[PATCH 2/3] drm/i915/gt: Make the heartbeat play nice with long pre-emption timeouts

John.C.Harrison at Intel.com John.C.Harrison at Intel.com
Fri Feb 18 21:33:06 UTC 2022


From: John Harrison <John.C.Harrison at Intel.com>

Compute workloads are inherantly not pre-emptible for long periods on
current hardware. As a workaround for this, the pre-emption timeout
for compute capable engines was disabled. This is undesirable with GuC
submission as it prevents per engine reset of hung contexts. Hence the
next patch will re-enable the timeout but bumped up by an order of
magnititude.

However, the heartbeat might not respect that. Depending upon current
activity, a pre-emption to the heartbeat pulse might not even be
attempted until the last heartbeat period. Which means that only one
period is granted for the pre-emption to occur. With the aforesaid
bump, the pre-emption timeout could be significantly larger than this
heartbeat period.

So adjust the heartbeat code to take the pre-emption timeout into
account. When it reaches the final (high priority) period, it now
ensures the delay before hitting reset is bigger than the pre-emption
timeout.

Signed-off-by: John Harrison <John.C.Harrison at Intel.com>
---
 drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c b/drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c
index a3698f611f45..72a82a6085e0 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c
+++ b/drivers/gpu/drm/i915/gt/intel_engine_heartbeat.c
@@ -22,9 +22,25 @@
 
 static bool next_heartbeat(struct intel_engine_cs *engine)
 {
+	struct i915_request *rq;
 	long delay;
 
 	delay = READ_ONCE(engine->props.heartbeat_interval_ms);
+
+	rq = engine->heartbeat.systole;
+	if (rq && rq->sched.attr.priority >= I915_PRIORITY_BARRIER) {
+		long longer;
+
+		/*
+		 * The final try is at the highest priority possible. Up until now
+		 * a pre-emption might not even have been attempted. So make sure
+		 * this last attempt allows enough time for a pre-emption to occur.
+		 */
+		longer = READ_ONCE(engine->props.preempt_timeout_ms) * 2;
+		if (longer > delay)
+			delay = longer;
+	}
+
 	if (!delay)
 		return false;
 
-- 
2.25.1



More information about the dri-devel mailing list