[PATCH 2/2] drm/i2c/tda998x: Implement atomic_get_input_bus_fmts

[Laurent Pinchart]

Hi Fabio,

Thank you for the patch.

On Thu, Dec 30, 2021 at 10:39:30PM -0300, Fabio Estevam wrote:
> Implement the .atomic_get_input_bus_fmts callback to let the bridge
> indicate the pixel format it requires on the parallel bus to the LCDIF.
> 
> Based on Marek's commit db8b7ca5b232 ("drm/bridge: ti-sn65dsi83: Replace
> connector format patching with atomic_get_input_bus_fmts").
> 
> Tested on a imx6sx-udoo-neo board.
> 
> Suggested-by: Marek Vasut <marex at denx.de>
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> ---
>  drivers/gpu/drm/i2c/tda998x_drv.c | 29 +++++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> index adaa985af87e..d987481e97c1 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -1678,6 +1678,31 @@ static void tda998x_bridge_mode_set(struct drm_bridge *bridge,
>  	mutex_unlock(&priv->audio_mutex);
>  }
>  
> +#define MAX_INPUT_SEL_FORMATS  1
> +
> +static u32 *
> +tda998x_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> +				   struct drm_bridge_state *bridge_state,
> +				   struct drm_crtc_state *crtc_state,
> +				   struct drm_connector_state *conn_state,
> +				   u32 output_fmt,
> +				   unsigned int *num_input_fmts)
> +{
> +	u32 *input_fmts;
> +
> +	*num_input_fmts = 0;
> +
> +	input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
> +			     GFP_KERNEL);
> +	if (!input_fmts)
> +		return NULL;
> +
> +	input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> +	*num_input_fmts = 1;
> +
> +	return input_fmts;
> +}
> +
>  static const struct drm_bridge_funcs tda998x_bridge_funcs = {
>  	.attach = tda998x_bridge_attach,
>  	.detach = tda998x_bridge_detach,
> @@ -1685,6 +1710,10 @@ static const struct drm_bridge_funcs tda998x_bridge_funcs = {
>  	.atomic_disable = tda998x_bridge_atomic_disable,
>  	.mode_set = tda998x_bridge_mode_set,
>  	.atomic_enable = tda998x_bridge_atomic_enable,
> +	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> +	.atomic_reset = drm_atomic_helper_bridge_reset,

I think this should go to 1/2.

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> +	.atomic_get_input_bus_fmts = tda998x_atomic_get_input_bus_fmts,
>  };
>  
>  /* I2C driver functions */

-- 
Regards,

Laurent Pinchart