[PATCH v5 5/7] drm/aspeed: Add reset and clock for AST2600

Joel Stanley joel at jms.id.au
Mon Feb 28 09:50:42 UTC 2022


On Wed, 8 Dec 2021 at 01:34, Tommy Haung <tommy_huang at aspeedtech.com> wrote:
>
> From: tommy-huang <tommy_huang at aspeedtech.com>
>
> Add more reset and clock select code for AST2600.
> The gfx_flags parameter was added for chip caps idenified.

Can you tell me a bit more about the two reset lines:

What is the CRT reset line controlling?

What does the engine reset line control?

Can we use devm_reset_control_array_get() to get whichever are
specified in the device tree, so we don't need to have different logic
for the 2600 and earlier chips?



>
> Signed-off-by: tommy-huang <tommy_huang at aspeedtech.com>
> ---
>  drivers/gpu/drm/aspeed/aspeed_gfx.h      | 16 +++++++-
>  drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c | 16 ++++++++
>  drivers/gpu/drm/aspeed/aspeed_gfx_drv.c  | 50 ++++++++++++++++++++++--
>  3 files changed, 77 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx.h b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> index 4e6a442c3886..2c733225d3c7 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx.h
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx.h
> @@ -8,7 +8,8 @@ struct aspeed_gfx {
>         struct drm_device               drm;
>         void __iomem                    *base;
>         struct clk                      *clk;
> -       struct reset_control            *rst;
> +       struct reset_control            *rst_crt;
> +       struct reset_control            *rst_engine;
>         struct regmap                   *scu;
>
>         u32                             dac_reg;
> @@ -16,6 +17,7 @@ struct aspeed_gfx {
>         u32                             vga_scratch_reg;
>         u32                             throd_val;
>         u32                             scan_line_max;
> +       u32                             flags;
>
>         struct drm_simple_display_pipe  pipe;
>         struct drm_connector            connector;
> @@ -106,3 +108,15 @@ int aspeed_gfx_create_output(struct drm_device *drm);
>  /* CRT_THROD */
>  #define CRT_THROD_LOW(x)               (x)
>  #define CRT_THROD_HIGH(x)              ((x) << 8)
> +
> +/* SCU control */
> +#define SCU_G6_CLK_COURCE              0x300
> +
> +/* GFX FLAGS */
> +#define RESET_MASK                     BIT(0)
> +#define RESET_G6                       BIT(0)
> +#define CLK_MASK                       BIT(4)
> +#define CLK_G6                         BIT(4)
> +
> +#define G6_CLK_MASK                    (BIT(8) | BIT(9) | BIT(10))
> +#define G6_USB_40_CLK                  BIT(9)
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> index 827e62c1daba..e0975ecda92d 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> @@ -77,6 +77,18 @@ static void aspeed_gfx_disable_controller(struct aspeed_gfx *priv)
>         regmap_update_bits(priv->scu, priv->dac_reg, BIT(16), 0);
>  }
>
> +static void aspeed_gfx_set_clk(struct aspeed_gfx *priv)
> +{
> +       switch (priv->flags & CLK_MASK) {
> +       case CLK_G6:
> +               regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, 0x0);
> +               regmap_update_bits(priv->scu, SCU_G6_CLK_COURCE, G6_CLK_MASK, G6_USB_40_CLK);
> +               break;
> +       default:
> +               break;
> +       }
> +}
> +
>  static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
>  {
>         struct drm_display_mode *m = &priv->pipe.crtc.state->adjusted_mode;
> @@ -87,6 +99,8 @@ static void aspeed_gfx_crtc_mode_set_nofb(struct aspeed_gfx *priv)
>         if (err)
>                 return;
>
> +       aspeed_gfx_set_clk(priv);
> +
>  #if 0
>         /* TODO: we have only been able to test with the 40MHz USB clock. The
>          * clock is fixed, so we cannot adjust it here. */
> @@ -193,6 +207,7 @@ static void aspeed_gfx_pipe_update(struct drm_simple_display_pipe *pipe,
>  static int aspeed_gfx_enable_vblank(struct drm_simple_display_pipe *pipe)
>  {
>         struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
> +
>         u32 reg = readl(priv->base + CRT_CTRL1);
>
>         /* Clear pending VBLANK IRQ */
> @@ -207,6 +222,7 @@ static int aspeed_gfx_enable_vblank(struct drm_simple_display_pipe *pipe)
>  static void aspeed_gfx_disable_vblank(struct drm_simple_display_pipe *pipe)
>  {
>         struct aspeed_gfx *priv = drm_pipe_to_aspeed_gfx(pipe);
> +
>         u32 reg = readl(priv->base + CRT_CTRL1);
