[PATCH v3 09/21] dept: Apply Dept to seqlock

Byungchul Park byungchul.park at lge.com
Mon Feb 28 09:56:48 UTC 2022


Makes Dept able to track dependencies by seqlock with adding wait
annotation on read side of seqlock.

Signed-off-by: Byungchul Park <byungchul.park at lge.com>
---
 include/linux/seqlock.h | 59 ++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 58 insertions(+), 1 deletion(-)

diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index 37ded6b..6e8ecd7 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -23,6 +23,25 @@
 
 #include <asm/processor.h>
 
+#ifdef CONFIG_DEPT
+#define DEPT_EVT_ALL		((1UL << DEPT_MAX_SUBCLASSES_EVT) - 1)
+#define dept_seq_wait(m, ip)	dept_wait(m, DEPT_EVT_ALL, ip, __func__, 0)
+#define dept_seq_writebegin(m, ip)				\
+do {								\
+	dept_ecxt_enter(m, 1UL, ip, __func__, "write_seqcount_end", 0);\
+	dept_ask_event(m);					\
+} while (0)
+#define dept_seq_writeend(m, ip)				\
+do {								\
+	dept_event(m, 1UL, ip, __func__);			\
+	dept_ecxt_exit(m, ip);					\
+} while (0)
+#else
+#define dept_seq_wait(m, ip)		do { } while (0)
+#define dept_seq_writebegin(m, ip)	do { } while (0)
+#define dept_seq_writeend(m, ip)	do { } while (0)
+#endif
+
 /*
  * The seqlock seqcount_t interface does not prescribe a precise sequence of
  * read begin/retry/end. For readers, typically there is a call to
@@ -148,7 +167,7 @@ static inline void seqcount_lockdep_reader_access(const seqcount_t *s)
  * This lock-unlock technique must be implemented for all of PREEMPT_RT
  * sleeping locks.  See Documentation/locking/locktypes.rst
  */
-#if defined(CONFIG_LOCKDEP) || defined(CONFIG_PREEMPT_RT)
+#if defined(CONFIG_LOCKDEP) || defined(CONFIG_DEPT) || defined(CONFIG_PREEMPT_RT)
 #define __SEQ_LOCK(expr)	expr
 #else
 #define __SEQ_LOCK(expr)
@@ -203,6 +222,22 @@ static inline void seqcount_lockdep_reader_access(const seqcount_t *s)
 	__SEQ_LOCK(locktype	*lock);					\
 } seqcount_##lockname##_t;						\
 									\
+static __always_inline void						\
+__seqprop_##lockname##_wait(const seqcount_##lockname##_t *s)		\
+{									\
+	__SEQ_LOCK(dept_seq_wait(&(lockmember)->dep_map.dmap, _RET_IP_));\
+}									\
+									\
+static __always_inline void						\
+__seqprop_##lockname##_writebegin(const seqcount_##lockname##_t *s)	\
+{									\
+}									\
+									\
+static __always_inline void						\
+__seqprop_##lockname##_writeend(const seqcount_##lockname##_t *s)	\
+{									\
+}									\
+									\
 static __always_inline seqcount_t *					\
 __seqprop_##lockname##_ptr(seqcount_##lockname##_t *s)			\
 {									\
@@ -271,6 +306,21 @@ static inline void __seqprop_assert(const seqcount_t *s)
 	lockdep_assert_preemption_disabled();
 }
 
+static inline void __seqprop_wait(seqcount_t *s)
+{
+	dept_seq_wait(&s->dep_map.dmap, _RET_IP_);
+}
+
+static inline void __seqprop_writebegin(seqcount_t *s)
+{
+	dept_seq_writebegin(&s->dep_map.dmap, _RET_IP_);
+}
+
+static inline void __seqprop_writeend(seqcount_t *s)
+{
+	dept_seq_writeend(&s->dep_map.dmap, _RET_IP_);
+}
+
 #define __SEQ_RT	IS_ENABLED(CONFIG_PREEMPT_RT)
 
 SEQCOUNT_LOCKNAME(raw_spinlock, raw_spinlock_t,  false,    s->lock,        raw_spin, raw_spin_lock(s->lock))
@@ -311,6 +361,9 @@ static inline void __seqprop_assert(const seqcount_t *s)
 #define seqprop_sequence(s)		__seqprop(s, sequence)
 #define seqprop_preemptible(s)		__seqprop(s, preemptible)
 #define seqprop_assert(s)		__seqprop(s, assert)
+#define seqprop_dept_wait(s)		__seqprop(s, wait)
+#define seqprop_dept_writebegin(s)	__seqprop(s, writebegin)
+#define seqprop_dept_writeend(s)	__seqprop(s, writeend)
 
 /**
  * __read_seqcount_begin() - begin a seqcount_t read section w/o barrier
@@ -360,6 +413,7 @@ static inline void __seqprop_assert(const seqcount_t *s)
 #define read_seqcount_begin(s)						\
 ({									\
 	seqcount_lockdep_reader_access(seqprop_ptr(s));			\
+	seqprop_dept_wait(s);						\
 	raw_read_seqcount_begin(s);					\
 })
 
@@ -512,6 +566,7 @@ static inline void do_raw_write_seqcount_end(seqcount_t *s)
 		preempt_disable();					\
 									\
 	do_write_seqcount_begin_nested(seqprop_ptr(s), subclass);	\
+	seqprop_dept_writebegin(s);					\
 } while (0)
 
 static inline void do_write_seqcount_begin_nested(seqcount_t *s, int subclass)
@@ -538,6 +593,7 @@ static inline void do_write_seqcount_begin_nested(seqcount_t *s, int subclass)
 		preempt_disable();					\
 									\
 	do_write_seqcount_begin(seqprop_ptr(s));			\
+	seqprop_dept_writebegin(s);					\
 } while (0)
 
 static inline void do_write_seqcount_begin(seqcount_t *s)
@@ -554,6 +610,7 @@ static inline void do_write_seqcount_begin(seqcount_t *s)
  */
 #define write_seqcount_end(s)						\
 do {									\
+	seqprop_dept_writeend(s);					\
 	do_write_seqcount_end(seqprop_ptr(s));				\
 									\
 	if (seqprop_preemptible(s))					\
-- 
1.9.1



More information about the dri-devel mailing list