[PATCH V2 08/11] drm/bridge: tc358767: Move bridge ops setup into tc_probe_edp_bridge_endpoint()

[Lucas Stach]

Am Freitag, dem 18.02.2022 um 02:00 +0100 schrieb Marek Vasut:
> The bridge ops are specific to the bridge configuration, move them
> into tc_probe_edp_bridge_endpoint() to permit cleaner addition of
> DSI-to-DPI mode. No functional change.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Jonas Karlman <jonas at kwiboo.se>
> Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
> Cc: Maxime Ripard <maxime at cerno.tech>
> Cc: Neil Armstrong <narmstrong at baylibre.com>
> Cc: Sam Ravnborg <sam at ravnborg.org>
> ---
> V2: - New patch
> ---
>  drivers/gpu/drm/bridge/tc358767.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
> index 55b7f3fb9eec9..7dae18de76c97 100644
> --- a/drivers/gpu/drm/bridge/tc358767.c
> +++ b/drivers/gpu/drm/bridge/tc358767.c
> @@ -1676,6 +1676,11 @@ static int tc_probe_edp_bridge_endpoint(struct tc_data *tc)
>  		tc->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
>  	}
>  
> +	tc->bridge.funcs = &tc_bridge_funcs;

Could you please also rename those to tc_edp_bridge_funcs? Otherwise I
agree with this patch.

> +	if (tc->hpd_pin >= 0)
> +		tc->bridge.ops |= DRM_BRIDGE_OP_DETECT;
> +	tc->bridge.ops |= DRM_BRIDGE_OP_EDID;
> +
>  	return ret;
>  }
>  
> @@ -1757,11 +1762,6 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  	if (ret)
>  		return ret;
>  
> -	tc->bridge.funcs = &tc_bridge_funcs;
> -	if (tc->hpd_pin >= 0)
> -		tc->bridge.ops |= DRM_BRIDGE_OP_DETECT;
> -	tc->bridge.ops |= DRM_BRIDGE_OP_EDID;
> -
>  	tc->bridge.of_node = dev->of_node;
>  	drm_bridge_add(&tc->bridge);
>