        |              |           |         |
> +    |  CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> |  Panel  |
> +    |            -------|                                   |_________|
> +    |___________________|
> +
> +properties:
> +  compatible:
> +    enum:
> +      - loongson,ls7a2000-dc
> +      - loongson,ls7a1000-dc
> +      - loongson,ls2k1000-dc
> +      - loongson,ls2k0500-dc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    minItems: 1

No need for minItems, if you have maxItems:1.

> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    lsdc: display-controller at 6,1 {
> +        compatible = "loongson,ls7a1000-dc";
> +        reg = <0x3100 0x0 0x0 0x0 0x0>;
> +        interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-parent = <&pic>;
> +    };

I still do not think you actually tested it with dt_bindings_check...


Best regards,
Krzysztof