>
>         reg &= ~CRT_CTRL_VERTICAL_INTR_EN;
> diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> index d10246b1d1c2..59a0de92650f 100644
> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> @@ -64,6 +64,7 @@ struct aspeed_gfx_config {
>         u32 vga_scratch_reg;    /* VGA scratch register in SCU */
>         u32 throd_val;          /* Default Threshold Seting */
>         u32 scan_line_max;      /* Max memory size of one scan line */
> +       u32 gfx_flags;          /* Flags for gfx chip caps */
>  };
>
>  static const struct aspeed_gfx_config ast2400_config = {
> @@ -72,6 +73,7 @@ static const struct aspeed_gfx_config ast2400_config = {
>         .vga_scratch_reg = 0x50,
>         .throd_val = CRT_THROD_LOW(0x1e) | CRT_THROD_HIGH(0x12),
>         .scan_line_max = 64,
> +       .gfx_flags = 0,
>  };
>
>  static const struct aspeed_gfx_config ast2500_config = {
> @@ -80,6 +82,7 @@ static const struct aspeed_gfx_config ast2500_config = {
>         .vga_scratch_reg = 0x50,
>         .throd_val = CRT_THROD_LOW(0x24) | CRT_THROD_HIGH(0x3c),
>         .scan_line_max = 128,
> +       .gfx_flags = 0,
>  };
>
>  static const struct aspeed_gfx_config ast2600_config = {
> @@ -88,6 +91,7 @@ static const struct aspeed_gfx_config ast2600_config = {
>         .vga_scratch_reg = 0x50,
>         .throd_val = CRT_THROD_LOW(0x50) | CRT_THROD_HIGH(0x70),
>         .scan_line_max = 128,
> +       .gfx_flags = RESET_G6 | CLK_G6,
>  };
>
>  static const struct of_device_id aspeed_gfx_match[] = {
> @@ -138,6 +142,44 @@ static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
>         return IRQ_NONE;
>  }
>
> +static int aspeed_gfx_reset(struct drm_device *drm)
> +{
> +       struct platform_device *pdev = to_platform_device(drm->dev);
> +       struct aspeed_gfx *priv = to_aspeed_gfx(drm);
> +
> +       switch (priv->flags & RESET_MASK) {
> +       case RESET_G6:
> +               priv->rst_crt = devm_reset_control_get(&pdev->dev, "crt");
> +               if (IS_ERR(priv->rst_crt)) {
> +                       dev_err(&pdev->dev,
> +                               "missing or invalid crt reset controller device tree entry");
> +                       return PTR_ERR(priv->rst_crt);
> +               }
> +               reset_control_deassert(priv->rst_crt);
> +
> +               priv->rst_engine = devm_reset_control_get(&pdev->dev, "engine");
> +               if (IS_ERR(priv->rst_engine)) {
> +                       dev_err(&pdev->dev,
> +                               "missing or invalid engine reset controller device tree entry");
> +                       return PTR_ERR(priv->rst_engine);
> +               }
> +               reset_control_deassert(priv->rst_engine);
> +               break;
> +
> +       default:
> +               priv->rst_crt = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> +               if (IS_ERR(priv->rst_crt)) {
> +                       dev_err(&pdev->dev,
> +                               "missing or invalid reset controller device tree entry");
> +                       return PTR_ERR(priv->rst_crt);
> +               }
> +               reset_control_deassert(priv->rst_crt);
> +               break;
> +       }
> +
> +       return 0;
> +}
> +
>  static int aspeed_gfx_load(struct drm_device *drm)
>  {
>         struct platform_device *pdev = to_platform_device(drm->dev);
> @@ -163,6 +205,7 @@ static int aspeed_gfx_load(struct drm_device *drm)
>         priv->vga_scratch_reg = config->vga_scratch_reg;
>         priv->throd_val = config->throd_val;
>         priv->scan_line_max = config->scan_line_max;
> +       priv->flags = config->gfx_flags;
>
>         priv->scu = syscon_regmap_lookup_by_phandle(np, "syscon");
>         if (IS_ERR(priv->scu)) {
> @@ -186,13 +229,12 @@ static int aspeed_gfx_load(struct drm_device *drm)
>                 return ret;
>         }
>
> -       priv->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> -       if (IS_ERR(priv->rst)) {
> +       ret = aspeed_gfx_reset(drm);
> +       if (ret) {
>                 dev_err(&pdev->dev,
>                         "missing or invalid reset controller device tree entry");
> -               return PTR_ERR(priv->rst);
> +               return ret;
>         }
> -       reset_control_deassert(priv->rst);
>
>         priv->clk = devm_clk_get(drm->dev, NULL);
>         if (IS_ERR(priv->clk)) {
> --
> 2.17.1
>


More information about the dri-devel mailing list