[PATCH v1,2/3] drm/mediatek: Add TOPCKGEN select mux control dpi_clk

xinlei.lee at mediatek.com xinlei.lee at mediatek.com
Fri Feb 25 09:53:52 UTC 2022


From: Xinlei Lee <xinlei.lee at mediatek.com>

Dpi_clk is controlled by the mux selected
by TOPCKGEN and APMIXEDSYS can support small resolution.

Signed-off-by: Xinlei Lee <xinlei.lee at mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 38 ++++++++++++++++++++++++++----
 1 file changed, 34 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 4554e2de1430..bad686817e29 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -63,6 +63,14 @@ enum mtk_dpi_out_color_format {
 	MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL
 };
 
+enum TVDPLL_CLK {
+	TVDPLL_PLL = 0,
+	TVDPLL_D2 = 2,
+	TVDPLL_D4 = 4,
+	TVDPLL_D8 = 8,
+	TVDPLL_D16 = 16,
+};
+
 struct mtk_dpi {
 	struct drm_encoder encoder;
 	struct drm_bridge bridge;
@@ -73,6 +81,7 @@ struct mtk_dpi {
 	struct clk *engine_clk;
 	struct clk *pixel_clk;
 	struct clk *tvd_clk;
+	struct clk *pclk_src[5];
 	int irq;
 	struct drm_display_mode mode;
 	const struct mtk_dpi_conf *conf;
@@ -459,6 +468,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	struct videomode vm = { 0 };
 	unsigned long pll_rate;
 	unsigned int factor;
+	struct clk *clksrc = NULL;
 
 	/* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */
 	factor = dpi->conf->cal_factor(mode->clock);
@@ -473,11 +483,26 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 
 	vm.pixelclock = pll_rate / factor;
 	if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
-	    (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
-		clk_set_rate(dpi->pixel_clk, vm.pixelclock * 2);
-	else
-		clk_set_rate(dpi->pixel_clk, vm.pixelclock);
+	    (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE)) {
+		if (factor == 8)
+			clksrc = dpi->pclk_src[2];
+		else if (factor == 4)
+			clksrc = dpi->pclk_src[1];
+		else
+			clksrc = dpi->pclk_src[1];
+		}
+	else {
+		if (factor == 8)
+			clksrc = dpi->pclk_src[3];
+		else if (factor == 4)
+			clksrc = dpi->pclk_src[2];
+		else
+			clksrc = dpi->pclk_src[2];
+	}
 
+	clk_prepare_enable(dpi->pixel_clk);
+	clk_set_parent(dpi->pixel_clk, clksrc);
+	clk_disable_unprepare(dpi->pixel_clk);
 
 	vm.pixelclock = clk_get_rate(dpi->pixel_clk);
 
@@ -893,6 +918,11 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	dpi->pclk_src[1] = devm_clk_get_optional(dev, "tvdpll_d2");
+	dpi->pclk_src[2] = devm_clk_get_optional(dev, "tvdpll_d4");
+	dpi->pclk_src[3] = devm_clk_get_optional(dev, "tvdpll_d8");
+	dpi->pclk_src[4] = devm_clk_get_optional(dev, "tvdpll_d16");
+
 	dpi->irq = platform_get_irq(pdev, 0);
 	if (dpi->irq <= 0)
 		return -EINVAL;
-- 
2.18.0



More information about the dri-devel mailing list